Displaying 20 results from an estimated 8000 matches similar to: "(no subject)"
2006 Mar 13
2
DISA & SPA3000 issues
Hi,
These days I run into something quite odd.
I have an A@H that was modified to meet our requirements.
We have a completely funtional DISA which we use pretty much all the
time.
I works flawlessly with incomming SIP calls from several providers,
IAX calls from FWD and with ZAP.
Recently we came out with a situation where it doesn't work... with
a
2005 Feb 27
0
FW: DISA and a long delay; ideas?
Jeez, I need to work out the shortcut to send an email which I keep pressing
by accident!!
-----Original Message-----
From: C. Tomlinson [mailto:asterisk_list@burntwires.com]
Sent: 27 February 2005 22:48
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] DISA and a long delay; ideas?
Many thanks, that was the problem.
I didn't paste the
2006 Apr 08
2
question about DISA
Lists,
?
? Hi, good day, i was being task to create a DISA access for internal
purpose of the company, i'm having a problem to work with it with
authentication, but i think it's really a straight forward thing to do,
can someone enlight me on this. thanks
?
sample code snippet
?
???? exten => 5,Goto(inward,s,1)
?
[inward]
?
?????????? exten => s,1,Disa(1234|outgoing)
?????????? ;
2004 Jul 05
2
Problem with BRI_STUF / direct connected ISDN-Phone
Deutsche ?bersetzung folgt / German version following
=====================================================
Hello,
i have Asterisk running with 2 ISDN-Cards.
One AVM Fritz for connection to german ISDN
and one HFC-compatible-Card (NT mode) for connection to ISDN-Phone (later:
ISDN-PBX).
Here is my actual installation:
ISDN -> Fritz - ASTERISK ? HFC-NT <- ISDN-Telephone
If i pick up my
2005 May 10
2
DISA
We are using DISA with local SIP users. The user enters in a 2 digit
code then they get a dialtone and the phone dials out. The problem is
that the calls waits 10 seconds after the outgoing number is dialed, no
matter what I put for the timeout values. Anyone else using DISA that
has run into this?
exten => _2X,1,Answer
exten => _2X,2,DigitTimeout(2)
exten =>
2009 Sep 02
2
DISA() fails to recognize dtmf where WaitExten() succeeds (DAHDI-PRI)
Is there any known reason that the DISA() routine should behave
differently than WaitExten() as far as recognizing DTMF tones? If
not, I suspect there's a bug here.
Try it yourself--two DID's on our PRI, numbers below let you test each routine:
It is my observation that some setups/phones DO and some DO NOT
express this variance.
--I could not show any variance on a sprint mobile phone
2007 Jan 22
1
2 ring delay before asterisk answer
I am a little green when it comes to all this but I am trying to connect
our PBX to an asterisk server using a TDM400 with 4 FXO modules. I am able
to dial an extension on my PBX handset and I get a dialtone from the PBX.
After 2 rings I then hear the asterisk server connect and I get a dialtone
from asterisk. I am then able to dial an extension on another asterisk
server.
My question is: How do
2005 Jul 20
1
Play Dialtone - get digits
I'd like to write a snippet of dialtone that plays dialtone and collects a
specific number of digits into a variable.
Sort of like READ but with a generated dialtone.
Naturally, I want the dialtone to stop playing after the first digit.
I can't find this anywhere.
Only thing I can think of is a no-password DISA. Is this the correct
method? Is there a better one?
</edg>
2006 Jun 05
2
DTMF and DISA
Hi Folks,
I'm trying to test out Asterisk overall.
I'm having some problems with DTMF. Currently I'm playing with DISA,
but I'm worried this will happen when I get to implementing AAs etc.
I have a free SIP trunk from IPKall that I'm trying to make work.
I'm able to receive calls, and I've now setup and extension with DISA
and a password.
I connect ok from the
2005 Aug 16
1
DISA over Zap (TE110P) issues on * STABLE 1.0.9
Hi !
Did anyone had issues/managed to solve issues with DISA over Zap channels on
* 1.0.X (STABLE) ?
I have a situatuion where DTMFs that should be recognized in DISA work over
SIP channels and do not work over ZAP channels (Zap channels are on TE110P)
I have in default context:
exten=> 299,1,DISA(no-password|default)
and I have SIP extension 200 in [default] and I have Zap trunk which
2004 Jul 12
1
FWD, DISA & DTMF
I can dial from an asterisk host to another one via FreeWorldDialup, on
the other side DISA service answer to me and i can ear dialtone.
But i cannot send DTMF and dial an extension on the DISA enabled
asterisk.....i've tried rfc2833 and inband...but nothing....any tips ???
Thanks,
--
Igor Barsanti
GPG Public key available at http://pgp.mit.edu
2004 Jan 30
0
Re: DISA and authcodes (was: t410p)
[moved from -dev, as the thread is better suited for -users]
At 5:10 PM -0600 1/30/04, James Sharp wrote:
> > I've pretty much got the routing covered at this point, I'm just not sure
>> how to get the Asterisk system to answer and give me dialtone immediately.
>> Any ideas or recommendations would be greatly appreciated.
>
>app_disa will give answer and give
2008 Nov 18
1
setting up callback
Greetings Asterisk users!
I'm trying to setup Asterisk system to act as a callback system together
with callcentric (http://callcentric.com) but it appears that I hit common
DTMF issue and I want to workaround this problem. Basically my current
setup is the following:
1) I have dedicated Asterisk server that it is linked to my callcentric
account
2) I have US phone number (DID) from
2006 Mar 22
3
Remote dialtone
Hi,
I have two asterisks connected via IAX2 trunk. The first * use dial
prefix 2XX, the second one 3XX.
Calls routing works OK.
But I don't know how to get dialtone of remote asterisk pbx.
I'd like to get dialtone of asterisk #2 after dialing 3 and dialtone of
asterisk #1 after dialing 2.
I know something about DISA but I'm not sure if it is a right way.
Can you give me advice?
2004 Jul 19
1
Channel banks, voicemail, and immediate=no
When using a channel bank for analog handsets, you have a couple options in
the way you handle transactions involving the analog handsets and origination.
With immediate set to no, it appears to me that soon as a digit is pressed
after going off-hook, the single digit is taken and processed against the
context that the channel is associated with from the configuration in
zapata.conf.
With
2005 Feb 27
1
DISA and a long delay; ideas?
Hi,
I have just setup a DISA setup whereby people can dial in, authenticate, are
given a dialtone and can then call out.
Everything works however there is a 10 second delay after the user enters
the number and presses #, until the system does anything.
Here is the relevant section from my extensions.conf:
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2006 May 04
0
disa and caller id
Before I go nuts trying to figure this out, is anyone using DISA in this
manner?
exten => s,1,DISA(XXXXX|context|callerid)
Everything works except the caller ID part. What I had wanted to do is to
setup up a file of authorization codes where each code was associated with a
context and caller id.
The format for the file, I thought would be:
XXXX|context|callerid
and I had it set up in
2008 Sep 17
0
How to remove dialtone from DISA?
Hi everybody,
Is there any way to remove dialtone from DISA? If yes, how to do it?
--
Zeeshan A Zakaria
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080917/e7e17a0d/attachment.htm
2006 Apr 18
0
Help Getting Local Exchange Dialtone on PRI
Hi there,
i have a Problem with dialtone and a TE401P Card. I swear I surfed
the wiki, the mailing list and google for 4 hours and did not find the
solution, can you help me ?
In Germany I have an E1-Line and an Alcatel 4200 PRO PBX.
Without using asterisk I dial the "0" on an Alcatel Phone and have
the local exchange dialtone, then I can dial. Most users do not dial
en block, they
2008 Sep 17
1
DTMF detection problem on DISA
Hi everybody,
I am having DTMF detection problem on DISA with my callback system. For many
users, it keeps playing the dialtone even after they have input their
number. I have trunk setup to both g729 and ulaw. What could be the reason
for this problem. Some users have to dial a few times before the system can
recognize their dialed number.
--
Zeeshan A Zakaria
-------------- next part