similar to: Passing Callerid

This is with an x100p (the motorola chipset) Two problems. Looks like CALLERIDNAME is being used uninitialized. On my other phones the callerid is fine and my buttset shows that the callerid passes the checksum. This is the relevant portion of extensions.conf exten => s,1,Answer exten => s,2,SetCallerID(H ${CALLERIDNAME} <${CALLERIDNUM}>) exten => s,2,Dial(${MGCP_ALL}) Here is

I'm having a problem with the callerID that the polycom IP600 phones are displaying. I would like to modify the CIDName and leave CIDNumber as exactly what the phone call came in as(provided they aren't hiding callerID). Most of the calls will be going to the queue, but a few will go directly to the SIP phones. I've done a various combinations of using SetCallerID(),

For outgoing calls made on our PRI circuit we are setting the Caller ID using the format Exten => _9XXXXXXX,1,SetCallerID(1601XXXXXXX) The monitor shows that the CallerID is being set to the specified number, but yet when the call is received on the user end the ID is always the base number of our DID. For example we have 8600-8650 as DID's but the callerid is always 8600 regardless of

Hello, Does anyone know how to set the outgoing CallerID properly when using Snom200/SIP/CAPI/BRI? Following doesn?t work: exten => _0.,1,SetCallerID,526910 exten => _0.,2,Dial,CAPI/526980:${EXTEN:1} Asterisk writes: *CLI> -- Executing SetCallerID("SIP/226-ada0", "526910") in new stack -- Executing Dial("SIP/226-ada0",

I have recently upgraded to 1.2.7.1 from 1.2.4. I can no longer use "sip show inuse". Below is the output... I know there are current calls: redhat*CLI> sip show inuse * User name In use Limit * Peer name In use Limit Does anyone have an idea why this isn't working? Thanks, bp

Hello, I have connected asterisk box with legacy PBX Alcatel OmniPCX 4400 (and also another * box connected to A4200). These PBXes have function to assign name to extensions and display it on phone. Asterisk box is connected via PRI with euroISDN signalling (also I have tried QSIG). Is it possible to set callerid with name and display it on alcatel digital phones? With command SetCALLERID

Hey all! I'm trying to figure out a way to manipulate a call's caller ID based off of the caller's caller ID. Basically, I've got a situation where anything that goes through an Nortel Opt11's IVR comes out with the caller ID 400 (the Opt11's IVR's ext). When the call goes out the trunk that the call is destined for, I'd like to grab the 400 caller ID and

Hi *, now for a long time i am trying to set the outgoing callerid, without luck. I am here in Germany, my asterisk has a pri interface connected to a PMX installed by Telekom. All telephone calls are preselected to EcoVoice. I am using asterisk 1.2.7.1, zaptel 1.2.5 and libpri 1.2.2. A week ago we tried with a device able to simulate a telephone system so send out a callerid, and that

Hello How do I fix this.... [IPComms-in] exten => ${IPCCIDN01},1,Noop(${DATETIME} ${CALLERID}) exten => ${IPCCIDN01},2,SetCallerID(${CALLERID}) exten => ${IPCCIDN02},1,Noop(${DATETIME} ${CALLERID}) exten => ${IPCCIDN02},2,SetCallerID(${CALLERID}) exten => ${IPCCIDN03},1,Noop(${DATETIME} ${CALLERID}) exten => ${IPCCIDN03},2,SetCallerID(${CALLERID}) exten =>

Requirements: 1. http://sourceforge.net/projects/odbcsock 2. The SQL server must be in the same subnet as your * server Howto: 1. Install ODBCSocketServer on your SQL server and verify connection with the included VB COM app from a Windows box. 2. Decide how you want to transform the Caller ID. In my case, I want to do a lookup of the CallerID number in SQL server and prepend the Caller ID

Is it possible to send the CallerId to IconnectHere with Asterisk when making outbound calls? I read somewhere that it doesn't work. I have set up everything to send the correct CallerId info to IconnectHere but I get a "442-887-926267" caller id. In [globals] ICONNECT1=1713...(my number) MYNAME=My Name I set up the Caller Id in the dialing macro: [macro-iconnecthere] exten =>

Hi, Has anybody managed to get callerid properly set on a call from local to asterisk SIP endpoint through h323-pstn gateway to a regular phone. I'm using ata186 as SIP endpoint. It has 12125551234 assigned to it. When I place a call to pstn I'm not receiving 12125551234 as the clid, but a number assigned to PRI channel by phone company. It worked with chan_oh323, but there were other

Until recently, I was using Broadvoice for my in/out calling thru Asterisk. I was extremely pleased to see that Broadvoice was actually passing the callerid info (number and text) that I had set up on each device in my SIP.CONF file. I had PSTN users tell me that they were actually seeing name and extension info when I called them from the Asterisk box. Last week, due to numerous user quality

Hi to all, I have a question about the callerid (msn number) off calls comming FROM a queue. This is my setup: - ISDN using zap (zaphfc) - Incomming calls arrive in a queue - One of the members of the queue is my cell phone... member => Zap/g1/XXX73XX19 (X to protect my privacy ;-)) The problem is the call from the queue to my cell phone. In a dailplan i can set the outgoing msn using

Hello all, Recently I purchased an QuadBRI card from junghanns.net after some playing around, reconfiguring dialplans etc with the exception of 1 thing everything seems to work: I seem to be unable to set the outbound callerid. The dutch telecom operator (KPN) provided me with 4 MSN's on 1 BRI interface. In the past years I'm more then used to setting the MSN without the leading 0, this

I can't get the callerid feature to work when being passed through iconnecthere. Is it even possible to specify your own callerid using iconnecthere? -sip.conf- ... [iconnect] type=peer username=xxxxxxxx password=xxxx callerid="Jerky McJerkface" <(555) 867 5309> host=213.137.73.178 -extensions.conf- .... exten=>_1NXXNXXXXXX,1,SetCallerId,4168675309

We have several customers we need to place outbound calls for (in a single system). May have to place calls for thousands of different caller ids. Customer signs a contract guaranteeing the caller id they provide is owned by them. I have everything setup for AMI Originate and can place the calls. However, I'm encountering a problem with the caller id. The system I'm dialing through

Hi, we are using asterisk with Junghanns QuadBri and some sip phones. 2 channels are configured in NT mode (ISDN PBX connected, internal ) and 2 channels are connected to the public ISDN network (bri-cpe). We use Bristuff 0.2.0 RC8C from Junghanns. When a call comes in from the public phone for a specific extension (Hotline Number), we initiate a parallelcall to some SIP phones and also to our

this happened to me on a cvs update, rebuilt a clean chan capi cm and all is well. Greg ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Voicomm User Sent: Monday, September 19, 2005 3:29 AM To: Armin Schindler Cc: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Asterisk ISDN: Problem

Greetings all.. We have an inbound/outbound PRI installed and terminated on a T400P ? Digium Quad T1 card. We?re seeing an odd problem when sending $CALLERIDNUM when calls from the PRI are forwarded back out to the PSTN over the PRI. The $CALLERIDNUM is not being sent out along with the call. It?s sending the phone number of the PRI itself, rather than the $CALLERIDNUM information. Yes, we can