similar to: USB to serial converters

doctordruidphd wrote: > I am trying to use software to program a scanner radio (BCD396t and UASD software). The software installs and seems to run properly, reading and writing database files. But I cannot connect to the scanner, through a USB-to-serial cable. > OS: ubuntu-8.10, kubuntu-8.10, debian/lenny (tried them all) > > lsusb identifies the cable as follows: > Bus 002 Device

Ubuntu creates /dev/ttyUSB0 for me when I plug in the usb-to-serial-adapter. I have a symbolic-link to /dev/ttyUSB0 from 'dosdevices/com1'. What is new in 10.04 Ubuntu is that I have to sudo chmod o+r and sudo chmod o+w on /dev/ttyUSB0 every time before I start the app which uses that serial line. ttyUSB0 goes away when I unplug the serial adapter from the USB port or shut down the

>> I setup apcsmart driver on port /dev/ttyUSB0 in ups.conf and check that runing user=root. >> > user=root is only for testing- this may cause other permissions problems later. It looks like the simplest way to handle this on Debian is to add the system 'nut' user to the 'dialout' group: $ sudo adduser nut dialout > I have been meaning to collect some

Hello, I have an application that sends data out to a serial port, then should receive the reply. After some hassles I got the application to enumerate the serials (in a dialog box where you select the port), and after creating the link in dosdevices (in lower case I should note, wine will not recognize COM1) it actually starts sending out data (verified using a terminal on the other end). But

I am trying to use software to program a scanner radio (BCD396t and UASD software). The software installs and seems to run properly, reading and writing database files. But I cannot connect to the scanner, through a USB-to-serial cable. OS: ubuntu-8.10, kubuntu-8.10, debian/lenny (tried them all) lsusb identifies the cable as follows: Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc.

I'm trying to work out how to set up a custom udev rule to override permissions on serial ports (/dev/ttyS* and /dev/ttyUSB*) on CentOS 5.3 The default rule, in /etc/udev/rules.d/50-udev.rules has the line: KERNEL=="tty[A-Z]*", NAME="%k", GROUP="uucp", MODE="0660" and I would like the mode to be 0666 Various docs on web say that you

10/10/2007 After consulting with some local Linux consultants, we have concluded that Corel Draw does not print under WINE because it detects the printer as Postscript, converts the file to Postscript, and sends the file to CUPS, which then converts the file to Postscript, again, and sends it to the printer which prints garbage. The consultant found a way to make a couple changes to WINE

On Feb 26, 2014, at 2:10 AM, Victor Romero wrote: > I got a UPS Sola Basic but it is not working, I'm providing the details. I hope that someone can help me to get it working. > > Please let me know if there is some other information that I should provide :) Thank you for providing all of this information! > OS name and version > Ubuntu 12.04 > $ uname -a > Linux

[please use the nut-upsuser@ address rather than nut-upsuser-owner@ and be sure to use Reply-All - thanks!] On Dec 23, 2014, at 1:52 PM, Janez Kremzer <janez256 at gmail.com> wrote: > Hi! > > I woud like to use Raspberry Pi with NUT installed whic coud shut down NAS in the office. > NAS doesn't have comport and this is the reasion why not to use NAS directly. > >

Hi Users NUT, I want monitor a UPS of brand SMS (Sinus Double 8 KVA) using a raspberry-pi. In compatibility list, is listed to use the blazer_ser driver. I use a USB adapter to RS-232 conected in to the No-Breake. Follow the comands e confs. root at rasp:/home/pi# lsusb *Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port* Bus 001 Device 003: ID 0424:ec00 Standard

Hello all and thanks. I read here <https://mn3m.info/posts/configure-ups-monitor-using-nut-on-debian/> while searching around for my issue's resolution. In this I see that this nut driver is creating and using an entry in /dev (in this case ttyS0). So I "ll tty*" and see nothing with nut. Since this is a USB UPS, I suppose I should be looking for something in /dev/ttyUSB*.

Followups set, hesitantly, to gmane.linux.redhat.fedora.general I thought I had posted this to both these groups, but my newsreader doesn't show it in either. I have three Garmin GPSs (an Etrex Vista and two Rino 120s), which I want to use under Fedora 11 Linux with four PCs, and two IBM- reconditioned Thinkpads, T30 & T42. Garmin software suites (Metroguide USA and Topo US 2008)

Hi Charles! Thanks a lot for your response. Now I figure why the isbmex driver was not working. On the other hand I've tried to run the command suggested. But no success. I got this information when running the dmesg command after running the modprobe $ sudo modprobe ftdi_sio vendor=0x0483 product=0x0035 [35816.111760] usbcore: registered new interface driver usbserial [35816.111792]

Wine does great job for GUI on screen (PC Oscilloscope) But, can't USB connect to external hardware device that has FTDI 245AM chip in it. See device in /dev/ttyUSB0. See device in lsusb, also in lsmod. Did normal linking, ln -s /dev/ttyUSB0 /.wine/dosdevices/com3. No luck. See the link with: ls -al of dosdevices. Using COM3 because in Windows registry in Wine, it says COMPORT=3 Any help?

Hello! I've ran into this annoying issue when setting up a new server. I have an APC SmartUPS hooked up on a USB-serial converter on /dev/ttyUSB0. This works nicely, until: hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling... pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 usb 3-1: pl2303 converter now attached to ttyUSB1 apcsmart gets into an infinite loop of this:

February 10, 2008 I am running Delorme Street Atlas USA 2006 Plus under 32 bit Kubuntu 7.10 using WINE 0.9.54. When Delorme starts as Windows NT 4.0, I get the following: fixme:spoolsv:serv_main (0 (nil)) err:advapi:service_get_status service protocol error - failed to write pipe! err:winedevice:ServiceMain driver L"VICHW11" failed to load err:advapi:service_get_status service

Any chance USB will ever be supported?

I have asked this before, but has anyone successfully used serial port /dev/ttyS0 under wine? I am trying to run a windows program for controlling an amateur radio - a 'tentec pegasus'. My linux is a debian derivative ... sidux ... and I have installed wine from the sid repositories. The program runs ... and displays a radio dial which looks correct. However, because I cannot

Hi All I am connecting a ups via a usb to serial converter. Works fine, however when the converter is unplugged and plugged back in, udev creates another device e.g instead of ttyUSB0 it creates ttyUSB1. Here is the udev rule that I added to the top of the 025_nut-usbups.rules file in order to create a static symlink should udev decide to create the device as either ttyUSB0 or ttyUSB1.

Hello, everyone - I have an old Windows app - a ship navigation program - that needs to see GPS input on a serial port (it was written in the pre-USB days.) My laptop, however, has no serial ports - but this same program, when run on a friend's Windows box, can read the GPS info from the USB-connected GPS via the "USB-Serial Driver". This is one of the frustrating bits of this