similar to: Grandstream GXP-2000 call end

Hi, I have Grandstream GXP-2000 connected to Asterisk, and Asterisk has trunk to VSP for PSTN calls. When ever I place local PSTN call, the landline doesn't hang up right away (40 sec), when I hang up the GXP-2000. The GXP-2000 seems to have problems making international calls as well. Where it hangs up soon as the other party picks up. I have used different IP phones, VSP's and etc.

I started out a few years ago with some SPA-841 sets, because the Grandstream 2000 I thought I wanted was perpetually delayed. The GS had more call appearances, and I didn't want just the 4 max that the SPA offered. As it turns out, with the greater flexibility of VOIP, I don't need 'dedicated' CAs the way I needed them on ISDN previously, so 4 is actually adequate. Along the line,

Hi People, We use the Grandstream GXP-2000 phones, firmware 1.1.1.14, Asterisk PBX, Slackware Linux 10.2, loaded on a Intel(R) Pentium(R) 4 CPU 2.66GHz Box... The issues that we are experiencing involves our Telephone Operator's/Receptionist whom answer multiple incoming calls... As an example.., when they answer line 1 and Line 2 starts to ring they would ask the person on line 1 to

Hello I'm about to order a GrandStream GXP-2000 and a Linksys SPA-921 I'd like to have some user feedback about how those phones perform, and whether their LCD screen displays both the caller ID name and number (The GrandStream BT-100 only displays numbers, which isn't very helpful). Thank you.

Hi all What headset do people use with the GXP-2000? Any recommondations for or against particular models? Thanks Peter -- Peter Bowyer Email: peter@bowyer.org Tel: +44 1296 768003 VoIP: sip:peter@bowyer.org

Hi, I looked at the docs and probably missed it: is there a way to set a dialplan on the GXP-2000? (to avoid having to press "Send") Thanks, -- "Computers are useless. They can only give answers." - Pablo Picasso

Hi folks, Just a quick question. Does the GrandStream GXP-2000 phone support presence (hints)? Cheers, Richard. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060109/26c4a63c/attachment.htm

I have upgraded the GXP-2000 to the newest firmware 1.0.1.12<http://1.0.1.12>and the phone is much more usable However, I still have two slight sound quality issues: 1) There is static on the line at all times. It is not that noticable to me, but when I make calls out the PSTN the person on the other end hears it. If I use a Cisco ATA with an analog phone and call the same person again

Hi, I'd set the daylight saving option to yes on all the GXP-2000 phones, but apparantly it doesn't move it an hour back on last sunday of October. So now I am stuck will all the phones showing the wrong time. Isn't there an option so that it'll automatically update daylight savings? Thanks -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was

I had provisioning via tftp working on this phone. I have verified that after the firmware upgrade, it contacts the tftp server and downloads the cfgMACADDR file, and the ring/etc files successfully. Unfortunately, changes made to the config file don't make it to the phone (SIP account info/server info, etc). The script that I am using to generate the binary files is loosely based on

FYI, spoke with Grandstream this morning, the GXP-2000 release has been delayed again. Looking like April now before these hit the street. -- Cory Andrews Senior Partner VOIPSupply.com +++++++++++++ V: 800.398.VOIP X22 F: 716.630.1548 E: Cory@VOIPSupply.com

I have 5 GXP 2000's with firmware 1.1.4.25 running with Asterisk 1.4.13. Is anyone else getting the following error in the asterisk console: [Oct 22 11:39:01] WARNING[7100]: rtp.c:1142 ast_rtp_read: RTP Read too short every couple of seconds when a handset is in a call? I didn't notice this happening when I was using an older GXP2000 with the same firmware (doesn't mean that it

Can anyone here have experience using G.722 on the Grandstream GXP-1200? It's supposed to support the codec, but I wonder if the handset does it justice? The older BT-200 also supported the codec, but the handset was not good enough. You could only hear the improved call quality using a headset. Michael Graves mgraves <at> mstvp.com o(713) 861-4005 c(713) 201-1262 sip:mjgraves at

On my Grandstream GXP 2010 I have the possibility for 6 channels and thus 6 different accounts... Line 1 I define an account that registers directly to an online Asterisk-server, somewhere in a datacentre. Line 2 I define an account that registers to the local Asterisk-server (NSLU2 unslung) When I activate both accounts, only the first account (to the Asterisk-server on the internet) registers.

Is anyone else having an issue with GXP-2000s and transmit gain? All my other phones are fine on my TDM400P with txgain set at 0, but the GXP-2000 caps at about a third of the scale in ztmonitor. I'm getting people complaining they can't hear me on my GXP-2000s, whereas my Snom 320 and Polycom 301 are great, and my Budgetones are overmodulating. Is there any conceivable fix on the

I occasionally have to remotely configure and reboot customers' grandstream phones. I use tftp, so make changes in the tftp config files, but then need the customers manually reboot the phones. How can I reboot the phones myself remotely. -- Zeeshan -------------- next part -------------- An HTML attachment was scrubbed... URL:

All: I am using the standard voicemail in asterisk. Everything works well, except, if a users wants to record their own personal greeting, it doesn't playback. I can see the soundfile being created. I suspect it is a setting in the voicemail.conf, or an option I am over-looking on the grandstream, but if anyone can point me in the write direction, I would certainly appreciate the help.

So I've got phones with ancient firmware, and the release notes for 1.1.1.14 say " read the previous release notes and first upgrade to 1.1.0.16" The 1.1.0.16 firmware is not available for download from the grandstream website (at least I haven't found it). Any pointers on where to get this intermediate image? I already tried googling to no avail (didn't help that I was

I have a client with 20 GXP-2000s. Everything seems to be working fine. However, after a couple of weeks of use, the client is having a hard time adjusting to the new IP based phone systems and only misses one feature from their old Lucent system. That is, they had 8 analog lines before and all their old Lucent phones showed a button for each line. So, it was easy for anyone to say,

I've finally got a chance to play with 1.0.1.9, and the wiki has been updated. At the moment, I don't know of _any_ bugs with it. I'm yet to play with complex things like early dial, and will update the wiki as I find information. http://aussievoip.com.au/wiki-GXP-2000 I've just been given official permission to offer the firmware as a download, so if you visit