Displaying 20 results from an estimated 500 matches similar to: "two box share one real time configuration database."
2004 Jun 27
1
Confused with CallerID when using the iax chanenls
Hi,
I have two * box. One is box1 and the other is box2. And I have two iax
clients A and B. A is registed with box1 and B is registed with box2. If I
make a call from A to B using the following method:
IAX/[<user>[:<secret>]@]<peer>[:<portno>][/<exten>[@<context>][/<options>]]
The CalledID that B got is <user> but not A's CallerID. I
2006 Apr 20
0
Fwd: why DUNDi ${IPADDR} has been transfered to 127.0.0.1?
---------- Forwarded message ----------
From: ?? <jeffery9@gmail.com>
Date: Apr 20, 2006 5:39 PM
Subject: why DUNDi ${IPADDR} can not transfer to 127.0.0.1?
To: Asterisk Users Mailing List - Non-Commercial Discussion <
asterisk-users@lists.digium.com>
in the documents, it said that....
; 'dest' is the destination to supply for reaching that number. The
; following variables
2003 Dec 18
2
IAX quesitons please.
Hello,everyone,
I encoutered some difficult with IAX when I run the asterisk.
<---->internet <--> asterisk + NAT <--> DIAX
my * box and NAT are at the same linux box which connecting to the internet using ADSL. The box has two network cards and two IP address,such as
public IP:211.11.11.11
private IP:192.168.1.10
the windows box running DIAX lies behind the
2011 Oct 05
3
Terrible FPS on Lord of the Rings Online (LOTRO)
Hey all I've been trying to get some good FPS on this game and I can't seem to get it work decently at all. According to the AppDB for LOTRO a lot of people seem to be able to push out 80-150fps on this game. I don't know how as I've scoured the internet and have tried every possible registry tweak you can imagine. I even tried niceing the process to see if it would make a
2013 May 01
0
Re: Error testing deploying Grizzly
I believe the error indicates that hiera was installed as a rubygem which
is not supported on Puppet 3.x. Maybe the error will go away if you remove
the hiera gems?
I think I have gotten around it by adding ''require rubygems'' to the puppet
executable.
I''m copying the puppet-users mailing list b/c I am guessing this is a
common problem.
On Wed, May 1, 2013 at 12:35
2006 May 28
3
doubts about asterisk configuration from database
hi,
I want to complete asterisk configuration from database(MYSQL),now I come across some doubts:
1. http://voip-info.org/tiki-pagehistory.php?page=Asterisk+configuration+from+database&diff2=3
says that "Dynamic 'friends' (Asterisk v1.0.*) and the number of options supported by this 'MySQL_Friends' system is currently very limited",at the same time I find
2006 Dec 04
2
ASterisk and SER
HI,
My Asterisk is registed with my SER. My client are connected to asterisk
when they dial any no like 62222 asterisk passes this is ser and then again
ser passes this no 2222 (strip 1) back to my asterisk. but insted of ringing
this exten it says loop detected. can some one tell me what is wrong.
thanks
arun
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2006 Nov 07
0
failed to authenticate on invite
I have 2 asterisk boxes connected via SIP
box 1 sip peer connected to box 2 (ip addresses intentionally removed)
[ast20]
type=friend
host=x.x.x.20
insecure=very
context=subscriber
dtmfmode=inband
qualify=no
canreinvite=no
disallow=all
allow=ulaw
box 2 sip peer connected to box 1
[sbb19]
type=friend
host=64.1.8.19
insecure=very
context=inbound
dtmfmode=inband
2016 May 10
2
How to register a pass as being optional?
I've created a post-RA pass runOnMachineFunction that gets registed with
the pass manager like this:
static RegisterPass<RegBankFixUpPass> X("regbankfixup", "Register Bank
Conflict FixUp Pass");
And and whenever I run clang or llc now the pass runs. Initially, until I'm
sure this pass doesn't break things I'd like it to be opt-in - ie I'd like
to
2006 May 16
2
Multiple Registers
List,
Does anyone know how to limit the amount of registrations that a sip user
can have?
For example, I have 2 softphones that I use on my laptop & desktop, both use
the same username & password. If I have both softphones up at the same time,
I can make simultaneous calls with each of them.
I know you can have call-limit=1 but in this case, I want to allow them to
have 3 way calling
2006 Apr 20
0
why DUNDi ${IPADDR} can not transfer to 127.0.0.1?
in the documents, it said that....
; 'dest' is the destination to supply for reaching that number. The
; following variables can be used in the destination string and will
; be automatically substituted:
; ${NUMBER}: The number being requested
; ${IPADDR}: The IP address to connect to
; ${SECRET}: The current rotating secret key to be used
....................
but in my experiences.. i
2006 Feb 03
2
can asterisk to say chinese like say english
this is not just playback recorded voice. this is let asterisk say chinese.
how to do this.
there have any ideas?
--
Jeffery
iaxtel Num: 1-700-576-1311
fwdnet Num: 728150
2006 May 30
2
problem about asterisk realtime.
hi,
Longing for your help.
I came into a problem ,Now I want to configure asterisk sip
peers from MYSQL database dynamic, flolling the introduction of asterisk
realtime,i set the cofiguration of sip users,but I need to cofigure sip
peers too.
Where I can find some infomation about cofiguring sip peers?
What is the difference of configuration sip peers and configuration sip
2015 Oct 06
3
gpo failure
Am 06.10.2015 um 21:26 schrieb mourik jan c heupink:
> I have checked all our policy directories on sysvol, and I have a
> "Registery.pol" only in some "/Machine" directories, and none in "/User"
> or "/Group Policy".
Do you have any policy in the User tree in the GPME in that GPO? If you
never defined one, then the file is missing. Try e. g.
2002 Aug 30
1
rsync: connection unexpectedly closed; reverse lookups?
Hi.
My goal is to use rsync to syncronize box1 and box2. On box2, I have a
tapedrive which I write the data I syncronize from box1 every night.
On box1, my /etc/rsyncd.conf looks like this:
root@box1# cat /etc/rsyncd.conf
max connections = 1
syslog facility = local6
[tmp]
path = /tmp
read only = yes
comment = export of /tmp
hosts allow = box2
auth users
2009 Jul 14
1
--delete not working (minimal example)
--delete option is not working for me. The following is a minimal example.
$ mkdir box1 box2
$ touch box1/letter box2/extra
$ rsync -a -vv box1/ box2/
sending incremental file list
delta-transmission disabled for local transfer or --whole-file
letter
total: matches=0 hash_hits=0 false_alarms=0 data=0
sent 92 bytes received 34 bytes 252.00 bytes/sec
total size is 0 speedup is 0.00
$ tree
2017 May 24
0
How to improve/resolve the Flushing xxx bytes to node would block?
Hi, Guus
I encounter the below log messages that after tinc run for a while, it seems box1 begin to buffer traffic to abc, and box1 is behind a firewall to connect abc from firewall’s inside to outside, and abc is on the public internet.
Normally the major traffic is actually from abc to box(download direction), but not sure how this happens, and could you suggest something we can avoid this to
2008 May 10
1
scp local/remote external calls
I'm a bit confused how scp works... could someone please explain the
local/remote external calls that happen when scp is started... in
particular how it relates to ssh on the remote site?
To be more specific...
I use Kerberos for authentication and I've been working on an ssh wrapper
script that checks my Kerberos credentials before running the ssh command.
If the credentials are
2006 Oct 09
1
patch: mailboxcasecmp()
Here is a patch which adds mailboxcmp() and mailboxcasecmp() functions,
similar to mailbox_equals(). Names were chosen to match strcmp() and
strcasecmp(). I needed this for Johaness Berg's dspam plugin. It
watches a folder "SPAM" and forcing this to be uppercase is unacceptable
for me. (I also had to modify the plugin to use the new routine.)
It's against dovecot-1.0.beta8
2013 May 28
1
Perfect LDAP tree
Hello everybody and Timo.
I have the next problem.
With LDAP tree like
ou=mail
|
- dc=example1.com,ou=Mail
|
- mail=box1 at example1.com,dc=example1.com,ou=Mail
|
- mail=box2 at example1.com,dc=example1.com,ou=Mail
?
|
- dc=example2.com,ou=Mail
|
- mail=box1 at example2.com,dc=example2.com,ou=Mail
|
- mail=box2 at example2.com,dc=example2.com,ou=Mail
?
and settings in dovecot