similar to: E1 testing

Hi, FreeBSD 5.4, NUT from ports (2.0.3), serial on /dev/cuaa1, Ellipse 1200 USBS. I set the ups.conf up as : [ellipse] driver=mge-utalk port=/dev/cuaa1 desc="Ellipse" When I go to start it I get : Network UPS Tools - UPS driver controller 2.0.3 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.87 (2.0.3) Could not get multiplier table: using raw

changing i386 COMMAND_LINE_SIZE to 1024 attached is a simplistic fix to change kernel's command-line size from 256 to 1024, tomatch capability in syslinux 3.08. It seems to work. Is this all there is to it ? One of the reasons I did this was to figure out what extra options are appearing, and why. b4 extending: (the last bit is truncated) Jun 4 06:31:05 truck kernel: Kernel command

Hi, I'm running into an issue while using FreeBSD 5.4, NUT from ports (2.0.3), serial on /dev/cuaa1, Ellipse 1200 USBS. The ups.conf is : [ellipse] driver=mge-utalk port=/dev/cuaa1 desc="Telecom Closet Ellipse" When I go to start it I get : Network UPS Tools - UPS driver controller 2.0.3 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.87 (2.0.3)

folks, Im trying to boot to runlevel 4 explicitly, using this stanza: ie with a single 4 at end of APPEND line. LABEL 2.6.11-r10c2-soekris-v1 MENU LABEL ^j. runlevel 4 2.6.11-r10c2-soekris-v1 # 4 MENU DEFAULT KERNEL vmlinuz-2.6.11-r10c2-soekris-v1 APPEND console=ttyS0,19200n81 root=/dev/nfs nfsroot=192.168.42.1:/nfshost/foo

Hi All, I have a Soekris 4801 running Asterisk and I tried to add a X100P FXO card only to find that the Soekris will not boot with the card installed. The LEDs flash for a second and then nothing, it does not boot. I've tried 2 different X100p cards, both of which work in a regular desktop system, and still have no luck. I tried a different Soekris 4801 with no luck. I've also tried a

I'm trying to build nanobsd. I get the error below. Any ideas? ------------------------------------------------------------- >>> stage 4.2: building libraries -------------------------------------------------------------- cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj/nanobsd.soekris/ MACHINE_ARCH=i386 MACHINE=i386 CPUTYPE=

I'm very happy to announce the first stable version of my little creation: Miruna Asterisk System. This version run only on Soekris 4801 board, but I think if we change kernel run on other boards:) You can download it at: http://sourceforge.net/projects/miruna-asterisk/ In next days I'll setup a wiki and a forum to help/documentation/bugs. Sorry for horrible doc (now), I'm writing

1. \ at end of lines (in pxelinux.cfg/default, etc) causing/allowing line-wrap ? for those of us who prefer 80 column screens, and 1 item per line. 2. label-specific APPEND adds onto global APPEND ( currently replaces it IIUC ) maybe this needs a separate keyword ADDAPPEND (255 char limit still applies im sure) 3. strip trailing # comments ( I havent verified that it

On 06/10/2014 11:41 AM, Thomas Quinot wrote: > Dear all, > > I'm trying to boot a recent PXELINUX on a brand new Soekris net4501 > (comBIOS 1.33). This combination appears to not work out of the box... > > I see much advice floating around from a few years ago, hinting that > earlier versions of PXELINUX might have worked. However before resorting > to archaeology

Hi group, i'm brand new and i would like to ask about soekris hardware. I read along the web but i have some doubts that i think can be solved here. My question are the following: 1) does the Digium TDM400P fit in the soekris box with a 4801 SBC or a bigger box is needed? Any suggestions about where to pick up another box? 2) does the Digium TDM100P (already discontinued) fits fine in a

folks, Im finding that using a config like this: SERIAL 0 19200 #IPAPPEND 2 PROMPT 1 TIMEOUT 100 IMPLICIT 0 APPEND console=ttyS0,19200n81 root=/dev/nfs nfsaddrs=10.10.10.100:10.10.10.2:10.10.10.2:255.255.255.0:soekris:eth0 nfsroot=10.10.10.2:/nfshost/truck panic=15 LABEL deb268 KERNEL vmlinuz-2.6.8-1-386 initrd=initrd.img-2.6.8-1-386 panic=10 LABEL deb268-ram KERNEL vmlinuz-2.6.8-1-386

Im trying to boot memtest86 via pxelinux, memdisk, I found this advice on http://forum.x86-secret.com/viewtopic.php?t=2906 folks are making the image match a floppy size by one of the following: dd if=memtest86+-1.xx.bin of=memtest.img bs=360k count=1 conv=sync or dd bs=360k count=1 conv=sync if=memtest86+-1.xx.bin|gzip > memtest.gz I did the former, it did suppress the warning/errors I saw

I try to use a linux on a soekris : http://www.soekris.com/net4801.htm . This is a tiny PC without screen nor keyboard. So i can use only a RS232 console. I can find some information on the use of lilo on this card with success (a modified debian). I have choose to use a mandrake then the mklivecd script to transforme it in .iso file (wich make it read only). I have create my own script to

Dear all, I'm trying to boot a recent PXELINUX on a brand new Soekris net4501 (comBIOS 1.33). This combination appears to not work out of the box... I see much advice floating around from a few years ago, hinting that earlier versions of PXELINUX might have worked. However before resorting to archaeology I'd be interested in feedback from others who might have got through this. I

I'm working with a Soekris net45xx SBC and I'm experiencing problems using any syslinux code (syslinux, pxelinux, extlinux) above version 2.20. I'm interfacing with the Soekris via the serial console port, which is the primary bios console. I've tried different configurations with setting serial in the config file, but no change (though I dont even thing it's getting to reading

Hello - I've been running Asterisk (quite happily!) for several years now using a Digium TDM400P card in an old Linux box (P4 1.6 w/ 256MB RAM). I'm also running another old PC running m0n0wall as a firewall. Between these two boxes, that run 24x7, I'm drawing a lot more power than needed and hoping to make a dent in my monthly electric bill by consolidating the two into a single box

I recently installed the April 21st snapshot on my Soekris net4801 (dmesg here[1]) that has a vpn1411 crypto-accelerator in it. For the first time, I'm getting a tremendous amount of "Corrupted MAC on input" errors while sshing into this machine. While there has been discussion -- going all the way back to 3.5 -- that it's a hardware problem with the net4801 and the

On Apr 6, 2015, at 8:46 AM, Richard Flint <richard.flint at gmail.com> wrote: > Unfortunately this approach isn't going to work. > > I've done some further research and it would appear that it is the underlying ugen device and not libusb that is failing to honor the timeout. > > https://mail-index.netbsd.org/tech-misc/2006/03/17/0000.html > > The person above

Bob, Have you looked at any of the products by Zyxel? With QOS, VPN & wireless support they have: For ADSL: Prestige 652HW Firewall/Router: Zywall 10W & 30W I'll be honest, I havn't used any of these yet. We were looking for similar products to suuport our VOIP installs. We just ordered some demo units from Zyxel, we shoul have them later this week. I'll let you know

Im trying to get 2.6.17-rc4-mm1 (which includes klibc) working on an nfs-root setup. Its not working, so I started adding printf()s (not printk()s !) 1st thing I notice is arg5 is empty, but arg 6 is real I could imagine this unexpected situation confusing kinit (will check..) Or is that empty arg intentional, so that it marks the beginning of pxelinux addons ? kinit:main: init-arg 0: /init