similar to: ANI and DNIS Seperation on a PRI(TelephonyNumbering Plan (E.164/E.163) (1)'*4105556654*8005550215*' ])

Yes its a T3 split into seven trunk groups with one D channel and NFAS on each. Can you explain the cut function or point me somewhere please? Thanks, Steve -----Original Message----- From: Alexander Lopez [mailto:Alex.Lopez@OpSys.com] Sent: Mon 4/10/2006 12:51 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Subject: RE: [Asterisk-Users] ANI and DNIS Seperation on

OK I am going to do it again. Global Crossing is now sending ANI but it is not in the format I expected. Any one know of a way to get this data into two seperate variables? The first number is ANI and the second is DNIS so it is "*tendigits*tendigits* on one line like below. < Called Number (len=26) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan

Can someone in Asterisk'land subscribing to 800 service explain to me how to setup extension.conf to route calls based on the incoming DNIS/ANI. For example I want to route 3 incoming 800# coming across a trunk group to all land in the same queue. So I guess I am asking how to perform DNIS/ANI based call routing? -------------- next part -------------- An HTML attachment was scrubbed... URL:

does anyone know how to route a call coming in with ANI*DNIS* Oct 31 12:47:41 VERBOSE[30056] logger.c: -- Executing Set("Zap/49-1", "DID=1231234*4812*") in new stack I tried making a route for _.*4812* but that matched everything rather then just the dnis i wanted.. any ideas? I would preferably like pass the callerid along to my extensions, but for now the important

Hello, Being totally fed up with the lack of quality and reliability from both VoicePulse and BroadVoice, We are switching to a direct IP connection to Global Crossing. We've installed a local point-to-point T1 into their CO, and they will give/take SIP g729a directly and act as the gateway for us. In setting up the inbound SIP service, they are asking the question, "In what format do

Good Day list, Need assistance determining the best place to read up on whether Asterisk can help me out. I have a situation where I need to do the following <PRI from Telco> ------- <Analog Channel Bank>------------<Proprietary Box> | | | | | | <PRI Port 1 of Digium Quad T1> <PRI Port 2 of Digium Quad T1> | | | | | |

http://bugzilla.mindrot.org/show_bug.cgi?id=521 Summary: PAM authentication not working in privilege seperation mode running in trusted system on hp-ux Product: Portable OpenSSH Version: 3.5p1 Platform: HPPA OS/Version: HP-UX Status: NEW Severity: major Priority: P2 Component: sshd

Hi i have an asterisk pbx with E1 port connected to another PBX. Im trying to send the DNID/DNIS to the PBX here's my dialplan exten => 8881111111,1,Dial(ZAP/g2) exten => 8881111111,n,Hangup() The PBX just get the number 2 as it's DNIS when i change it to ZAP/1 or ZAP/g1 the PBX get the number 1. What should i add to send the extension number as DNID/DNIS? Thanks! --------------

I installed a Sangoma card with the default install. I'm getting five digits of DNIS with each call. The T1 is setup ESF/B8ZS wink start. Each of the digits of the DNIS are being used for extensions in the context. I need a single extension that let me start an AGI script that can use the dnis. Can anyone point me in the right direction to do this? Thanks, David Ruggles CCNA MCSE (NT) CNA

Is there a reason the variable ${DNIS} does not get set with incoming calls via chan_capi ? Is it related to the MSN=X in capi.conf ? version = chan_capi-cm-0.6.3 example; exten => _95555555XX,1,NoOp, ${EXTEN}, ${DNIS} == ISDN1: Incoming call '0400000000' -> '95555555' -- Executing SetCDRUserField("CAPI/ISDN1/955555 55-135", "Incoming") in new

The subject pretty much says it all. Does Asterisk support DNIS, and if so, what kind of connection is required? (T1, PRI) I've got a wink start T1. I've read comments that say the DNIS will be seen as an extension, but I'm seeing each digit of the DNIS as a separate extension. So in my case I send DNIS of 12345, Asterisk will jump from extension 1 to extension 2 to extension 3 to

Hi, Is it to possible to route incomming call using dnis information to specific extension or section in the extensions.conf ?? like my users dial my asterisk box using different toll free numbers, but i can't offer them unique services. Plz suggest that if it is possible ? if possible then any example ... Regards Apna --------------------------------- Do you Yahoo!? The New Yahoo!

Hello everyone, Our company has an Asterisk server where one of the T1s is connected to an IVR. Asterisk is configured for FXO Loopstart, and the IVR is configured FXS. We can call into it, but our software doesn't expect DNIS digits on FXS, and the digits are being interpreted as user input. We can certainly change our software accordingly, but our test bed also includes other

Not sure if this is off topic but I installed freeradius with yum on centos 5 and I'm hoping someone has some advice on getting DNIS proxy working In the acct_users file I have DEFAULT Called-Station-Id == "5500", Proxy-To-Realm := "xxx" Fall-Through = yes In the proxy file I have realm xxx { type = radius authhost = xxxx:1645

I am trying to receive both CID and DNIS from the telco through a non-pri T1. Currently I have the T1 setup and operational both outbound and inbound calls are completed as should be expected. The calls came in and were placed in the context specified in zapata.conf on exten => s,1. I have requested that the telco provide callerid (they call it ANI) along with 10 digit dnis for my 800

I've got an E&M wink T1 into a Sangoma card, and it's dropping my DNIS digits. I'm supposed to get four digits from the CO, and I reliably get the first digit -- it's a crapshoot as to how many after the first I get. I have overlapdial=yes and immediate=no. Any other suggestions of things to tweak/try? Thanks! -Ken

On Tue, 2003-12-23 at 19:22, Brian West wrote: > I'm just double checking.. I was told it wasn't possible but i'm going to > ask just in case. > > Can you set outbound callerid on a channelized T1? > >I think there is a way to do something like DID with the 4 digits of >DTMF passed before the call. It is unlikely though that you will find >someone interested

I receive calls over a T1 with callerid and then *ani*dnis*. I am able to strip out the ani and the dnis in the dialplan but when I try to set the caller ID to be the ani, it looks ok but then if I do a NoOp callerid on the next line, I get unknown. Here is the section of my dialplan: exten => _*NXXNXXXXXX*NXXNXXXXXX*,1,Set(ANI=${EXTEN}) exten =>

> Post your extensions.conf and what's on the CLI (asterisk -r) As requested: # cat /etc/asterisk/extensions.conf [incoming] exten => s,1,Answer() exten => s,n,NoOp(CallerID is ${CALLERID}) exten => s,n,NoOp(DID is ${DNID}) exten => s,n,Background(enter-ext-of-person) exten => 1625,1,Playback(digits/1) exten => 1625,n,Goto(digits/1) exten => i,1,NoOp(CallerID is

Wondering --- I know theo sent out a message asking vendors to get off their butts to get privlege seperation working, so what I'm wondering is whether this is happening/working/etc with Solaris? (specifically 8)...I know this is a portability question, since Sun doesn't support SSH on solaris 8. not on the list, so please CC me. thanks. adam