similar to: PRI Group Calling

Hello, I've been trying to get the smbclient -M to work but I'm running into some troubles. I want from a Linux box to display one of those popups, I can get a few command to work fine which is where my issue is: The windows machine I'm trying to send it to is 10.10.10.168 (or ENGS1004 NetBIOS name). When I do: smbclient -U fling%password -L ENGS1004.switchnet.nv

Following the successful deployment of asterisk servers at several of our branch offices, in the near future, I'll likely be implmenting an asterisk server at our HQ. We currently have a T1 PRI terminated on a legacy PBX. I'll be doing a stepped deployment in which, via a dual T1 linecard, the asterisk server will initially pass all incoming/outgoing calls directly through to the PBX.

SYNOPSIS Erratic red alarm T1 PRI on asterisk, but zttool running concurrently during alarm shows no errors, irq misses, or alarms, on any span. Using asterisk and quad Digium T405P, configured as follows: Span 1 connects to ISDN PRI (fractional 8 B channels, D channel 24). Span 2 connects to T1 Mux and analog stations. Span 3 connects to ISDN PRI Nortel BCM hybrid key system digital trunk.

Hello, I have a crossover PRI(Asterisk server to PBX) and a regular telco PRI T1 line and currently have echocancel=yes and echocancelwhenbridged=yes on those spans in zapata.conf. I was discussing CPU load with another Asterisk user and he mentioned that PRIs don't need echo cancelation and that turning it off will reduced CPU load on the server. I checked many sample configs and the

Hi, I would like to know if there is a way to detect the status of a span prior of sendig a call across it from the dialplan. I was asked to set up an * server with 2 spans connected to the telco and use the second as failover for the first. I checked that dialing a failed span (for instance: cable disconnected or no line) results in "congestion" for ${DIALSTATUS}, but message is too

Hello all. I have an NEC PBX connected via a TE210p E1 line to an asterisk 1.6 box. NEC -> E1 -> TE210P:1 -> * -> TE210P:2 -> E1 -> Telco Incomming calls from the telco to the asterisk box to the NEC work fine with indials and everything. Works sweet. Outbound from the NEC to the Asterisk box fail. Giving an long dial tone that then times out. Ie, pick up NEC handset, dial

I am trying to connect two machines to each other with an T1 crossover cable. The first machine has two TE120P cards - one connecting to the telco on an ISDN PRI. The second to a crossover T1 cable to a second machine which has one TE120P card. Telco <-cA-> Machine1 <-cB-> Machine2 Machine1: Two TE120P cards Machine2: One TE120P card cA: Standard T1 Cable cB: Crossover T1

Hi, I have an asterisk box with a TE410P (quad pri) which has 3 spans in use, 1 and 3 to two different telcos, span 2 to a legacy Norstar MICS. Everything has been working fine for months, but early this morning, the 1st span stopped accepting incoming calls, but outgoing calls on this span still worked. Nothing in the logs indicates a change overnight, span reset, or anything else obvious, excep

hi, i'm having problems getting asterisk spliced between an E1 PRI (german Telco Arcor) and an Ericsson Business Phone 250 digital PBX. The Asterisk Server has a TE405P with it's port 1 connected to the E1 PRI provided by our telecommunications provider Arcor and port 2 connected to the E1 PRI of our Ericsson BP250. the setup before: Arcor TelCo PRI(E1)

Was'nt sure if this mail got through earlier: I have been having a weird issue with my telco's ISDN PRI occasionally resetting on a incoming call, i suspect it to possibly be a timing issue since some of the incoming call work. This problem happens very frequently. I am using asterisk-1.6.0.1 with libpri-1.4.9, the asterisk server is connected viw TDMoE to a Redfone Fonebridge into

I have a 2 port T1 card doing PRI passthrough, Span 1 answers from Telco, Span 2 sends to my existing phone system(Nortel). My Span1 gets sent to the context from-pri, detailed here: [from-pri] exten => _49XX,1,Set(CALLERID(all)=${CALLERID(all)}) exten => _49XX,2,Dial(Zap/g2/${EXTEN},,twk) exten => _49XX,3,Congestion() exten => _49XX,4,Set(CALLERID(all)="") exten =>

Hi I have a system (S) that has a PSTN gateway to accept incoming calls and setup outgoing calls from/to Telco network. In the other hand I have a distant Asterisk box (A) that I would like to connect to (S) using the PRI interface. I understand that the proper way is to order to my Telco two PRI lines one for (S) and another for (A), and configure (S) and (A) to call each other numbers when

Hi, probably this is realy simple, but for some reason i don''t see it. probably i still don''t think object orriented :) lets say i have a piece of code which generates an array based on a few inputs. within a controller i want to use this code to generate three arrays, all based on different input variables how do i do that? can i call another method within a method? if so,

Steve Casto escribi?: >/ I am trying to retrieve the cause code of a outgoing call over a PRI />/ where the number called is out of service. When an out service number is />/ called I get a recording that the number dialed is not a working />/ number. I see cause code 1 in in the CLI as soon as the call is dialed />/ the Telco recording goes on for 30 sec. then hangs up. Any

I have a system with two 4 port T1 cards, with 5 PRI's configured. Each PRI is configured as an individual PRI and belongs to it's own group (groups 1-5) This system is handling roll-over from another system, where any error in processing the call on that system results in it being sent here. This mainly results in all calls resulting in a busy being sent for retry here. I then

UPDATE. The circuit has run clean since the 7th. It seems the telco found a problem after all but they can't tell me what they did... cause they think it was fixed as part of another case. Grrr. Well, I never doubted the T400P too much but I went ahead and bought a different card just in case. Haven't had to use it so far. One of the biggest reasons I did not think the Wildcard was at

Hello List! We have problems setting the right caller id on outgoing calls. The Asterisk Pbx is located in Bucarest(Romania), our Telco provider is rcs-rds.ro. We have the local telefon number 40787 00-99, associated to our PRI E1 Line. Where 00-99 are the DID numbers available. The telco is aspecting a 3 digit long Callerid from us, for example like "710", for the extension 10.

Hi everybody We have a strange problem with several asterisk servers (Version 1.4.11) using PRI cards (tied to telco here in Belgium). Indeed we noticed that whenever a local user places an outgoing call through the PRI (and telco) to another IPBX (tied to telco using BRI or PRI), if the remote party places the call on hold, the caller hears the _local_ music on hold instead of the

I have been getting quite a bit of PRI Resets using my Quad PRI Digium card. Prior to the resets I am getting similar notices to the following chan_zap.c:7482 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 3 Telco claims the PRI's are fine on their end and that it is my unit. Is this timing? (google somewhat leads to this) I am running 1.08 asterisk zaptel

hello list, i have a problem regarding the synchronisity (clock source) when using multiple cards. e.g. when having connected one PRI port of our TE410P to the telco, i need to have the analog card like the TDM400P or a B410P synchronous to the clock of our telco provider. otherwise faxing on the analog cards does not work or i get cracking noise or even hangups on my BRI lines, due to bit slips.