similar to: Two X100p clones. One not available for outbound?

I know Vonage doesn't officially have a "bring your own device" type program, but they do offer a softphone. Has anyone gotten Asterisk to connect directly to Vonage? This would be a great help!! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060329/5bc9f644/attachment.htm

Yes - the problem was a missing signalling line in zapata.conf. Now in and out work. Also, it was news that "reload" from the console doesn't reflect changes made in zaptel and zapata.conf entries. Any other config files that it doesn't reload? >From: "Asterisk@Home" <asteriskathome@yahoo.com> > >Did you go into AMP and configure some place for

I have asterisk at my home, which I have typically been using about 600 minutes outbound per month, over Vonage. I also have an old copper POTS from Verizon, which I only use for 7 digit and 800# dialing, as well as inbound. I am interested in setting up one or more SIP or IAX providers. Mostly for the experience of setting this stuff up for use with asterisk, but also partly to save money,

Since the X100P/X101P/Clone cards does not work in all countries that use DTMF based Caller-ID systems, I've developed a hardware that you connect to a serial port and the PSTN. You then run a perl script "cid_logger.pl" as a daemon, and modify extensions.conf to call an agi script whenever a call comes in, and if it's on the X100 card it will get the caller id information

I have a Vonage acct that uses the Cisco ATA186. Currently, I have the ATA186 plugged into a SPA3000 to act as the FXO port. I installed a X100P card with the idea of replacing the SPA3000. Now, when I plug in the ATA186 into the X100P card and make a call into the system (from cell phone) and hangup when the IVR is playing, Asterisk is not detecting a hangup and keeps looping the IVR. If

Howdy y'all, I am using an ATA-186, through Vonage, connected to my X100P. It works well - except, hanging up... The hangup doesn't register, most of the time, with Asterisk. Are there any known tweaks out there that I should look into? I've noted some have altered dsp.c, and rebuilt. Just curious to see what y'all think. Below is my zapata.conf file:: [channels]

I can either get the TE100P working or the 3 X100P clones working, but never both. I have the TE100P connected to a channel bank, and X100P clones to lines from the phone company. This is my zaptel.conf span=1,1,0,d4,ami fxsks=1-24 loadzone=us fxols=25-27 loadzone=us I then do [root@asterix root]# modprobe zaptel [root@asterix root]# modprobe wcte11xp ZT_CHANCONFIG failed on channel

I've dug down as far as I could on www.uspto.gov for anything remotely close to what is going on with Verizon and all searches end with only two possibilities in regards to what is going on. So unless the patent was issued to someone else and Verizon bought it, these are the only two possible patents this case could be based on... US 7,142,646 B2 Voice mail integration with instant

I'm new to asterisk and fror a cupple of days I heave been googleing the net for digium "clones", because it's very hard for me to get a digium card (X100P). Does anyone Know another substitute for X100P (I know that intel based modem with chip 537/MD3200 is working but I did not find any of those) ? I made it work with an Intel 536 (with a costumised driver that I found on

Greetings. I did some digging with Google, the wiki, and on the archives, but didn't find a recent conclusive answer. If this is answered in the wiki or archives somewhere, please point me to it. I'm in the process of setting up an Asterisk box for home use. I've got a X100P card on the way. I've not decided what analog adapter(s) to get yet. The only phone service to hook up

After over a month (well, ok, no more than an hour a day :) of planning, getting hardware, tinkering and testing, I'm about to my Ultimate Home Phone System (tm) online. Connectivity to the outside world is provided by: A. 1 POTS phone line connected through an X100P ($11/month, needed to carry DSL) B. 1 Vonage ATA186 connected through an X100P (needed for the rate center :( ) C. 3 Broadvoice

I have a strange problem in that when I receive a call through the X100P which is forwarded to my budgetone 100 then the voice quality is perfect both directions. However, if I make a call out from the budgetone to the same caller via the X100P the sound level is a lot lower and the quality a lot poorer. I've had to set the rx tx gain to 1.5 or I can hardly hear at all. Any ideas what is

List members, Is it possible to record outbound analog calls using an X100P? I was asked if I knew how to record all calls for a shop with 4 analog phones transparently to the end users. I thought Asterisk was a good fit for this and I envisioned using either Digium TDM400Ps or Sangoma A200s with 4 FXO and 4 FXS modules. The FXO modules would be connected to the existing PBX and the FXS

Specs: Fedora Core 3. Dual P3 600 (Dell PEdge 1300) SCSI Disks 1x X100P (channel 1) 1x TDM20 (channels 2+3) 1x Knockoff X100P (channel 4) I am looking to have all local and all toll free calls go outbound through the Copper line, and all long-distance and international to go out through the Vonage line. This way I can eliminate LD on my home line, and pay minimal LD charges through

I tried implementing my * and it didn't pass the spouse factor at this time. I wanted to hook it up for outbound only at this point to get a better handle on the dial plans and the echo problem. I thought this might have been done before as a natural part of testing - but maybe not. In wcfxo.c I found this: if (!wc->offhook && !wc->ringdebounce) { if

I just installed Asterisk on my server and I have Vonage softphone. I need my Asterisk server to receive calls through the Vonage Softphone DID and make outgoing calls through the Vonage ATA using an X100p to connect to it. Can someone help me out on configuring this? I really need this for my business and would greatly appreciate the help.

After two weeks of reading about asterisk and joining this mailing list, I finally decided jumping on the asterisk bandwagon... Asterisk rocks!!! I have a www.Stanaphone.com SIP (free) for incoming line and a www.VOIPJET.com IAX line for outbound. I also have a www.Vonage.com line (gives me 500 outbound minutes) and a Cingular cell phone (gives me 800 minutes) and I also use Skype fairly

Has anyone been able to get Asterisk to work with Verizon's VoiceWing service? I'm in the process of testing Asterisk to see if it will fit the needs of my company. Since I already have Verizon's VoiceWing VoIP service, I figured if I can tie into it, that would let me evaluate service going to a VoIP provider. I've done a bunch of searching, but didn't turn up

Has anyone had any success with this card? Thank you. Sandy.

0.8 appears to have been released. Start with that. It is very quick to update your current 0.6 or 0.7 iso. Just do this with rsync to do a differential copy: $ mv asteriskathome-0.7.iso asteriskathome-0.8.iso $ rsync -av --progress --partial \ prdownloads.sourceforge.net::sourceforge/a/as/asteriskathome/asteriskathome-0.8.iso . $ rsync -av \