similar to: Stability and motherboard questions with TE406P and TE410P

Hello, Now that we've had our new Digium TE406P card in production for 4 days we have discovered audio drop problems that happen randomly across all channels. Here's more about our setup: P4-3.2GHz 2GB ram Slackware Linux 10.1 with custom kernel 2.4.29 Asterisk 1.2beta1 Digium TE406P quad T1 card with the following attached: - 2 x RBS D4/AMI 24 channel T1s - 1 x RBS B8ZS/ESF 24 channel

I am getting ready to purchase my first Digium card to start experimenting with Asterisk. Before I make my purchase, I wanted to make sure I'm not going to have issues with these cards (need to see what the specs are on my box, 5V or 3.3V PCI ). I will be using Asterisk @ Home, so will be Asterisk v1.0.9. I took a quick poke at the lists, and it appears several people have been having

Hi, My configuration is pri----*(te405p)---iaxclient. My * version is 1.0.7 running on tyan dual opteron board. I have several problems. 1) inbound echo For outbound call(iaxclient-->pri), there is almost no echo. But for inbound(pri-->iaxclient), I can hear distinct echo. Can Sangoma a104 or digium te406p help this problem? 2)Today i received te406p. I know T1/E1 jumper. But how can i

Hi, I've installed an TE406p, asterisk1.2 on tyan opteron board. After installation there is no interrupts from TE406p. Is this board stable? Should i change * version to 1.0.9? Regards, Jason __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

I received a TE406P card from Digium yesterday and have done several tests on it and cannot get it working reliably with any Stable release or even CVS v1.0. What are other people that are using the TE406P card using for an Asterisk version? I tried 1.2.0 beta1 and it seemed to function well except for an unrelated issue with the beta release where the manager interface chokes under

Hi Guys, I need your recommendation which card to buy?The TE411P or TE406P do they have any difference?I check their brochures they are differ only when it comes to PCI slot voltages.Which card best to use?Btw,Il be using supermicro board with 3.3V and 5.5V?Will il be experiencing problem during the implementation later on if i choose the wrong PCI voltage options?Will it depends on

I just wanted to post here and let everyone know that the TE406P (quadspan T1/E1 with hardware echo can) kicks some serious ass. We've been running a PRI now for over a year with Asterisk (every single call in and out is through two Asterisk boxes, including faxes) and while the software based echo cancellation is more than adequate, we'd get the occassional "edgy" echo and

Hi all, I've got a TE410p connected via T1 to four channel banks (2 FXO and 2 FXS), no PRIs. Some users are complaining that they hear clicks and pops on the FXS lines, generally when they pick up the phone it's noisy. This happens only after a while, e.g. after a fresh restart of everything, all is fine but after some time these noises start appearing. From what I've read on the

Guys, I'm trying to configure a TE406P with MFC/R2. here goes my zaptel.conf: span=1,0,0,ccs,hdb3,crc4 cas=1-15:1101 dchan=16 cas=17-31:1101 span=2,0,0,ccs,hdb3,crc4 cas=32-46:1101 dchan=47 cas=48-62:1101 The first strange behavior is that the: zap show status shows this: Description Alarms IRQ bpviol CRC4 T4XXP (PCI) Card 0 Span 1

Hi all, I am having problems detecting fax on a client site using the TE406P (card with echo cancellation module) under 1.2 and was wondering if anybody was having or has had similar problems? Currently I can not get the system to detect fax for love nor money, in zapata.conf the relevant entries are set to: faxdetect=outgoing and I have a fax extension in the necessary context. I have taken

Hi, Does anyone know if it's possible to have 1 port of TE406P to provide T1 PRI to other VoIP gateways? I am trying to provide T1 PRI to one of our old Clarent gateways to integrate it to Asterisk. Can anyone help? Thank you. Andy

I've been running into some issues with a TE410P and lost audio and similar which I have tracked down to some apparent incompatibilities between the version of Linux I'm running and my hardware - which causes zttest to not get 100% of the samples every time. Instead of fighting this on the machine it's running on (which I don't want to run it on long-term anyways), I'm wanting

Hello List I am having a rather big problem with a sangoma A104 card, I just installed to replace a Digium TE410 card, that was acting up. But now we have a problem with the sangoma card. It runs great after being started, and calls proceed as normal, but after about 1 hour, it stops being able to make and receive calls. If I run wanpipemon debug, can see that the card still receives

I have had a tough time finding a good stable combination of motherboard with either a TE410P or TE406P and would like to solicit input for suggestions. Currently, we are utilizing the Supermicro P8SCT. I have disabled the onboard NIC cards and I am currently using a separate 3COM PCI card. I have tried both cards in this board with mixed results. This is the third motherboard we have used and

Hi, Is there anybody in this list who had experience with two TE410 cards on a server ? I know that the cards can?t share IRQs and I?m seeing to have two cards on a x335 IBM Xeon server. TIA -- Juanjo sin .sig

Hi, Ok, I put the new TE410 into our system last night - This is the second TE410P card. There is also TDM400P in Slot 5 with IRQ 9 which is shared with aic7xxx (SCSI) According to "cat /proc/interrupts", the new card is in the second slot using IRQ 11 (the first card is in slot 1 on IRQ 10 - but always has been). With only the original card install, there has been no issues with

It works out that name "Unified t4xxp/t2xxp driver" is not accepted anymore by 2.6.13 kernel. Need to remove "/" for it to load properly > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Boris Bakchiev > Sent: Monday, 15 August 2005 18:17 > To:

Hey there, What recommendations does anybody have as to motherboards known to work well with the Digium TE110P T1 interface cards and the TDM400P analog POTS interface cards? We currently make use of the TE110P for our T1 (esf w/ b8zs - not a PRI) and have experienced many issues caused by our PBX's motherboard. Additionally, we built a server to become our new PBX, but that machine runs

Hi, I've been asked to find a server that is capable of running the Digium TE410P card. We usually get Dell PE servers and after a quick look I think the PE 1800 has the required slot: Six Total: 2 PCI Express (x8 lane & x4 lane); 2 x 64-bit/100MHz PCI-X; 1 x 32-bit/33MHz PCI (5v) and 1 x 64-bit/66MHz PCI Has anyone got this hardware, does it work with the card and asterisk? Thanks,

Hi, I have this strange problem I need some help with.. It appears that I have harddisk noise captured by a Digium TE410P card (Same problem on 2 identical machines..) The machines are two Compaq Proliant DL320 G3's... Does anyone else have this problem.. Kind Regards Claus Futtrup --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com).