similar to: Remote dialtone

Hi, I got my * working fine with FWD at office with 2 extensions, i receive calls and i can make calls thru FWD. I got also my * at home, and i connected it using auth=rsa. From my home, i can make calls using my office iax, but if i try to redirect incomming calls from FWD to my * at home, it rejects the call. I created the pub/key pairs for rsa and its working ok and i just pasted the

I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal ---------------- No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone,

Hi in order to keep the dial tone after pressing 9 for 'outside line' I have this in my extensions.conf [localpstn] ignorepat => 9 exten => _9[123456789]XXXXXXX,1,Dial,${PSTN}/${EXTEN:1} exten => _9[123456789]XXXXXXX,2,Congestion this is properly included in the handsets' context but the dial tone disappears after pressing 9. am I missing something? thanks in advance

If I have multiple Sipura 3000 device how can I dial out properly? I can receive call without any problem and that's working really well. Caller ID is shown and when someone call he get's the welcome message the same way I have it configure with the X100P card. I don't seem to have any echo problem with the Sipura 3000 (but I do with X100P cards) My main concern is for

Hi folks - I've recently returned to asterisk after an eighteen month break. I've two sip providers - gradwell in the UK (inbound and outbound) and talklite in the US (outbound only). I've managed to get outbound dialing working but am not receiving any calls from gradwell. I've included my sip.conf and extensions.conf as well as the output from tethereal. When a call is placed

extensions.conf has ignorepat => 9 exten => _9X.,1,Dial(Zap/G2/${EXTEN:1}) The first user to try it asked if instead of keeping the same dialtone after pressing 9, if I could play a different dialtone. Can this be done? I'm running asterisk 1.0.0 in case that matters.

Hello, Sorry, I know I read this somewhere but now I can't find it when I need it. I'd like to force a call to go out one line if we dial '9' first and then the number. Same for '8' only I will force it out a different line. There is a parameter or a method to allow the dialtone to come back after pressing the first 9... but I can't remember how to do it. Anyone know?

HI, I'm using netmeeting to connect to an asterisk server and dial out. my extension looks like this exten => s,1,Dial,Zap/1/ Unfortunatelly the number that I have dialed in Netmeeting is lost ;-( If I hardcode the number on the line above, like ... exten => s,1,Dial,Zap/1/6642794 ... everything works fine What am I missing?

Hello all, I'm running Asterisk 1.4.5 and Zaptel 1.4.3 on Debian Etch i386 with the Digium's Dev Kit that comes with 1 FXO and 1 FXS. How do I configure my home PBX in such a way that whenever someone calls on my trunkline (PSTN) number, he/she will hear a customized ring tone, probably playing an MP3 file, instead of a boring standard ring tone while the extension number that is

Hi to all, I'm trying to make outside call in this way : ignorepat => 0 exten => _0.,1,Dial(CAPI/xxxxxxx:b${exten}) But the first number 0 is not ignored. I'm doing something wrong ? Bye

I have the following setup.. [extensions] ; all extensions defined here. exten => 1234,.... exten => 1235,.... [dial-out] ; PSTN dialout config ignorepat = 9 exten => _9,.... exten => h,.... [local] ; phone context in sip.conf is here.. include => extensions include => dialout The question is where will the "h" extension be active?? it appears to run for ALL,

hi, I am new to * and setting up a test system. here my setup : - debian (from knoppix 3.3) - Asterisk 0.7.1 (from the debian package) - AVM Fritz card used with i4l - softphone I use for testing SJphone on windows - I can make great softphone - softphone calls - I can call from an outside line * and get connected to a softphone here my problem: I can not make outbound calls. I place a call

How can I dial *67 on a Sipura 3000 if I dial from a SIP phone connected on an asterisk server. I always get a message saying that authentication failed for INVITE for sip221@192.168.1.6. If I dial a number without doing *67 it's working fine... sip 221 being the extension of my Cisco phone and 192.168.1.6 being the IP of my asterisk server... I have my outgoing context configure

Hi, I've been working on starting a lab of end to end asterisk system and now most of pieces seem to be working. The two asterisk servers are connected by T1. Both servers have a couple of SIP phones connected and one of the servers has a FXS card with an analog phone hanging. I can make calls across the T1 link however there is one thing that I don't understand. I need to append one

Guys.. Im new to asterisk but is it possible to simulate a dialtone for example, in other PBX when you pick up the phone you can hear a certain dialup, which is the PBX dialtone, and when you hit 9, you can hear the PSTN dialtone, is this possible? __________________________________________________________________ Anton Krall

Hi everyone! I'd like to create the following: a user picks up the phone (gets a dial tone), dials '0' for an 'outside' line, gets a second (different?) dialtone, and is able to enter an external phone number. How do I implement this in extensions.conf...? Regards, Evert

Hi... I have the next problem.. I have a FXO card with i can make calls but i cant recive calls. At the consol, i get the next error: -- Zap/2-1 is ringing -- Zap/2-1 is ringing -- Zap/2-1 answered Zap/1-1 -- Attempting native bridge of Zap/1-1 and Zap/2-1 WARNING[262160]: File chan_zap.c, Line 2857 (zt_handle_event): Ring/Off-hook in strange state 6 on channel

I've having a big problem after having upgraded to 1.2.4 and chan_capi-cm 0.6.4 When making outgoing calls I don't seem to have any control over the CLI that is presented to the called party -- it can be any one of the MSNs allocated to the line, allocated on what seems to be a random basis. This is on a BT Business Highway line (which is essentially an ISDN2e line with two built-in

I've just started consulting for a SME client based in Reston Virginia. They don't know it yet but they are going to need a hosted asterisk service and some DID's. Email me if you are able to provide 10 DID's in Reston (must be able to be ported away!!) and hosted Asterisk with end user configurable IVR etc. Probably only 5-8 users at the moment BUT... they'll be

Hi, I'm trying to set up an Asterisk pbx based on a Fedora Core 1 Linux box (customized kernel version 2.4.24). I want calls from my SIP soft-phones to simply be dumped onto the PSTN line via a BRI (EuroISDN). I have a cheap HFC-S based PCI ISDN card connected to the NT1+ interface, so I need zaphfc. I've read everything I've found at www.voip-info.org, then I've downloaded the