similar to: Problem w/ Dial Command on Zap channel

Hi, Asterisk Version : 1.2.15 Card : TDM11B (1 x FXO , 1 x FXS) I have internal dialling working okay SIP->ZAP (analogue phone) and ZAP (analogue phone) -> SIP. The problem comes when I try and make a outbound call. Here is my extensions.conf :- Code: [incoming] exten => s,1,GoToIfTime(17:00-09:00\mon-fri\*\*?outofhours|s,1) exten => s,2,GoToIfTime(*\sat-sun\*\*?outofhours|s,1)

> -----Original Message----- > From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users- > admin@lists.digium.com] On Behalf Of Matteo Brancaleoni > Sent: Monday, July 26, 2004 5:22 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Can't dial SIP<->EuroISDN (HFC-S based > PCIISDN card): Unable to create channel of type 'Zap'

Hi, I still cant dial out on Zap and I really have no clue why. I'm using Asterisk Asterisk 1.2.6 and Zaptel 1.2.5 with Digium card 4 ports, 31 channels each and able to receive incoming calls and fax perfectly. I've done this in my dial plan. exten => 111,1,Answer() exten => 111,n,Ringing() exten => 111,n,Wait(2) exten => 111,n,AbsoluteTimeout(30) exten =>

I've setup * with TDM400P w/1 FXS, 3 FXO modules. I've one analog phone connected to TDM400P FXS module, 1 PSTN line to one of the FXO module(ZAP) , and 2 analog phones connected to Sipura 2000 (SIP). The calls between SIPs and zap phone (fxs) are OK. But 2 issues cannot be solved: 1. To dial to PSTN via zap phone, the setup in extensions.conf with the following exten =>

I'm not sure if it's the same problem but your error message likely the same. after i additing pridialplan=local in the zapata.conf i'm able to make outboundcalls (located in germany) marcus -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Gesendet: Dienstag, 11. April 2006 16:33 An:

Does anyone kmow what these errors mean or how they can be fixed. I'm using asterisk on a Fedora Core 2 box with a TDM400P with 2 fxo and 2 fxs ports. Dec 29 17:17:52 WARNING[6019]: chan_zap.c:5469 ss_thread: Channel Zap/4-1 in prering state, but I have nothing to do. Terminating simple switch, should be restarted by the actual ring. -- Hungup 'Zap/4-1' == Starting post

Dear all, I tried to make a call with extensions.conf. exten=> _00[1-9].,1,Dial(zap/g1/${EXTEN}) exten=> _00[1-9].,2,NoOP(ANSWEREDTIME=${ANSWEREDTIME}) exten=> _00[1-9].,102,Hangup But the 2 and 102 will not be executed. So I can get the correct answered time via 2. Is any idea about it? Is it the problem of my ZAP channel's configuration? My zapata.conf is as below:

Hi, I'm trying to set up a basic FXO <> SIP gateway. That is, I want calls from my SIP phone to simply be dumped onto the POTS line. My (entire) extensions.conf is: [from-sip] exten => _9NXXXXXX,1,Dial(ZAP/1/${EXTEN}) and my zaptel.conf is: fxsks=1 loadzone=us defaultzone=us and my zapata.conf is: context=incoming signalling=fxs_ks echocancel=yes

I am using version: CVS-v1-0-12/13/04-18:46:23 with a TDM400p (2 fxo, 2 fxs ports) and I keep getting errors along with phantom calls: Dec 21 16:02:07 NOTICE[5872]: chan_zap.c:5363 ss_thread: Got event 17 (Polarity Reversal)... Dec 21 16:02:14 WARNING[5872]: chan_zap.c:5434 ss_thread: CallerID returned with error on channel 'Zap/4-1' my analog phone reads caller ID info fine when

Hi While use "Dial" command on Zap FXO port for Outbound call, if some function like timeout,busy,etc can not available just like that on FXS port? Like the followings, the Zap is FXO and timeout is 10 but always no timeout occurs. Also can not jump to piority 102 while called party is busy, it's just be disconnected exten => s,1,Dial(Zap/g1/0738290344|10) exten =>

I recently purchased a Asterisk Developer's Kit (TDM) and now have it outfitted with 2 FXO modules and 2 FXS modules. I'm not using the X100P modem card that came with the kit. I'm having problems with dialing out on my POTS line. Successful dial out is intermittent. About 50% of the time the call goes through. The other 50% it is dialing the wrong number. ( I can hear the error

I'm trying to add an emergency dial to my context. However, when I try to dial it, I get caught in an endless loop. For debugging, I have pared out nearly all the control flow and just have ChanIsAvail() and Dial() called. Using two different extensions to call teh same number, I get two different actions by *. Here is the vvverbose output: -- Starting simple switch on

Hi, I'm trying to set up an Asterisk pbx based on a Fedora Core 1 Linux box (customized kernel version 2.4.24). I want calls from my SIP soft-phones to simply be dumped onto the PSTN line via a BRI (EuroISDN). I have a cheap HFC-S based PCI ISDN card connected to the NT1+ interface, so I need zaphfc. I've read everything I've found at www.voip-info.org, then I've downloaded the

Hello. I'm trying to upgrade my asterisk installation to most current CVS version. Currently I am running CVS-03/24/04-07:26:16 and dialing out works fine. When I install the latest CVS, outbound dialing fails, but inbound and internal calls work just fine. == Spawn extension (it, 9651246****, 2) exited non-zero on 'SIP/8202-d359' -- Executing

I'm trying to get this zap dial to work. I want to send DNIS and ANI to other system (ZAP/g2) at answer, while the caller hears ring (RBT). I hear the RBT, but callerid and exten is not sent to other T1 - The ZAP/g2 T1 is standard D4, SF, E&M Wink Start. - At ZAP/g2 wink, asterisk should send DTMF "*ANI*DNIS*" exten => _XXXX,1,NoOp,${CALLERID} exten =>

I read the wiki and looked at the examples, but I'm still having problems. I have a Digium 4 port card with POTS lines plugged into all four ports. How do I play the congestion tone the the caller when they try and dial out but all the lines are in use? should something like this work? [dial-trunklocal] ; Local calls ignorepat => 9 exten => _9NXXXXXX,1,Dial(${TRUNK1}/${EXTEN:1}) exten

Hi all, Our Asterisk box sends calls outbound via either SIP (through our VoIP provider) or an E1 PRI (directly connected via a TE410P). When we dial a number that is engaged via our VoIP provider we get the following on the Asterisk console (numbers and IP addresses changed to protect the innocent): -- Called 12345678@sip-outbound -- Got SIP response 486 "Busy here" back from

Hi, I'm having a problem with the timeout option when dialing a ZAP channel. The goal is to ring a number for 15 seconds, if no one picks up, go to voicemail. The dial command is: exten => s,1,Dial(ZAP/1/6135551111,15) exten => s,2,VoiceMail(u1) exten => s,102,VoiceMail(b1) The call will continue to ring beyond 15 seconds. What's interesting is that a SIP channels does not have

Hi, I'm trying to set a rule to dial out through multiple Zap groups so that, say, g0 is the cheaper POTS lines group and must be used first. However, if g0 is busy or disconnected then try dialing out g1. My g0 group is made up of 4 analog lines connected to a 4-FXO card. I disconnected the RJ-11 wires from the FXO card to simulate a line disconnection. So theoretically all calls should

Hi, I've created a test at "extensions.conf" like this with 3 steps: ; When dial 5555, get the first available channel and dial do 482343400 exten => 5555,1,Dial(Zap/g1/482343400,5,rt) ; When dial 5555, get the channel 20 and dial do 482343400 exten => 5555,2,Dial(Zap/20/482343400) ; Go to Voicemail 1234 exten => 5555,3,Voicemail(u1234) I've tried using just the