Richard Reina
2004-Dec-21 16:30 UTC
[Asterisk-Users] CallerID returned with error on channel 'Zap/4-1'
I am using version: CVS-v1-0-12/13/04-18:46:23 with a TDM400p (2 fxo, 2 fxs ports) and I keep getting errors along with phantom calls: Dec 21 16:02:07 NOTICE[5872]: chan_zap.c:5363 ss_thread: Got event 17 (Polarity Reversal)... Dec 21 16:02:14 WARNING[5872]: chan_zap.c:5434 ss_thread: CallerID returned with error on channel 'Zap/4-1' my analog phone reads caller ID info fine when plugged directly into the the phone jack. Any suggestions on what this problem is or how to fix it would be greatly appreciated as I have been stuck on this problem for a couple weeks. Below are my config files: /etc/zaptel.conf fxoks=1-2 fxsks=3-4 loadzone=us defaultzone=us /etc/zapata.conf [channels] language=en echocancel=yes echotraining=yes rxgain=0.0 txgain=0.0 immediate=yes signalling=fxo_ks context=internal channel => 1,2 signalling=fxs_ks usecallerid=yes group=1 context=incoming channel => 3,4 /etc/asterisk/extensions.conf ; ; Static extension configuration file, used by ; the pbx_config module. This is where you configure all your ; inbound and outbound calls in Asterisk. ; ; ; The "General" category is for certain variables. ; [general] ; ; If static is set to no, or omitted, then the pbx_config will rewrite ; this file when extensions are modified. Remember that all comments ; made in the file will be lost when that happens. ; ; XXX Not yet implemented XXX ; static=yes ; ; if static=yes and writeprotect=no, you can save dialplan by ; CLI command 'save dialplan' too ; writeprotect=no ; You can include other config files, use the #include command (without the ';') ; Note that this is different from the "include" command that includes contexts within ; other contexts. The #include command works in all asterisk configuration files. ;#include "filename.conf" ; The "Globals" category contains global variables that can be referenced ; in the dialplan with ${VARIABLE} or ${ENV(VARIABLE)} for Environmental variable ; ${${VARIABLE}} or ${text${VARIABLE}} or any hybrid ; [globals] CONSOLE=Console/dsp ; Console interface for demo ;CONSOLE=Zap/1 ;CONSOLE=Phone/phone0 IAXINFO=guest ; IAXtel username/password ;IAXINFO=myuser:mypass TRUNK=Zap/g2 ; Trunk interface TRUNKMSD=1 ; MSD digits to strip (usually 1 or 0) ;TRUNK=IAX2/user:pass@provider ; ; Any category other than "General" and "Globals" represent ; extension contexts, which are collections of extensions. ; ; Extension names may be numbers, letters, or combinations ; thereof. If an extension name is prefixed by a '_' ; character, it is interpreted as a pattern rather than a ; literal. In patterns, some characters have special meanings: ; ; X - any digit from 0-9 ; Z - any digit from 1-9 ; N - any digit from 2-9 ; [1235-9] - any digit in the brackets (in this example, 1,2,3,5,6,7,8,9) ; . - wildcard, matches anything remaining (e.g. _9011. matches ; anything starting with 9011 excluding 9011 itself) ; ; For example the extension _NXXXXXX would match normal 7 digit dialings, ; while _1NXXNXXXXXX would represent an area code plus phone number ; preceeded by a one. ; ; Each step of an extension is ordered by priority, which must ; always start with 1 to be considered a valid extension. ; ; Contexts contain several lines, one for each step of each ; extension, which can take one of two forms as listed below, ; with the first form being preferred. One may include another ; context in the current one as well, optionally with a ; date and time. Included contexts are included in the order ; they are listed. ; ;[context] ;exten => someexten,priority,application(arg1,arg2,...) ;exten => someexten,priority,application,arg1|arg2... ; ; Timing list for includes is ; ; <time range>|<days of week>|<days of month>|<months> ; ;include => daytime|9:00-17:00|mon-fri|*|* ; ; ignorepat can be used to instruct drivers to not cancel dialtone upon ; receipt of a particular pattern. The most commonly used example is ; of course '9' like this: ; ;ignorepat => 9 ; ; so that dialtone remains even after dialing a 9. ; ; ; Here are the entries you need to participate in the IAXTEL ; call routing system. Most IAXTEL numbers begin with 1-700, but ; there are exceptions. For more information, and to sign ; up, please go to www.gnophone.com or www.iaxtel.com ; [iaxtel700] exten => _91700XXXXXXX,1,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel) ; ; The SWITCH statement permits a server to share the dialplain with ; another server. Use with care: Reciprocal switch statements are not ; allowed (e.g. both A -> B and B -> A), and the switched server needs ; to be on-line or else dialing can be severly delayed. ; [iaxprovider] ;switch => IAX2/user:[key]@myserver/mycontext [trunkint] ; ; International long distance through trunk ; exten => _9011.,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}) exten => _9011.,2,Congestion [trunkld] ; ; Long distance context accessed through trunk ; exten => _91NXXNXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}) exten => _91NXXNXXXXXX,2,Congestion [trunklocal] ; ; Local seven-digit dialing accessed through trunk interface ; exten => _9NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}) exten => _9NXXXXXX,2,Congestion [trunktollfree] ; ; Long distance context accessed through trunk interface ; exten => _91800NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}) exten => _91800NXXXXXX,2,Congestion exten => _91888NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}) exten => _91888NXXXXXX,2,Congestion exten => _91877NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}) exten => _91877NXXXXXX,2,Congestion exten => _91866NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}) exten => _91866NXXXXXX,2,Congestion [international] ; ; Master context for international long distance ; ignorepat => 9 include => longdistance include => trunkint [longdistance] ; ; Master context for long distance ; ignorepat => 9 include => local include => trunkld [local] ; ; Master context for local, toll-free, and iaxtel calls only ; ignorepat => 9 include => default include => parkedcalls include => trunklocal include => iaxtel700 include => trunktollfree include => iaxprovider ; ; You can use an alternative switch type as well, to resolve ; extensions that are not known here, for example with remote ; IAX switching you transparently get access to the remote ; Asterisk PBX ; ; switch => IAX2/user:password@bigserver/local [macro-stdexten]; ; ; Standard extension macro: ; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well ; ${ARG2} - Device(s) to ring ; exten => s,1,Dial(${ARG2},20) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER) exten => s-NOANSWER,1,Voicemail(u${ARG1}) ; If unavailable, send to voicemail w/ unavail announce exten => s-NOANSWER,2,Goto(default,s,1) ; If they press #, return to start exten => s-BUSY,1,Voicemail(b${ARG1}) ; If busy, send to voicemail w/ busy announce exten => s-BUSY,2,Goto(default,s,1) ; If they press #, return to start exten => s-.,1,Goto(s-NOANSWER,1) ; Treat anything else as no answer exten => a,1,VoicemailMain(${ARG1}) ; If they press *, send the user into VoicemailMain [demo] ; ; We start with what to do when a call first comes in. ; exten => s,1,Wait,1 ; Wait a second, just for fun exten => s,2,Answer ; Answer the line exten => s,3,DigitTimeout,5 ; Set Digit Timeout to 5 seconds exten => s,4,ResponseTimeout,10 ; Set Response Timeout to 10 seconds exten => s,5,BackGround(demo-congrats) ; Play a congratulatory message exten => s,6,BackGround(demo-instruct) ; Play some instructions exten => 2,1,BackGround(demo-moreinfo) ; Give some more information. exten => 2,2,Goto(s,6) exten => 3,1,SetLanguage(fr) ; Set language to french exten => 3,2,Goto(s,5) ; Start with the congratulations exten => 1000,1,Goto(default,s,1) ; ; We also create an example user, 1234, who is on the console and has ; voicemail, etc. ; exten => 1234,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up) exten => 1234,2,Macro(stdexten,1234,${CONSOLE}) exten => 1235,1,Voicemail(u1234) ; Right to voicemail exten => 1236,1,Dial(Console/dsp) ; Ring forever exten => 1236,2,Voicemail(u1234) ; Unless busy ; ; # for when they're done with the demo ; exten => #,1,Playback(demo-thanks) ; "Thanks for trying the demo" exten => #,2,Hangup ; Hang them up. ; ; A timeout and "invalid extension rule" ; exten => t,1,Goto(#,1) ; If they take too long, give up exten => i,1,Playback(invalid) ; "That's not valid, try again" ; ; Create an extension, 500, for dialing the ; Asterisk demo. ; exten => 500,1,Playback(demo-abouttotry); Let them know what's going on exten => 500,2,Dial(IAX2/guest@misery.digium.com/s@default) ; Call the Asterisk demo exten => 500,3,Playback(demo-nogo) ; Couldn't connect to the demo site exten => 500,4,Goto(s,6) ; Return to the start over message. ; ; Create an extension, 600, for evaulating echo latency. ; exten => 600,1,Playback(demo-echotest) ; Let them know what's going on exten => 600,2,Echo ; Do the echo test exten => 600,3,Playback(demo-echodone) ; Let them know it's over exten => 600,4,Goto(s,6) ; Start over ; ; Give voicemail at extension 8500 ; exten => 8500,1,VoicemailMain exten => 8500,2,Goto(s,6) ; ; Here's what a phone entry would look like (IXJ for example) ; ;exten => 1265,1,Dial(Phone/phone0,15) ;exten => 1265,2,Goto(s,5) ;[mainmenu] ; ; Example "main menu" context with submenu ; ;exten => s,1,Answer ;exten => s,2,Background(thanks) ; "Thanks for calling press 1 for sales, 2 for support, ..." ;exten => 1,1,Goto(submenu,s,1) ;exten => 2,1,Hangup ;include => default ; ;[submenu] ;exten => s,1,Ringing ; Make them comfortable with 2 seconds of ringback ;exten => s,2,Wait,2 ;exten => s,3,Background(submenuopts) ; "Thanks for calling the sales department. Press 1 for steve, 2 for..." ;exten => 1,1,Goto(default,steve,1) ;exten => 2,1,Goto(default,mark,2) [default] ; ; By default we include the demo. In a production system, you ; probably don't want to have the demo there. ; include => demo ; ; Extensions like the two below can be used for FWD, Nikotel, sipgate etc. ; Note that you must have a [sipprovider] section in sip.conf whereas ; the otherprovider.net example does not require such a peer definition ; ;exten => _41X.,1,Dial(SIP/${EXTEN:2}@sipprovider,,r) ;exten => _42X.,1,Dial(SIP/user:passwd@${EXTEN:2}@otherprovider.net,30,rT) ; Real extensions would go here. Generally you want real extensions to be 4 or 5 ; digits long (although there is no such requirement) and start with a single ; digit that is fairly large (like 6 or 7) so that you have plenty of room to ; overlap extensions and menu options without conflict. You can alias them with ; names, too and use global variables ;exten => 6245,1,Dial(SIP/Grandstream1,20,rt) ; permit transfer ;exten => 6245,1,Dial(SIP/Grandstream1&SIP/Xlite1,20,rtT) ;exten => 6361,1,Dial(IAX2/JaneDoe,,rm) ; ring without time limit ;exten => 6389,1,Dial(MGCP/aaln/1@192.168.0.14) ;exten => 6394,1,Dial(Local/6275/n) ; this will dial ${MARK} ;exten => 6275,1,Macro(stdexten,6275,${MARK}) ; assuming ${MARK} is something like Zap/2 ;exten => mark,1,Goto(6275|1) ; alias mark to 6275 ;exten => 6536,1,Macro(stdexten,6236,${WIL}) ; Ditto for wil ;exten => wil,1,Goto(6236|1) ; ; Some other handy things are an extension for checking voicemail via ; voicemailmain ; ;exten => 8500,1,VoicemailMain ;exten => 8500,2,Hangup ; ; Or a conference room (you'll need to edit meetme.conf to enable this room) ; ;exten => 8600,1,Meetme(1234) ; ; Or playing an announcement to the called party, as soon it answers ; ;exten 8700,1,Dial(${MARK},30,A(/path/to/my/announcemsg)) ; ; For more information on applications, just type "show applications" at your ; friendly Asterisk CLI prompt. ; ; 'show application <command>' will show details of how you ; use that particular application in this file, the dial plan. [incoming] exten => s,1,Dial(Zap/1r2) [internal] exten => 100,1,Dial(Zap/1) exten => 200,1,Dial(Zap/2) ;exten => 200,2,Voicemail(u100) ; added 11/29 ;exten => 200,102,Voicemail(b100) ; added 11/29 exten => _X.,1,Dial(Zap/4/ww${EXTEN}) ; allows for dialing out __________________________________ Do you Yahoo!? Yahoo! Mail - now with 250MB free storage. Learn more. http://info.mail.yahoo.com/mail_250
Hello: I am looking for alternatives to Broadvoice. Comparability in price but with much better services (stable) to Asterisk users. Please email off-list. Thanks, Terrell S. Patrick www.dealerbackup.net (800) 651-4484 "The best time to respond to a disaster is before it happens. A relatively small investment of time and money now may prevent severe damage and disruption of life and business in the future."