similar to: asterisk configurations

Hi All After lots of try I was successfull in connecting to PSTN to make and recevice calls , I used AMP for this purpose , now I wanted to try out this Asterisk server answers the call , ask for the extensions and then after the extension entered the call is forwarded /transfered to the extension no , I use Asterisk 1.2.4, configured using AMP , on RHEL3 I did some configuration for my

Hello Guys, I'm somewhat of a newbie and am desperately seeking for some help... I've managed to get asterisk up and running on my server, and signed up with a broadvoice account... I'm having no problem dialing and communicating between extensions, but whenever anyone tries to call my broadvoice account, they are greeted by no ring or anything, but rather simply a direct to

hi, i have a pronlem connecting call from pstn with the following confuguration, please advice extensions.conf [from-trunk] include => from-pstn [from-pstn] include => from-pstn-custom include => ext-did include => from-pstn-timecheck exten => fax,1,Goto(ext-fax,in_fax,1) extensions_custom.conf [from-pstn-custom] exten => s,1,Answer exten =>

XO fixed my caller ID name. I am using FreePBX and I can include a "wait" to my custom extensions. Is there a way to add a wait to the whole PRI? I assume that if I set immediate to yes, I can then have a "s" extension do the wait, but how would it get from the "s" to the DID extension? (also, I would rather not answer every call) Is there a "magic" spot

hi, I hope someone can help me:-) we’ve got a freepbx server. there are 2 special extensions (2001, 2002). if someone calls this extensions (or a call is forwarded to these extensions) and these extension hangup (not the caller party), then we’d like to put the calls back into a queue (1000) and wouldn’t like to hangup. I read your description about hangup hooks:

I am new to Asterisk and the protocol/language complex world of VoIp and PBX. But I have a dedicated machine running A@H 2.8, a single TDM400P with one FXS module card connected to a standard analog phone. The second card is an X100P connected to my analog PSTN phone line. I also have Grandsteam IP phone plugged into the network and a couple of x-lite SIP softphones. I can make outgoing calls on

/**************************************************************************** * * * Always Be Conferencing (ABC) * * * * Creator: chris @ Penguin PBX Solutions * *

*@home has this for it's incoming fax macro --- start snip --- [ext-fax] exten => in_fax,1,GotoIf($[${FAX_RX} = system]?2:analog_fax,1) exten => in_fax,2,Macro(faxreceive) exten => in_fax,3,system(tiff2ps -2eaz -w 8.5 -h 11 ${FAXFILE} | ps2pdf ${FAXFILE}.pdf) exten => in_fax,4,system(mime-construct --to ${EMAILADDR} --subject "Fax from ${CALLERIDNUM}

Does anyone know of any obscur reference for detecting an incoming fax. I currently have AMP running and everything else is working great. Installed the spandsp patches and software... using the default AMP extensions.conf, I start sending a fax, I hear it pick up and transfer to voicemail after 20s. Fax is set for system... Here is the detail from the extensions.conf [global] FAX_RX = system

Hi, I'm struggling to get busydetect to work. I'm using asterisk 1.2.1 and a digium TDM04B (4 port FXO) card. I've set busydetect=yes, busycount=6 and busypattern=300,200 in zapata.conf and i've modified zondata.c with a busy setting of 620+480, 300/200 which is the busysignal received from Korea Telecom. Asterisk isn't detecting the busy signal and doesn't hangup.

Hello, I think you should handle the fax in the h (for Hangup) extension (which is, after your fax was received), instead of using the priorities following the fax reception (as in your example). Have a look at the different examples in the wiki, like http://www.voip-info.org/wiki-Asterisk+fax: [fax] exten => 666,1,Macro(faxreceive) exten => h,1,system(/usr/sbin/mailfax ${FAXFILE}

How many times do you ask for help here before getting a respone? Every single thing I do No matter what I get busy extensions. I am willing to pay someone to help here. Anybody got a clue? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050802/d0d1326c/attachment.htm

Hello R community, I am hoping for some help with the following problem. I have a data frame containing various groups. These groups are identified by a grouping variable. I would like to add a sequential ID number to each group to later sort these individuals within each group by this ID number. Here is what the final result should look like: ID group var2 1 1 1 2 1 2 3

I have an X100P clone hocked up to an analog line of my PRI. I can use it to dial out. but when I call the extension it answers and says "GOODBY" I have a Livevoip DID which successfuly rings to ext 202 I am using asterisk@home and through the AMP inface the line should ring to ext 202 Below are Asterisk Messages, Extensions.conf and Extensions_additional.conf Extensions.conf

Hi list, Does samba support IDN (Internationalized domain name) ? I created a domain in windows server 2008 (function level 2003) and domain name is "TEST???.COM <http://xn--test-ooa2iub.COM>". I want to join domain as a member. When I run "kinit administrator at TEST???.COM" after setting krb5.conf, kinit failed. kinit administrator at TEST???.COM Conversion error:

Hi, I have configured an Asterisk server with TDM01P (1FXO) for testing purpose. The interface I'm using is AMP. I want to configure my extension so that when I dial from my mobile phone to the asterisk line, I want it to transfer the call to any extension, say 3042 and after a particular number of rings, transfer the call to voice mail so that I can record my message. My Zaptel.conf is as

I'm having a problem receiving incoming faxes and I'm hoping someone here can help me out. My system is a PBX in a Flash with one dahdi card for my incoming analog lines and another dahdi card for my analog devices (fax and modem). My dahdi-channels.conf file looks like: ; Autogenerated by /usr/sbin/dahdi_genconf on Tue Jun 23 14:56:24 2009 ; If you edit this file and execute

I've upgraded Asterisk from CVS, spandsp and app_txfax and app_rxfax but i'm still unable to send/receive faxes :-(. I'm using amp_fax to send and this is what i get from logs: Sep 6 11:02:52 VERBOSE[10750]: -- Attempting call on Zap/g1/666 for application txfax(/var/tmp/ast_fax-1125997371.10240.1804289383.0|caller) (Retry 1) Sep 6 11:02:52 DEBUG[10750]: Dialing

Hi, I have the following manifest that basically syncs the time for nodes really out of sync and ntpd can''t drift the time back fast enough. The problem is that when puppet executes the catalog, and puppet changes the time, puppet never finishes because it can''t calculate the "run time" since puppet changed the time during the puppet run. Is this a bug? Should I do

Does anyone use tb.init TIMECHECK to change rate/ceil for classes based on periods over the day ? I had problems setting the right syntax. Can anyone help me with a quick example. I have tried the following with no success: LEAF=sfq RULE=xx.xx.xx.xx TIME=06:00-18:00;128Kbit TIME=18:00-06:00;256Kbit RATE=196Kbit _______________________________________________ LARTC mailing list