similar to: ISDN BRI and UK Premium Rate Numbers

Can anybody point me in the right direction please? I'm having some issues getting iaxmodem and hylafax to talk to each other. I have no doubt that someone has had this type of issue before but I can't find anything useful in the archives or on Google. Under RH9, with chan_capi 7.1, Asterisk 1.2.24, with an AVI Fritz ISDN2e BRI card all working perfectly... I've downloaded and

Can anyone suggest where I might begin looking for an answer please? I have just installed a TDM400P (2x FXS and 1x FXO modules installed) The first problem is that it does not seem to be able to detect if the remote party has hung up when a call comes through on the FXO. For example, if someone calls in, and then hangs up at any time after it starts ringing, Asterisk carries on as though the

I have a really baffling problem. A couple of months ago I purchased a pair of GrandStream GSX-2000 phones for use with Asterisk. At first all was well. But recently I've noticed terrible sound quality problems. Basically the sound will "glitch" or stutter randomly from time to time. Now, what is interesting is that this happens even with the phone totally disconnected from any

I've somehow managed to battle may way through hinting issues with type=peer type=friend and various other oddities and now have presence working correctly on my Polycom 600 and Grandstream GXP-2000 phones. However, on the Polycom I have to press the Buddies softkey in order to see if an extension with a hints priority is in use or not. I've spent all day going through google and my

(I hope this isn't html - Thunderbird is so annoying) I'm new to using hints/subscriptions on * so please be patient with me. I have two * systems in different geographic locations, connected via IAX Location1 has a Polycom 600 and a GXP-2000 phone Location 2 has a single GXP-2000. With the latest GS firmware, at Location1 I've managed to get an LED to light up on the GS phone

I'm having some mysterious problems installing 1.6.2.10 on Centos 4.8 (totally up to date). I can't see anything on Google or the list regarding this issue, which I find a bit odd considering 1.6.2.10 was released a few days ago. I'm therefore assuming there's something weird about my setup, even though there shouldn't be! I had no problems with 1.6.2.7 or any other release.

I've having a big problem after having upgraded to 1.2.4 and chan_capi-cm 0.6.4 When making outgoing calls I don't seem to have any control over the CLI that is presented to the called party -- it can be any one of the MSNs allocated to the line, allocated on what seems to be a random basis. This is on a BT Business Highway line (which is essentially an ISDN2e line with two built-in

Hello I want to setup an Asterisk in several offices with 4 BRI ISDN. I am looking for recommendations on hardware. Criteria would be ease of setup, reliability and cost. The Eicon 4 BRI cards seem fairly pricey. Shame Digium don't do a ISDN BRI card. Angus -------------- next part -------------- An HTML attachment was scrubbed... URL:

A picture is worth a thousand words: http://dl.eve-files.com/media/corp/aurix/eve_premium_wine_0.9.61_1.png The black columns are supposed to be spot lights on the ship in the middle. I haven't tried eve premium before 0.9.60, however, people claim that it didn't have this problem in 0.9.58. Here is a link to the thread in eve online:

Hi I have installed 2 x Eicon BRI ISDN cards into a Suse 9.2 server. We can use all 4 lines for out going calls fine, but on incoming we can only use 2. On calling in using the main msn, the 3rd line gives a an engaged signal. I have unplugged 1 of the cards, and the other card takes the 2 calls. I then swapped this around, and this also works fine. But when using both cards, we can only use

Looking for folks experiences with ISDN BRI cards in the UK ... what's good and what's bad and any gotchas. Thx -- David Gurr Congruity Ltd. Hemel Hempstead UK

I am going to try and use a passive AVM fritz BRI card for my * setup.. Here is the thing.. I need to order my BRI from BT.. The service that looks to be the one to use is what they call ISDN 2e becasue this has the option to setup hunt groups across multiple ISDN2e lines so I could add another line later to get 4 channels.. According to the BT website in order to use the hunt grouping across

I have an MGE Ellipse Premium 1200 that I connected to my server using its USB cable. Nut seems to be working fine. I've done a power down test and it worked and came back up when the UPS had power again. I'm using the newhidups driver and the USB cable. The problem I'm having is that if I boot with the cable connected newhidups says it can't find the UPS. If I unplug and plug in

My new MGE Ellipse Premium 1200 is now working fine. I've tested pulling the plug and the computer shuts down properly and comes back up when I replug. The only strange behaviour is that when I put the power back on the battery shows as being at 86%. If it was at 86% it should have lasted longer. Is there any calibration step I can do? The only commands the ups seems to support are: $ upscmd

Hi, I was able to install MS Office Premium version on ubuntu 8.04 LTS (wine 0.9.59) Everytime I rum Word, Excel or Frontpage i get the installation dialog box, asking me for the Product key, after entering the key the dialog disapperas and the application shutsdown. Please help, how do I rectify the matter. Also is it legal to install MS Office on Ubuntu ?? thanks a

Been using mpg123 for moh for the last two years or so. However, when I have * config errors, often times get a endless stream of console messages and need to kill the two mpg123 processes. Is there an alternative to mpg123 that eliminates that issue? I see references in musiconhold.conf relative to madplay, native file format, asterisk-addons, etc. Not sure why the asterisk-addon approach

Hi, I have installed in suse 9.3 and ellipse premium 500 usb a psp 3.0 with yast2 and versions: nut-2.0.2-4 mgeups-psp-3.0.0-3 the first time that I launch psp it seems to contact the UPS and you can make changes to the parameters and all seems ok. If you make a reboot the psp hangs up and if you try /etc/init.d/ups it fails: Starting service NUT: -> Starting UPS driver: Network UPS Tools -

Hello all, I've got an MGE Pulsar Ellipse Premium 800 powering a couple of FreeBSD systems. Driver used is mge-shut, I don't know what the new mge-shut driver offers, but I follow the "if it works, don't fix it" dogma here. :) I also had a nut server installed on the master, with the /usr/local/etc/rc.d/nut script slightly modified to include a couple of upsrw commands

Hi people. I'm trying to config a: MGE ELISE PREMIUM 1200 NT 02 Serial Nr. 92HE04008 With its serial cable into /dev/ttyS0. I had configured ups.conf, with no luck. Here is my ups.conf: [upscura] driver = mge-shut port = /dev/ttyS0 desc = "UPS" The permissions into /dev/ttyS?: crw------- 1 nut nut 4, 64 mar 8 18:43 /dev/ttyS0 crw------- 1 nut nut 4, 65 mar 8 18:42

Signed-off-by: Faris Alsalama <farisbenbrahem at gmail.com> --- drivers/gpu/drm/nouveau/nouveau_backlight.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c index 89eb460..dd1cc9b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_backlight.c +++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c @@ -232,6