similar to: Nortel BCM and Asterisk as SIP Extension

Dear List, Need to know if anyone on this list has had any experience with using the Nortel BCM 50 for Call Account Reporting using an IP connection to a Linux / Asterisk interface? Presently, I have a BCM 50 installed that uses a local Lenova Small Form Factor PC with a windows XP / os that quit reporting because of a up-grade to the Nortel reporting software. Nortel support is now telling

Has anyone fed a Nortel BCM from Asterisk? I'm interested in switching our company over, but don't want to replace all the handsets in one fell swoop. I imagine some of the PRI cards can "emulate" a switch? I'd still like to pass CallerID into the Nortel, etc but all the external traffic would be VOIP, not TDM.

I am looking at setting up the following configuration and any help/input/comments before signing the PRI contracts will be greatly appreciated. PRI Tampa PRI Sarasota PRI <--> Nortel BCM-->Asterisk<------------------>Asterisk<---> I would like to link the Nortel BCM to * using the a digital trunk card. The BCM will

I've been trying to look up information on upgrading firmware on a nortel i2004 ip phone. I have this phone leftover from a trial, and it's supposed to be upgradable to current firmwares. Since I also run a DMS I was able to login to nortel's site and get all the firmware files, but All the NTP's regarding firmware upgrading these are how to tell you BCM to send the file to it.

Hello, is it possible to connect a Nortel i2004, (i2002) IP Phone to an * PBX? I have seen on the net that there should be an SIP firmware aviable for the phone, anyone an idea where to get it? Because orginally they use a own protocol to connect to an Meridian, BCM or CSE1K. Another idea is to write a module for * that can handle this protocol. bye SLiME

I'm completely new to asterisk and while we have access to Nortel experts none of them know asterisk and since I'm the network guy I've been lumped with this. This is what I'm trying to accomplish We have a CS1000 that's sip capable. I want to be able to connect an Asterisk box to the cs1000 via sip as an IVR, so I can pass a call off to asterisk, go through some IVR menus

I'm looking to build a VoIP solution for 100+ service vehicles that have WiFi hot spots installed (with cellular uplinks). Currently we are trying out Skype wireless handselts and Majick Jack. I'd also like to consider an Open Source solution that can bring the calls back to our data center [possibly integrated without our existing BCM 3.x VoIP PBX]. For hardware someone on the IRC

Does anyone know if Asterisk can function as a voicemail system for a Nortel Option 11 PBX? We will be connecting Asterisk to act as an IVR before sending calls to the Nortel and as a Voicemail system in case the user does not answer. That part is trivial, the only problem we have is that the customer wants the Voicemail light on the Nortel phones to light up when a user gets a new message.

Hi, I'm trying to connect * to Nortel BCM 50, This PBX use H.323 v3 to interface with other PBX. The port use to connect is TCP 1720 but I can't configure this port on my * box. I'm using a H.323.conf file sample to activate the port but the * isn't listening there. Somebody have any idea or tip? This is mi H.323.conf [general] port = 1720 bindaddr =

I currrently have Asterisk 1.2.8 with a TE110P Zaptel card tied to our Nortal DMS-10 switch via T1. This T1 trunk is configured for Feature Group D MF. The purpose of this is for LD delivery to a VoIP LD provider as a LD choice for our customers off of the DMS-10. When I sieze a channel on the zaptel, I get a spill of digits from the switch that is the called number, and I can see that in

Greg White,. I have noted your comment on some documentation found on the web, "I have successfully (and repeatedly) used Nortel VPN client on a NATed host through a FreeBSD gateway." Currently i have the same problem with a Nortel BCM Running M$ Windows VPN, the BCM sit's behind a FreeBSD Firewall / NATD. ---- Network ---- ADSL Modem | FreeBSD Server / Gateway / HTTP etc.

Hello All, ?I have a Dell Vostro 1550 laptop. i3 core, 64 bit, 8gb ram etc etc. I had a nic interface, but some how the wired nic is not working. So I am trying to use the BCM 4313 wireless chip, of this system, to connect to the internet. ?I have Cent os 6.5 (64 bit) installed with the required libraries and kernel sources, headers etc. I got the source code of the driver,

Is anybody using Nortel IP Phone? I have (second hand) Nortel i2002 phone and when it boots I get: DHCP server unreachable F/W version: 0604D9C My setting: DHCP? [0-No, 1-Yes]: 1 DHCP: 0-Full, 1-Partial: 0 Can any body suggest how to troubleshoot it? -- #Joseph GPG KeyID: ED0E1FB7

How do I get asterisk to populate the "Calling Party Number" field in an H.323 call? I have asterisk configured to accept a SIP call and connect it to an H.323 IVR system. The call goes through, but the caller id is put in the "Display" field rather than the "Calling Party Number" field. -----Original Message----- From: Skuse, Phil [mailto:Phil.Skuse@vicorp.com]

Hello, I am using a Cisco-2,811 as a gateway between the Asterisk PBX and our Nortel TX-1 university's PBX. It is working but no names are exchanged. From the debug mode I see that the Cisco sends the display name (which does not appear on the Nortel's phones) and the Nortel does not bother to send it at all. I recall that when I had a pilot with Cisco CCM two years ago we had to set

As a follow-up, I have traced the PRI connection and discovered that calls hung up by a local BCM voice station (analog, digital, whatever) send a disconnect with a clear cause of 1 (Number not assigned) instead of a normal clear cause of 16. Calls forwarded through the BCM disconnect with the normal clear cause. I have kludged up a fix to change all clear causes below 2 to 16 (I placed

Well I am entering into a realm that I don't know. 3 sites with Asterisk 1 site with Nortel Asterisk/Sip calls working fine between the 3 sites. Asterisk to Nortel set calls working fine. (call comes from asterisk to nortel and rings telephone, people answer and talk happens, hangup call clears) Nortel to Asterisk. Set on Nortel gets a busy signal. Any suggestions on what to look

We have an h.323 based IVR platform. When we make a call to it using an h.323 phone, it can see the callers number (ANI), but when we make a call to it via asterisk, the call goes through OK, but we don't get the number. How can I make this work? h323.conf ======= [general] port = 1720 bindaddr = 0.0.0.0 disallow=all allow=alaw dtmfmode=inband [ivr] type=h323 context=default extensions.conf

Author: cjj Repository: /hg/zfs-crypto/gate Revision: a58472277959c34c37827af84da191ceba990899 Log message: 6398779 Need to reduce address limits for devices downstream of a BCM 5708/5714/5715 bridge Files: create: usr/src/uts/sparc/pxb_bcm/Makefile update: usr/src/cmd/pcidr/etc/SUNW,EC_dr,ESC_dr_req,sysevent.conf update: usr/src/pkgdefs/SUNWckr/prototype_sparc update:

I am using asterisk 1.4.32 and wish to connect using SIP to a nortel 1000 switch with the ability to have 90 calls at a one time outgoing or incoming. the nortel reseller is asking me what to do. I dont know nortel at all. I thought I just needed a "SIP trunk and IP address of the their server and an account name, and provide her my IP address". They didn't know what to do with