similar to: Random Zap port going crazy When channel released after a flash.

Hi all, Have been experimenting with agents and queues instead of placing calls direct to a user's phone extension, but I've run into problems with calls to both the agent and the extension which creates a zombie and double records calls abandoned etc. We're using a unique queue for each agent (only a handful of users) to try and get some agent/queue information to see what the

hello everybody, one of our customers which wants a soft transfer between his old pbx to asterisk and sip. the setup is as follows: telco <---pri---> asterisk <---pri---> legacy pbx everything is fine exept that when dialling from the legacy pbx it takes about 3 seconds before the asterisk start to dial. where does this delay come from? has it to do with

Hi, I'm currently running CVS-HEAD 2005-09-03 I do plan to upgrade to the newest version, but need to do some testing with it first. In the mean time... does anyone know what these messages below are about? I've never seen it before, but when it happened it locked Asterisk up pretty good. Feb 10 10:16:51 DEBUG[14917] chan_zap.c: Echo cancellation already on Feb 10 10:16:57

I tried to add a couple of SIP phones (polycom 601s) to my existing asterisk installation. I can successfully make a call from the SIP phone to any other phone (inside or outside), but I can not make any calls to a SIP phone. Attached are the pertinent parts of sip.conf and extensions.conf. The log starts off normal with: Mar 26 09:51:15 DEBUG[4885] chan_zap.c: DTMF digit: 2 on Zap/55-1 Mar

Hi everybody, Well, I've finally got asterisk to to talk nicely with my Intertel pbx. Currently there is a outside T1 line (e&m wink start, esf, b8zs) connected to asterisk, and then asterisk connected similarly to my Intertel pbx. For right now all asterisk is doing is passing calls between the two. When I call out from the pbx, I can connect perfectly to the outside world. When I

Hello, I have a system with two cards: a HFC-PCI ISDN and a TDM21B (2 FXO and 1 FXS), running Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1l with freePBX beta5 dialplan. I have connected an analog phone to TDM FXS port, but when I pickup the phone to make a call, Asterisk "hangs up" the call. Let me explain: In another system, when I pickup the phone, Asterisk give me tone to dial: >---

Problem: *Call* *waiting* comes in, I press flash to answer it, and the first caller gets disconnected after 3 seconds. This is all ZAP - no VOIP. System: Analog stations and trunks running on a pair of TDM400's. It does NOT have * call* *waiting* from the phone company, and I have enabled it in all my conf files. The trunks are set to FXSKS and the stations are FXOKS. I am not using *call*

Hello to all, I post again (last time subject: Line drops strange problem(got event On hook) because i have caught in debug a situation where i get a call and the line drops and i get a call from the same caller and the line works well and the call normally closes by both parties. The only differences i find are underlined. If someone can understand the reason why the line drops from the debug

Hi, If I have an AGI script that calls user A and then calls user B and connects them... it seems to work fine (for accounting) if I call a local call (out my PRI).. however if I go out my IAX... the CDR terminates the long distance call after 3 seconds (after the IAX trunk picks up).. and what ends up in the CDR is a time .. but it's FROM (src) the long distance call to my local extension..

Hello, my configuration is the following: a TDM400P board with an fxs and fxo daughter boards on it. I thus connect a fax to my FXS port, after having verified that this port was correctly functioning. For this, I had tried before with a simple phone, and with some basic voicemail exten scripts. Here is my simple dialplan for my fax reception: exten => 300,1,Ringing() exten =>

Hello to all, I have a strange problem with my asterisk. Line drops while i am in a call and without a reason.The line drops no matter if it is a incoming or outgoing call and it happen while i am talking on the phone (no silence detection problem). I tried to debug the situation and the only strange thing is the "got event On hook" (i guess..). I am thinking that it is a problem

Good Morning, I've recently gotten Asterisk installed and configured our IVR using FreePBX. Things seem to be going well except a few of our inbound callers are ending up in the wrong place when trying to connect to a specific extension. The example I had this morning was someone trying to call extension 212 and getting connected to the Sales queue which is option 2 on the IVR. I looked in

Hi I have 3FXO trunks called ZAP-25,ZAP-26 and ZAP-28 and T1 Channnel bank I get this deadlock problem when 2 incoming call from FXO(Here ZAP-28 and then ZAP-26) wants to dial same channel (Here ZAP-1). In this senario ZAP-1 first answer ZAP-28 and thne ZAP-26 wants to call ZAP-1 but it time out and goto voicemail after that ZAP-1 try to reach ZAP-26 call by puting ZAP-28 on HOLD During

After a power interruption, asterisk doesn't seem to be routing calls and there seems to be a premature timeout and hangups occurring. I am clueless where to look. Can someone in the know, look at the following log and enlighten me if there's a problem, or if it looks normal. From the calling phone, it keeps ringing as if never picked up. Thanks soo much. -braman

Hi, I've noticed that a small but meaningful quota of calls from my Alcatel PBX to Asterisk are failing. This does not always happen and it is not easily reproducible but on high traffic I do get a large number of cases. Example: Alcatel PBX extension 7085 calls Asterisk PBX extension 6145 over a PRI E1 link. I see this in the Asterisk log: Dec 14 14:10:31 VERBOSE[11378] logger.c: --

I am having an issue where outbound external calls. Calls made using an analog line (connected to an FXS) route correctly out the trunk (connected to an FXO). However, when I make a similar outbound call using a SIP phone the analog phone connected to the FXS rings. I was having this problem intermittently with a manual asterisk install -- a reboot would fix the problem. I am now giving

I have a plain POTS line coming into FXO in a Digium card, this is developers kit card with 1 FXO and 1 FXS. The latency is very high, in that, it picks up after 8 rings. I don't know what I can tune to reduce to 2 or 3 rings. If it's of any help , I am posting a section of the log : ==== Apr 30 10:26:50 DEBUG[3050] manager.c: Manager received command 'Command' Apr 30

> Post your extensions.conf and what's on the CLI (asterisk -r) As requested: # cat /etc/asterisk/extensions.conf [incoming] exten => s,1,Answer() exten => s,n,NoOp(CallerID is ${CALLERID}) exten => s,n,NoOp(DID is ${DNID}) exten => s,n,Background(enter-ext-of-person) exten => 1625,1,Playback(digits/1) exten => 1625,n,Goto(digits/1) exten => i,1,NoOp(CallerID is

We have an asterisk box with the following configuration: - AMD Athlon XP 2400+ - 512 MB RAM - SUSE Linux 10.1 - a Digium card TDM400P with 3 FXO - another Digium card TDM400P with 4 FXS - asterisk 1.2.7.1 - zaptel 1.2.4 I already checked that those cards aren't sharing interrupts (by cat /proc/interrupts): 0: 14119786 XT-PIC timer 1: 10 XT-PIC i8042 2:

I am new to Asterisk and the protocol/language complex world of VoIp and PBX. But I have a dedicated machine running A@H 2.8, a single TDM400P with one FXS module card connected to a standard analog phone. The second card is an X100P connected to my analog PSTN phone line. I also have Grandsteam IP phone plugged into the network and a couple of x-lite SIP softphones. I can make outgoing calls on