similar to: Zap not installing

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greets all sorry for the posting but this one has me confused. I compiled Zaptel and am experiencing something strange. I followed the instructions on README.udevs to the tee, set permissions, etc. and I'm confused as to what gives. Zaptel compiled without a problem but no device was made.... [beta@staging ]# uname -a Linux xxx.xxx

hi there I'm trying to get asterisk going on gentoo 2005.1 I'm just getting my feet wet so I thought I would just stick with the stable portage packages. Right now that's asterisk 1.0.8 I emerge asterisk with the following make.conf file: CFLAGS="-O2 -mcpu=i686" CHOST="i386-pc-linux-gnu" CXXFLAGS="${CFLAGS}" USE="-gtk -gnome -qt -kde -dvd alsa

Hi, I'm using zaptel-1.2.22.1 with asterisk-1.2.10 and following steps to make zaptel working... OS is gentoo linux 2006.1 Hardware: --------- 0000:05:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device 8085:0003 Flags: bus master, medium devsel, latency 32, IRQ 22 I/O ports at b400 Memory at ff900000

I have had a TDM400 with 2 FXO and 2 FXS working for ages (>12 months). It has stopped working. All four green lights are still lit. I have rebuilt zaptel and asterisk and restarted but the problem persists. /sbin/ztcfg -vvvv Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03:

Just as an FYI.... I have a configuration suppestion to pass along... If you have: Fedora Core 3 Asterisk 1.0.x Digium Wildcard T100P PCI Card -------------------------------- In order to get the card to work you MUST edit /etc/udev/rules.d/50-udev.rules Goto the end of the file and add....... KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

When I try to start up zaptel, whilst running ztcfg, I get the following error: Jan 1 10:48:18 bu ztcfg: ZT_CHANCONFIG failed on channel 2: No such device or address (6) My /etc/zaptel.conf is: fxsks=1 fxoks=2 loadzone = au defaultzone=au Channel 1 is a X101P card connected to the PSTN and channel 2 is a S100U box driving an analogue phone. The zaptel kernel module gets loaded OK as does the

> -----Original Message----- > From: Tzafrir Cohen [mailto:tzafrir.cohen@xorcom.com] > Sent: Wednesday, October 25, 2006 10:18 AM > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] Re: Meetme... No channel type registered > for'zap' > > > On Wed, Oct 25, 2006 at 10:06:02AM -0600, Douglas Garstang wrote: > > > -----Original

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

It's a udev configuration. Read UDEV.txt, or, read the AMP wiki http://aussievoip.com for a step-by-step. --Rob -----Original Message----- From: asterisk-users-bounces@lists.digium.com on behalf of Jachin Rupe Sent: Wed 7/09/2005 9:16 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] /dev/zap* is not showing up (gentoo, portage,asterisk 1.0.8 hi

Hi, I am sorry if this message has been reposted, but for some reason I am having problems with posting it. I configured asterisk and zaptel modules with fedora2. I want to be able to load the zaptel wcfxo and wcfxs modules. For now I will use only the Wildcard TDM400P card. I am able to load the modules but I cant configure them using ztcfg or zttool because the tools are compiled to use the

I installed TDM400P and X100P pci cards in a system running mandrake 10.1 official, kernel 2.6.8.1-12mdksmp. I can compile zaptel, libpri, asterisk and modprobe (zaptel, wcfxs, wcfxo) without errors. Except that running ztcfg and asterisk fails. [root@asterisk asterisk]# ztcfg Notice: Configuration file is /etc/zaptel.conf line 3: Unable to open master device '/dev/zap/ctl'

>rom: "Jose Hernandez" <jfhernandez_01@verizon.net> >Subject: RE: [Asterisk-Users] Unable to open master device > '/dev/zap/ctl' > >If you are using udev you will get a message during compile suggesting to >read README.udev, I did not pay attention to this message. > >Anyways.. I did not get the error after creating a udev rules file in

Trying to setup asterisk and zaptel on a Fedora Core 3. Its all working after reading up on udev but I still get errors. [root@redhat ~]# ztcfg -vvvvv Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 2 channels configured. Notice: Configuration file is /etc/zaptel.conf line 4: Unable to

Of course I am not a kernel expert, so .. please be patient. I am investigating on my zaptel/zapata problem. As the main error message asterisk quits on mentions <'/dev/zap/channel': No such file or directory> I went peeking over there. [Asterisk Verbose Error Mar 13 20:43:35 WARNING[5779]: chan_zap.c:763 zt_open: Unable to open '/ dev/zap/channel': No such file or

Hi, I had problems described in another thread so went from a start, but now have problems when loading qozap module. I get : # insmod qozap.ko ports=9 insmod: error inserting 'qozap.ko': -1 Unknown symbol in module and in /var/log/messages: module qozap unsupported by SUSE/Novell, tainting kernel. qozap: disagrees about version of symbol zt_receive qozap: Unknown symbol zt_receive

I am using asterisk version 1.2.6 with Zaptel version 1.2.5. I have a POTs line coming into a Digium TDM01B. It appears to not be getting CID at all. If I hook up a POTS phone to the line CID comes through fine. Inbound and outbound calls work fine but there is just no CID on inbound for this channel.The incoming route for the channel is Zaptel Channel 0. No DID or CID settings applied. My IP

zaptel compiles fine (make linux26) but when I modprobe ztdummy I get the follow error. [root@localhost zaptel]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected FATAL: Error running install command for ztdummy System info: Linux localhost.localdomain 2.6.9-5.0.5.ELsmp #1 SMP Thu May 19 19:24:44

Does anyone out there have a recommendation for tools that will monitor the quality of VoIP systems? I am looking for jitter and MOS monitoring. I have a custom Nagios plugin that is alerting me if the jitter jumps out of a 20ms but I am looking for a little more detail. I would not be against writing something in Perl for Nagios to do but I don't really know where to start on measuring jitter

I've been testing * on FC3. I have everything compiled and installed. However, when I do 'modprobe wcfxo' (I have an X100P clone), I get the following in /var/log/messages: Nov 24 10:23:40 jfd wait_for_sysfs[3366]: either wait_for_sysfs (udev 039) needs an update to handle the device '/class/zaptel/zaptimer' properly (no device symlink) or the sysfs-support of your

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3115 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060323/c0928576/smime.bin