similar to: Unable to make hints function properly

Can anyone help with BLF for Snom 300s ? (Asterisk 1.4.10.1) I've setup hints for a couple of Snom 300's but Asterisk doesn't send Extension Changed messages to subscribed phones unless the second 'line' button is used (I've tried Snom's version 6 and 7 and two difference 300s). On the Asterisk Console I don't see any message when picking up a Snom 300 and dialing

I have a system running Asterisk 11.2.1 that has had a couple calls between internal extensions get "stuck open". I didn't catch the verbose log for the first one, since I generally don't verbosely log to file, but the second one shows that the call that got stuck was dialed, but the caller hung up before the called device answered. This server is running a hotdesking

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

Version - Asterisk SVN-trunk-r12793M (1.2.4) I have 4 Grandstream GXP 2000 phones configured. However at the moment, I have had to disable BLF, Hints, and Call Limiting due to an extremely annoying bug which seems to make the phones channels "lock" in busy after a call has been hungup. If I do a show hints after say extension 200 has hung up I get the following -= Registered

Hi all, There are a lot of posts around the web about my question; unfortunately I have not been able to get any of the solutions to work. I'm using Asterisk 1.6.2.8 under CentOS 5.5. I'm trying to get call pickup working for the secretaries that monitor their bosses' phones. The BLF and the speed dial works great on the Linksys phones. Call pickup is the problem. My features.conf

Hello list, I read this in sip.conf : notifyringing = no ; Control whether subscriptions already INUSE get sent RINGING when another call is sent (default: yes) What does this mean ?! Does this mean that when I mark this as "yes", a phone that already has taken a call will be send a second and third call ?! I want that if a phone is in use (calling), the phone does not

I am working on Polycom IP601 console with expansion module. I want to put on the BLF (busy lamp field) feature on all the contact/speed dial names I put on the console but I could not get it to work. *CLI> core show version Asterisk 1.4.13 built by root @ hostname on a i686 running Linux on 2007-11-20 05:26:15 UTC *CLI> sip show subscriptions Peer User Call ID

In testing Asterisk 11, I've found that Asterisk doesn't seem to be sending BLF updates to SIP peers that have subscribed to a hint looking at a Custom device if that Custom device state is RINGING or RING_INUSE. All other states seem to be working correctly. The hint section of the dialplan is: [hints] exten => _3XX,hint,Custom:${EXTEN} Console shows the following for core show

Hi, I need to make use of BLF feature on Aastra 6757i phones but its an Asterisk 1.4 using realtime architecture. Extensions are defined in realtime database and dial plan is in AEL. I am able to correctly setup hints in the dialplan, but they don't work. Did some research and found out that hints don't work work with realtime extensions. Is there any work around? On voip-info I read

Have an interesting problem, Using asterisk 1.6.0.1 Phone A receives voicemail, dials into VoiceMailMain, Phone B's BLF for A lights up. Phone A deletes the voicemail but still in VoiceMailMain, Phone B's BLF for A goes off. Phone A hang's up, Phone B's BLF for A goes on. From this point forward the Phone B's BLF for A seems to always show the opposite of what it

Man, I really feel stupid, but after banging my head on a brick wall for several hours ... I need help! I've gotten the BLF to work on my shiny new GXP2010. The GXP is exten 5707, and I've got an xlite on 5608. When I make a call from an outside line, I dial SIP/5608. The little blinky light on the GXP that's monitoring 5608 goes, well, "blink blink". :) I then press

Hi all A quick question about busy lamps I have lamps working 'sort-of' on my GXP2000 lamps flash with ringing and go solid red when call gets answered but stay green when a call is made from the extension. Setup is Ext 200, 201, 202, each monitor the other two when 200 calls 202 - the BLF on 200 and 201 flash red - when 202 answers both 200 and 201 show BLF for 200 as red but

Polycom Phones (updated for 3.2.X firmware with asterisk 1.6.1 Jan/2010) With SIP 3.2.X firmware (available on the Polycom download site) and Asterisk 1.6.1, Polycom phones now support a full featured BLF showing statuses of Ringing, Inuse and Online and one touch directed call pickup. On the asterisk side all that needs to be done is to add a hint to the extension and enable directed pickup.

Copying to asterisk-users, as it's of use there too. I copied this code years ago from the net, it may have been modified since... This however is only used by managers, as it allows the manager to log a user in and out. For agent logged in/out status: where 8501 is the queue number and 8512 is the agent's extension, and SIP0001 is the agent's device. in extensions.conf

I am trying to get something working that is just not doing quite what I want. It may not be possible, but I figured it was worth asking about. The details: Asterisk 11.6.0 Polycom SoundPoint IP650 phones running 4.03 firmware. We have a queue with 4 phones in it. ringinuse is set to yes and the stategy is ringall. In sip.conf, we have notifyringing set to yes as well. Asterisk is sending

I have 3 phones, SIP/3, SIP/6 and SIP/9 SIP/3 subscribes on hint on SIP/9 Phone 6 calls phone 9, blf on phone 3 flashes until 9 picks up, then it is steady red. That's correct. But when 9 hangs up the hint goes to "InUse&Ringing", the light on 3 is still flashing. It keeps flashing until somebody calls 9 and hangs up again. -- Executing [9 at local:1]

Hello, If the phone of my colleague rings, I can see this with BLF-lamps on my Snom IP-phone. I would also like to see *_who_* is calling. I would like to see the external number on my screen so I can choose whether to pickup the call with BLF. Therefore I have in sip.conf : notifycid = yes With this setting on, I see on my screen : 10 --> 10 10 is the internal extension of my colleague.

I see a lot of these on an otherwise idle Asterisk 1.6.0.15: Extension Changed 773[Hints] new state Ringing for Notify User 792-00041327d17e-1. Then a little while later it changes to InUse or Idle, completely randomly. It happens for many different combinations of phones and watchers. There are no calls being made, so I can think of no reason why this happens. Obviously it wreaks havoc with

I am interested in IMAP Voicemail storage for some of my customers. Does anyone know of any vendors of asterisk appliances (physical PBXs) that provide this as a "standard feature" (or an optional standard feature)? Ultimately, I'd like to be able to have a single point of accountability for the system as a whole. I would like an intuitive & powerful configuration GUI (such as

supported, beside Idle, On call and Ringing ? Can we expect this list to match DEVICE_STATE's one (UNKNOWN | NOT_INUSE | INUSE | BUSY | INVALID | UNAVAILABLE | RINGING | RINGINUSE | ONHOLD) > Might be worth seeing if other phones do the same. > > S > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by