similar to: Updated ipsec-tools fixes vulnerabilities in racoon (the ISAKMP daemon)

As was accidently posted here earlier by Ralf :-), you should be aware of this issue: http://vuxml.freebsd.org/d8769838-8814-11d8-90d1-0020ed76ef5a.html racoon fails to verify signature during Phase 1 Affected packages racoon < 20040407b Details VuXML ID d8769838-8814-11d8-90d1-0020ed76ef5a Discovery 2004-04-05 Entry 2004-04-07 Ralf Spenneberg discovered a serious

I have no idea whatsoever as to why racoon/IKE does not work here. I've tried various how-to documents but found nothing that works for me. Gateway (10.0.0.1) running 4.9-stable. Laptop (10.0.0.10) running 5.2.1-release. Both running racoon-20040408a On the gateway 10.0.0.1 # cat /etc/ipsec.conf add 10.0.0.1 10.0.0.10 esp 691 -E rijndael-cbc "1234567890123456" -A hmac-sha1

Hi all. The IPSec part of the LARTC howto is great, but I''ve hit a problem in 7.3. IPSEC tunnels. The example given is for manual keying: add 10.0.0.216 10.0.0.11 esp 34501 -m tunnel -E 3des-cbc "123456789012123456789012"; How does one setup "tunnel mode" using racoon? Trying to setup an ipsec tunnel between two subnets: 10.10.42.0/24 and 10.1.1.0/24 using a

Hello, I have given myself quite the headache trying to make this VPN work correctly. I am attempting to use racoon to establish keys and construct an encrypted tunnel between one host(A.A.A.A) with a routable IP address and another that has a private address(10.0.0.2) with a cable modem(B.B.B.B) forwarding all ports to the private address(10.0.0.2). Here is a quick topographic dipiction of the

I am attempting to create an ipsec tunnel between two CentOS 5.1 systems, network-to-network with two different 192.168.xxx.0/24 LAN segments. I have gone through the documentation on the centos web site, and have the machines to the point where the /var/log/messages show ``IPsec-SA established'' on both machines after runnig ``ifup ipsec0'' (same ipsec0 on each machine). IP

Hi, I am trying to setup an IPSEC transport between a Windows 2000 box and a FreeBSD server for a customer... Both systems are on live public IP's and packets are not filtered by any intermediate systems or firewalls/routers in between. I have the following setup: Windows 2000 box: 1.1.1.2 FreeBSD Server: 2.2.2.3 (The actual IP's have been changed to above to protect the innocent..)

Hi, I have been using IPsec to communicate between a laptop that tracks -stable and a Linksys BEFVP41 router. I only use it infrequently, but it's been working great. My setup is as described in http://grapeape.alerce.com/linksys-ipsec/article.html (which I am planning to submit to the handbook when it's done). I'm no longer able to make an ipsec connection, and I can't put my

Hi all, I am trying to establish a vpn tunnel between one CentOS5 IPSec server and a roadwarrior client, CentOS5 too. Roadwarrior use ipsec-tools version 0.6.5-8 (that comes with CentOS5) and server uses version 0.7 (downloaded from ipsec-tools website). My server configuration is: path include "/etc/racoon"; path certificate "/etc/racoon/certs"; path pre_shared_key

Buf ... Solved. Problem was that /etc/pam.d/racoon doesn't exists (I found this tip on NetBSD ipsec pages). Simply I have copied /etc/pam.d/passwd to /etc/pam.d/racoon and now all works as expected. Many thanks for your help Ross. Ross S. W. Walker wrote: > > I think it might just use another one like /etc/pam.d/remote > cause I audited the package and it wasn't there.

Hi Running racoon on a Freebsd-4.11 machine gives a kernel panic. I am using the racoon from ports directory which comes with the freebsd installation. Steps followed are as shown below: racoon -f /usr/local/etc/racoon/raccon.conf setkey -f ipsec.conf ping -c 1 <ip_of_the_other_gw> The ping will lead into a crash. The crash dump looks like for th ping packet it

Hi everyone, I wrote up a post on the FreeBSD forums about the issue I am having. It's rather long so I am providing a link to it here: http://forums.freebsd.org/showthread.php?t=39595 In summary, it seems that when the packets are routed in to the gateway from local network hosts, the src and dst addresses are changed to the public IPs of the tunnel -- at least from the perspective of the

hello i am trying to set up ipsec in my network, for now just between two hosts, using to use AH & ESP in tunnel mode to get all of packet encrypted. keys are negotiated with racoon. mayby using tunnel mode in this case can seems strange, but i know what i am doing. after setting up everything i have done few tests with ping & tcpdump. but the results are very suprising. bellow is what i

Centos 5 is still soon end of life. Using it as ipsec gateway is .. Eero 21.3.2016 7.25 ip. "Mike - st257" <silvertip257 at gmail.com> kirjoitti: > On Mon, Mar 21, 2016 at 1:17 PM, Mike - st257 <silvertip257 at gmail.com> > wrote: > > > I second Eero's comment, use a new IPSec daemon. > > > > Openswan was forked and became Libreswan. Paul, now

I am trying to get a tunnel from a cisco 1760 with IOS 12.2.15.t13 to a freebsd 4.9 install with racoon. I have package version freebsd-20040408a and internal version 20001216 in my log file. I posted the full racoon and cisco log below my configs. Racoon keeps saying: 2004-07-26 16:24:03: DEBUG: isakmp.c:2295:isakmp_printpacket(): begin. 2004-07-26 16:24:03: DEBUG:

On Mon, Mar 21, 2016 at 1:17 PM, Mike - st257 <silvertip257 at gmail.com> wrote: > I second Eero's comment, use a new IPSec daemon. > > Openswan was forked and became Libreswan. Paul, now a RH employee, was a > main developer for the Openswan project before he and others created the > Libreswan fork. > https://libreswan.org/ > > EL6 has Openswan > EL7 has

Will ask my boss :) We are hosted on memset so not so easy to update Thanks On 21 March 2016 at 17:36, Eero Volotinen <eero.volotinen at iki.fi> wrote: > Centos 5 is still soon end of life. Using it as ipsec gateway is .. > > Eero > 21.3.2016 7.25 ip. "Mike - st257" <silvertip257 at gmail.com> kirjoitti: > >> On Mon, Mar 21, 2016 at 1:17 PM, Mike -

To be fair its not highly sensitive info we are dealing with. -----Original Message----- From: "Eero Volotinen" <eero.volotinen at iki.fi> Sent: ?21/?03/?2016 17:51 To: "CentOS mailing list" <centos at centos.org> Subject: Re: [CentOS] IPSec multiple VPN setups Err. Sounds like security nightmare. 21.3.2016 7.47 ip. "Glenn Pierce" <glennpierce at

Hi, When a IPSec tunnel is established between two peers, I understand that the "normal" situation is to have in a given moment two SAs, one for each direction of the tunnel. However, in one of my tunnels (peer P1 running GNU/Linux with setkey and racoon; peer P2 is a Cisco router) there is a large number (around 19) of SAs established (this has been observed in P1 with

Are there any tools to decode encrypted part of isakmp provided that identities of both peers are known to me and that I am able to observe the whole exchange ? -- Andriy Gapon

Err. Sounds like security nightmare. 21.3.2016 7.47 ip. "Glenn Pierce" <glennpierce at gmail.com> kirjoitti: > Will ask my boss :) We are hosted on memset so not so easy to update > > Thanks > > On 21 March 2016 at 17:36, Eero Volotinen <eero.volotinen at iki.fi> wrote: > > Centos 5 is still soon end of life. Using it as ipsec gateway is .. > >