similar to: BLF not working after reload

Actually, I have tested this here with an Aastra 9133i and an Asterisk@Home server, and the 9133i will re-subscribe on its own after an Asterisk reboot, if you wait long enough. It took on the order of an hour to do so. Of course, a phone reboot will get it done faster, if necessary, but it _will_ eventually re-subscribe on its own. > Thanks Olle, > > So am I to understand that you

Actually, I have tested this here with an Aastra 9133i and an Asterisk@Home server, and the 9133i will re-subscribe on its own after an Asterisk reboot, if you wait long enough. It took on the order of an hour to do so. Of course, a phone reboot will get it done faster, if necessary, but it _will_ eventually re-subscribe on its own. In another thread, I've seen a response that the GXP2000

Hi, I configured Buddy Watch function on my Polycom IP 601. It works well, until I make a reload of Asterisk. After reload, if I give the "show hints" command in Asterisk's CLI, it says that there are no watcher for the extensions that I configured. Before the reload in the CLI appears: -= Registered Asterisk Dial Plan Hints =- 3002 : SIP/3002 State:

I tried 1.0.1.12, 1.0.1.13 and now 1.0.2.13 on the GXP2000. I doubt it's the firmware if it is happening on two completely different phones. I read of a bug in Asterisk that exhibited this exact behaviour that was apparently fixed in Asterisk 1.2.0 as far as I can tell. http://bugs.digium.com/view.php?id=3644 > -----Original Message----- > From: stoffell [mailto:stoffell@gmail.com]

FYI, spoke with Grandstream this morning, the GXP-2000 release has been delayed again. Looking like April now before these hit the street. -- Cory Andrews Senior Partner VOIPSupply.com +++++++++++++ V: 800.398.VOIP X22 F: 716.630.1548 E: Cory@VOIPSupply.com

I am trying to set up the BLF on a GXP2000. Currently what I have is extensions.conf: [globals] polycom430=SIP/101 [internal] exten => 101,1,Macro(voicemail,${polycom430}) [macro-voicemail] exten => s,1,Dial(${ARG1},10,tT) exten => s,2,VoiceMail(u${MACRO_EXTEN}@default ) exten => s,102,VoiceMail(b${MACRO_EXTEN}@default) [ext-local-custom] exten => 101,hint,${polycom430}

I have been struggling with this issue for about a year now. There were just too many IP phones to choose from at all sorts of price points and not enough information about any of them. Now I am looking at the situation again and if anything it has gotten worse. There are even more phones and all sorts of opinions. For every person that says phone x is great there is someone else complaining

Hello, I am just asking this because I am note sure if the problem is on my side or not, I saw some comments on SIP realtime today so I was wondering, has anybody has SIP realtime working with a softfone ? If yes, please confirm, that would give me a light. My previous message to the list is below. Thanks. Frederic ----- Original Message ----- From: Frederic Jean To:

Version - Asterisk SVN-trunk-r12793M (1.2.4) I have 4 Grandstream GXP 2000 phones configured. However at the moment, I have had to disable BLF, Hints, and Call Limiting due to an extremely annoying bug which seems to make the phones channels "lock" in busy after a call has been hungup. If I do a show hints after say extension 200 has hung up I get the following -= Registered

Hi Guys we have a system that uses a lot of custom hints based on the extension the extensions use the format of ext-system for example 200-pbx01 when starting asterisk the "core show hints" show the correct hints and blf works as expected in the extensions.conf we have _.,hint,Custom:${exten} when running dialplan reload all the hints lose the dashes (-) they become 200pbx01 of course

Hi, I used Grandstream (gxp2000, gxp2020) and Snom (370) SIP Phones, but with 2 extensions BLF status does not work correctly. have someone ever tested a Sip Phone with more then 60 BLF without problems? Can someone suggest me model and brand? Thanks, bye. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Stopping and restarting Asterisk will lose the hints, then you will have to wait until the phone registers again. With 1.2.7.1 a reload shouldn't lose anything. Change the register time on the phones to something less that 60 minutes if it's a big problem. Instead of factory defaulting the phones you might find a simple restart will re-register the phone and BLF will work on the phone.

Hi Everyone, We use the top buttons on Aastra 55i to login and logout from Queues. This is the order: Button 1 = Login to English Queue Button 2 = Login to Spanish Queue Button 3 = Logout of English/Spanish Queues There are indicator LEDs on each of these buttons. Is there anyway we can send a SIP request or some other communication to get the Aastra 6755i phone to keep the LED for login set

Hi, Is anyone aware of a SIP hardphone with Busy Lamp Fields supporting 2 colors (or more) ? This could be very useful to support extended presence, for instance. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090519/0b8f1b62/attachment.htm

Is there anyway to "spoof" a BLF signal to a phone from within a dialplan? That being so I can turn a BLF light on or off on a phone when a certain thing happens in a dialplan?

Hello, I configured both asterisk and grandstream 2000 accourding to howtos on the web.. And everything seems working fin. But if i reload asterisk grandstream stops working with BLF. I need to restart the phone to enable BLF again. Any clues??

has anyone done it? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080528/ff622d28/attachment-0001.htm

I'm trying to get the BLF to work correctly on my Polycom phones. I have the buddy watch working correctly, but can't get the BLF to change based on the state... Example: When an extension is ringing, I get the same 'red light' that I get when the extension is actually in use... I was wondering if anyone had any experience with getting the Polycom phone to

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

I have servers setup in versions 11 and 13. Between two 11 servers, I had no issues sharing BLF, and assigning the hints on my Cisco 525G2 phones. I've upgraded to 13 on one of these servers, and now can't share BLF. I get something like... [2017-07-15 22:35:49] NOTICE[3483]: res_pjsip/pjsip_distributor.c:347 log_unidentified_request: Request from '"Travis Ryan" <sip:612