similar to: NIC detection by anaconda

Has anyone had any luck getting this to work? The kernel provide skge, sky2 and sk98lin modules all fail to load. I was able to download the latest version from the syskonnect.de site, and with some hacking/klduging of their install script managed to compile the module in there (a newer version of sk98lin, it seems) which recognised the card... but this isn't really sustainable 'cos new

Is anyone using sk98lin Gigabit Ethernet adapters under CentOS 4.x? The version of the driver that ships with CentOS 4.x kernels was too old to support the onboard NICs on some Intel server boards that we recently got, so we installed a newer driver using DKMS. However, we're having problems finding a stable driver to use: the first version that we tried (7.09) gave a kernel panic when I ran

Hello List, some time ago i already asked this, in the meanwhile i did not found a solution nor i have any idea why this happens. Scenario: Every now and then i get this urgent warning: 1 Time(s): Dead loop on virtual device br0, fix it urgently! Stephen Hemminger wrote (16.08.2006 20:09) this: > It looks like a bridge ended up including itself some how. Its for me unclear when this

Hi, I''m a newbie to Xen and I need some help. I saw user ''datto'' had a similar problem but changed to FC4 to resolve it. I''m currently running FC3 and Xen2.0.7. I did the usual ''make install'' and I can boot into Xen dom0. However, my network card is not working. The driver is found in the linux-2.6.11.12-xen0 tree but not selected. I

My dd (sk98lin v7.09) supports 3c940 (Marvel/Syskonnect) which the stock v6.x drivers doesn't . Successfull tested on a Asus A-7N8X Deluxe with Marvell Gigabit Lan the dd is available at http://slackpkg.ath.cx/centos/disk/sk98lin/

To squelch the questions (related to the changing content on www.centos.org), I decided this needs to be published. The CentOS Team has been contacted by representatives of Red Hat's hired legal team regarding the use of Red Hat Trademarks on www.centos.org. (Full Email follows.) While the CentOS team feels we are using Red Hat's marks in a fair and legal manner, we have no choice

It would be great to avoid STLPort and use plain vanilla VC... as I told, the biggest difference it's how the hash_map and hash_set are implemented, but I'm not so strong in C++ for resolving the iussue. About the build procedure, it's based on scons, and it's still at a very preliminary stage... Right now I'm trying to build TableGen with it, as till now I've always

Uh... this may be a silly question, but why can't you include <stdio.h>? It'd be much better than <iostream>. Anyway, I think I'll try this weekend to come up with my own way of building on Win32. I prefer that building on Windows depends only on Microsoft and GNU tools, and the fewer of the latter the better. My gut instinct is to capture all the files generated by

Hey all, I'm having problems where there is significant static when making SIP -> PSTN calls. SIP -> SIP and SIP -> VM calls are totally clear and fine. Here's the setup: Polycom 601,501, and ten 301s. Digum 2400 TDM card w/echo cancelling, 12 FXO ports. The TDM card is on IRQ 5 with nothing else on it. Server Specs: Asus P4P800E Deluxe P4 3.0 Ghz 1 GB Ram 80 GB SATA HD -

Hello, I'm trying to install CentOS 5.2 on an HP 6730s notebook. All's going well except for one little item -- the networking. Never thought I'd have trouble with an Ethernet adapter, so I didn't even check before buying this machine; it was cheap. The adapter is a Marvell Yukon 88E8042 PCI-E Fast Ethernet controller. I can't find a Linux driver for it except one that

Hi, Hopefully this won''t be too off-topic (I''ve seen both bonding & vlan mentioned on the list, but not really together). I''ve tried to get bonding (2 x 100Mb EEPro, but will want to try on 1000BaseT) and vlans to work together, but without luck. I can get them working fine (seemingly at least - I didn''t tried bursting on the bonded port) individually.

Hi, I am currently working with Memdisk. I setup a floppy disk that boots DOS and performs a VLM login into a NetWare Server.

Greetings ... I hate to ask these questions, but I dought I will get a straight answer from an Salesmen ... I am looking at putting gigabit in as a back bone for a few Linux servers, but I have used an Accton Gigabit ethernet card with RedHat 8.0/9 and found it a little unstable ... do and RedHat users have a suggestion on a good, but not expensive Gigabit card, basicly for a Samba

now that samba3 compile in my redhat 7.2 i want to test it.. reading the documentation that described the new features supported in samba3alpha i cant find too much explanation.. and here is the quiz: now from a win9x client when i see the list of users, i can see groups for adding to my win9x clients shares?? what is the state of support of changing password from a terminal like NT SERVER

I am trying to connect two workstations (CentOS 3&4) directly using a straight through cat 5e cable with a crossover adapter on one of the ends. Both hosts have gigabit-capable ethernet card. According to lspci host 1 has: 03:0e.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01) and host 2 has: 05:00.0 Ethernet controller: Marvell Technology Group

Hello! Scenario: kernel 2.6.22.9, SysKonnect SK-9E21D, vlan, redirecting for packets arriving on than vlan to ifb. Using tcpdump on ifb iinterface I see the following: 03:30:17.322484 5a:71:6f:15:00:17 > 00:00:5a:71:00:00, ethertype Unknown (0xcb69), length 1522: 0x0000: 2000 0800 4500 05dc 3a2f 4000 3c06 d868 ....E...:/@.<..h 0x0010: c299 9143 c3e6 0ec1 0050 0f2a

I'm new to the lists so sorry about any faux pas I may have made. Also I apologize for the length, but I wanted to be sure I covered most of the details. I'm trying to do a PXE install on an Intel 1435VP2 server machine. The PXE install has worked on all the older machines in the cluster, so I know PXE is working. However, these new Intel server machines only support PXE booting from

Me again. The ASUS P5N32-SLI motherboard in my new machine has dual NICs but CentOS has only detected one of them. I've tried rebooting with the network plugged in only to the second one, but kudzu still doesn't find it. Any suggestions?

Hello, I have a 4 port FXO digium card with 3 PSTNs attached to it and AsteriskAtHome setup. Everything is working fine except outbound calls. When I dial a outside number, it works fine, but when another employee trys to dial out while I am on a line, it will not go. I have a outgoing route setup in the AMP interface. Dial Pattern: 1NXXNXXXXXX NXXNXXXXXX NXXXXXX Trunk

He Everyone, We found out that till version 3.02 the Yukon nic is supported after it gives code errors, i'm working a lot with ehtherboot via drbl / clonezilla, and together with Steven Shiau we ask you guys if you can arrange that the Yukon can be supported again. Our thanx in advance. Dave & Steven