similar to: Is SIP "canreinvite" working ok?

I'm dialing DTMF's in a SIP channel using the options: [sip.conf] dmtfmode=info [extensions.conf] exten => _XXXXXXX,1,Dial(SIP/gateway,,D(${EXTEN})) (this is a custom SIP gateway, which receives the DTMF's sent from softphones through Asterisk, and based on them, build the destination PSTN number). My problem is that Dial send the DTMF's to the SIP/gateway user at a rate

I'm developing an application that monitors the state of the incoming calls using Manager events. So, as a part of it, I need to "override" the control of the extensions by the dialplan itself. The problem is that, if I don't declare the incoming extension, Asterisk hangs up the call by default. So I want to know if there's some kind of "ManagerControl() application

I've set voicemail almost successfully, only a minor detail remains :-) I can't get the dates in my local language (spanish). In sip.conf, zapata.conf and voicemail.conf, I've set: language=es and my locale is "es" also. However, the days and months names still appear in english in the emails!!! Thursday 11 de May de 2006, 18:49:34. instead of Martes 11 de mayo de

I'm trying to set the Pickup feature. I'm setting my extensions.conf as: exten => _*.,1,Pickup(SIP/${EXTEN:1}) but if, for example, extension 03 is ringing by a call made from extension 01, and I try to pick it up from extension 02 (by dialing *03 from extension 02), I can see in the Asterisk console (Verbosity set to 10): -- Executing Dial("SIP/01-512c",

Is there a way to access only certain positions in the $EXTEN variable? I'd like to filter my international calls based on the destination country: My dialplan looks like this (1XX0. is the international calling convention for Chile) exten => _1XX0.,1,Dial(SIP/${EXTEN:4}@external_provider) But, I'd like to, depending on the destination country (digits 5 and eventually 6 of EXTEN),

Hello all I've discovered that SIP channels sometimes get stuck in *. I've read some posts from Fri 29 Aug 2003 which mentions this issue, but there doesn't seem to be any final answers I don't know if this is related to the 0001604 bug? Below is a list from one of the incidents: I know the (d) means that it is scheduled for destruction but the 10.1.1.45 channel hasn't

Hello all, When I do 'sip show channels' I have seen a lot of entries where these calls has already been terminated. Some of these channels are bolong to calls being made 2 days ago but still showing from the CLI. They look like 10.223.51.173 0022676583 130b36625fc 00102/00103 unknow(d) Rx: BYE 10.223.51.173 0022676583 5533069e578 00102/00103 unknow(d) Rx: BYE 10.223.51.173

I am using Asterisk 1.4.18 with 70 various Polycoms, 12 analog, and 18 Spectralink wireless IP phones. Most of the Spectralink phones have entries in 'sip show channels' that do not go away. None of the other phones do this. Is there anyway to remove these entries without restarting Asterisk? Any ideas on what could be done to prevent this? Example output: xxx.xxx.xxx.xxx 541

'morning everybody, Here is the setup: 5126800422 called 3035 (3035 is a Cisco 7960). The call is g729. 3035 presses 'Conference' on her phone and calls 8327549222. This call is ulaw. (65.72.107.2 is our Cisco 7206 SIP->PRI gateway.) asterisk*CLI> sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Format 65.72.107.2 8327549222 1758081f67e

Hello, In a couple of Asterisks, after type "sip show channels" we have a lot of these: IP_PEER dst_number something 00102/00103 unkn No (d) Rx: BYE IP_PEER dst_number2 something2 00102/00103 unkn No (d) Rx: BYE We are using ASterisk 1.2.x When I say "a lot" I mean more than 180, more than 230, etc. Is it normal? How we can remove it? Thank you very much, --

I'm communicating a softphone (SJPhone) to a Grandstream phone GXP-2000. The codec order on each one is the next: SJPhone: GSM - iLBC - PCMA - PCMU GXP2000: G729 - GSM - PCMA - PCMU (I have a G729 license, so there's no problem with transcoding G729) In my sip.conf, I've defined the following codec order: disallow=all allow=g729 allow=gsm allow=g726 allow=alaw allow=ulaw And my

I've defined my dialplan as showed below. My internal lines are numbered as 12345XX, and internal users can call another by the entire 7-digits extension, or by just last 2 digits. [invalid] exten => _X.,1,Playback(pbx-invalid) exten => _X.,2,Hangup() [internal] include => invalid exten => _XX,1,Dial(SIP/12345${EXTEN}) ; Short alias for internal lines exten =>

I put canreinvite=yes in my sip, for a sipura 3000 and a xlite, however, if I call the traffic still go throw the asterisk. How come? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060617/8f4449fa/attachment.htm

192.168.1.107 199 6bd3fb49505 00102/00000 ulaw No Tx: ACK 192.168.0.100 110 5c5a4953-65 00101/00005 ulaw Yes Rx: ACK Those channels are stuck talking to each other. The phones are disconnected yet that connection remains. I can clear w/ a restart obviously, but is there any way to tear down a call like that from the CLI? Bill -------------- next

Hi all! Quite a mystery. The following happened when I was on holiday, and no one else has changed any configs of either Asterisk or the Cisco's in the building... The situation: Incoming works fine on all phones. Outgoing only works from non-Cisco phones. When calling from a Cisco phone to an external phone, all the Cisco-user hears is a ticking crackle and after about a minute the phone

Through my Asterisk server, I am trying to use IAXTel to dial 800-type numbers (yes, I know I can do the same thing with FWD and others via SIP, but I wanted to play with IAX a little). It appears I'm running into some sort of a codec mismatch or something because it's not working right. The SIP client is a SPA-3000. In iax.conf, I have something like the following: [General]

Hi All. This is on Asterisk 1.2.13 I place a call between 2 SIP phones (with canreinvite=yes, qualify=yes). I reset the phones (so they don't have time to say BYE). Asterisk seems to think that the call is still ongoing. This persists until I do a 'restart now'. asterisk1*CLI> show channels Channel Location State Application(Data) SIP/5301-089fc890

I am having a problem when a SIP registration fails. I get the following messages in the log: Sep 25 18:51:02 NOTICE[1125329600]: File chan_sip.c, Line 2874 (sip_reg_timeout): Registration for '<user>@fwd.pulver.com@65.39.205.114' timed out, trying again Sep 25 18:51:02 NOTICE[1125329600]: File chan_sip.c, Line 5119 (handle_request): Registration from

I have a high volume asterisk 1.40 installation and I ran a SIP SHOW CHANNELS. (see partial output below). My questions are: 1. "wc-l" of the output shows 4000 lines. Does this mean 2000 active calls? (2 channels per call) 2. The latter part of the output shows "unkn" for Form column. Why does it not know the codec? Could it be UDPTL? Or are these calls messed up? 3.

Hi, After a few attempts, I've managed to grab the files from CVS and build it on a rh redora box I've setup especially for Asterisk. Firstly, we're new to the asterisk scene, so please excuse any "lame" questions which may follow.. We're a new voiptalk.org customer. We have purchased the voip phones (budgetone 102's) and set aside a little box to run Asterisk on.