similar to: RE: Asterisk-Users Digest, Vol 19, Issue 89

Hi, I've been fighting with a sip configuration for a few days, and I just realized why it wasn't working. In my sip.conf, I have the following [someprovider] Bla Bla Bla Bla And in my extensions.conf file, I have this Exten => 555-555-5555,1,Noop(test) Sure enough, when I dial 555-555-5555, it works. What DOESN'T work is if I use an extension in the sip.conf and

Hello All, I am trying to connect to a third party's SIP based Hosted Billing service that supports G729 as I have found it difficult to get hold of prepaid billing solution for Asterisk. I was able to get an IAX2 connection working fine with another provider but as I am unable to find a billing service that supports IAX/IAX2, I need to connect to a hosted billing service using SIP and

>That is what I have. Unfortunately, the context=someprovider-in is being >ignored. I am running asterisk-1.2.4... > >The local-phone context is working properly though. I can't see why one is >behaving as I expect and the other isn't. > > >Its because your incoming call from the provider is not being matched to >[someprovider]. Do a sip debug with an

I have been successfully connected (incoming and outgoing) to FWD for a very long time. A few months ago, I changed from SIP-based FWD service to IAX2-based, and that went fine as well, both incoming and outgoing. At the time, I was running Asterisk 1.0.3 Stable. I rarely use the service, so other than noticing that I was always successfully registered to FWD, I didn't make or receive calls

I seem to be having a problem with transcoding and/or agreeing on a valid codec. I am running a new image pulled from CVS at 1:30 PM CST. The issue occurs when I try to make a call to a toll-free number over sipphone.com. Here's what I see in the console: NOTICE[1259545280]: File channel.c, Line 1478 (ast_set_read_format): Unable to find a path from G729A to ULAW NOTICE[1259545280]: File

Hello. I have a codec problem to send calls from a SIP device to a H323 gateway. First I'll explain the scenario: - Asterisk 1.2.1 - The SIP phone can use any codec I want. - The H323 gateway can only use g729 (cause it's not under my administration) - SIP phone has g729 configured, so my asterisk doesn't need to "transcode" (I don't have licences for g729) - sip.conf

Hi, I am using Asterisk to set up a reminder-like system, with asterisk auto-dialing a user via SIP and playing a reminder file when the user picks the phone. I use Gizmo service for SIP and I'm able to call through it. However, when asterisk dials a number, Gizmo first answers then tries bridging 2 channels. Right after answer Asterisk starts playing the reminder. It obviously results in

for inbound calls, i can register context = from-sipphone register => 1747xxxxxxx:passwd@proxy01.sipphone.com but how do i configure to make outbound calls to them? exten => _1747XXXXXXX,1,GoTo(dial-sipphone,${EXTEN},1) .... [dial-sipphone] ; ; SIP to sipphone.com ; exten => _X.,1,Dial(SIP/${EXTEN}@??????) ^^^^^^

With 1.6.1 svn: [2009-04-26 15:01:00] NOTICE[1844]: chan_sip.c:9927 sip_reg_timeout: -- Registration for '17470121145 at proxy01.sipphone.com' timed out, trying again (Attempt #30) [2009-04-26 15:01:00] WARNING[1844]: acl.c:376 ast_get_ip_or_srv: Unable to lookup 'proxy01.sipphone.com' [2009-04-26 15:01:00] WARNING[1844]: chan_sip.c:10037 transmit_register: Probably a DNS

I have a sipphone.com account, with asterisk set to answer incoming calls, using the following settings (phone number and password omitted) in the Peer Details for the SIP Trunk: allow=ulaw context=from-pstn dtmfmode=rfc2833 fromdomain=proxy01.sipphone.com fromuser=1747xxxxxxx host=proxy01.sipphone.com insecure=very secret=xxxxx type=peer username=1747xxxxxxx The Asterisk machine is

I am trying to place an analog outbound call from a Sipura SPA-841 through a * server with a TDM400P and 4 FXO's. When I call in from an analog line everything works fine, I can talk over the SIP phone. When I call out, * says: == Spawn extension (from-sip, [phonenumber], 1) exited non-zero on 'SIP/sipphone-d29d' -- Executing Dial("SIP/sipphone-9eb0",

Does anyone else have DTMF issues with SIPPhone? When calling into my DID, and entering, say, 1002. Sometimes it will recognize it properly (rarely), other times it will receive something different. Such as, 1102 or 1000, etc. Has anyone else been having these issues? I'm only accepting ulaw and alaw, and my relevant sip.conf information follows: [sipphone] type=peer

You will probably have to build that yourself, or really customize something off the shelf. Depending on what phones you are using you might be able to do that via the phones xml interface. Have fun with that I would be interested to see how it goes. -- Justin -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

Michael Robertson, founder of both MP3.com and Lindows, has launched a new company to supply inexpensive SIP phones ($129 for two) and related services. See today's press release at http://www.sipphone.com/tiki-index.php?page=SIPphone%20Inc My question for the list is who will be the first to report on the compatibility and usability of the SIPphone with Asterisk? The functionality

I have an Asterisk 1.6.2 server on a public IP, Cisco 7940 on the localnet, and a trunk to Sipphone/Gizmo/Google Voice. The externhost and localnet parameters are all set correctly in sip.conf. An inbound call from Sipphone works great until the local channel places the call on hold. During hold, the Sipphone user cannot hear music, only silence. The silence continues after the hold, though

Hello, can anyone comment on how one could use SIPphone's $89 All-in-One adapter with Asterisk? Sounds to me like it should work as both a FXO and FXS. It would be a cheap way of getting started with Asterisk and PSTN. Any comments on the SIPphone FX200? Any comments on SIPphone in general? Thank you for your help

I'll admit it. I'm a asterisk newbie (but no stranger to telephony). The setup is simple: two Grandstream BudgeTel 100 phones (SIPPhone specials) on a private segment calling to a Linux box acting as the segment's firewall with a leg on our public network. The phones are setup as SIP/phone1 (x1000) and SIP/phone2 (x1001), respectively (thanks to the Asterisk HOWTO). Getting IAX

Hello when i dial a toll free no using sipphone i get this error message. How do i solve this? Any help will be appreciated. console message: Starting simple switch on 'Zap/2-1' -- Executing SetCallerID("Zap/2-1", "17473863282") in new stack -- Executing SetCIDName("Zap/2-1", "Deepak JV") in new stack -- Executing

Has anyone else had problems registering with Sipphone over the last few weeks? Previously, this had worked fine. I contacted Sipphone technical support, but they're not much help. register => 17471234567:password@northamerica.sipphone.com/123

I am trying to get asterisk to dial this address : sip:723@216.52.153.207 Using a softphone on my PC (217.168.168.49) it dials immediately and I get a voice prompt .. I have configured an extension, 1303 on asterisk, modifying the demo configuration : exten => 1303,1,Dial(SIP/723@216.52.153.207) When from my softphone I dial sip:1303@217.168.168.51 on the console I get : -- Executing