Displaying 20 results from an estimated 6000 matches similar to: "configure TE205P on asterisk@home"
2006 Feb 19
1
[slackware 10.2 and TE205P] Unknown signalling method 'pri_cpe'
hi
after some testing with A@H, i've decided to install my asterisk
server on a slackware (because it's my favourite distro and it is
still suggested here
http://www.voip-info.org/wiki-Asterisk+Linux+Slackware)
, so, i've installed the last 10.2 release, and i've recompiled the
2.6.15.4 kernel.
then i've downloaded asterisk1.2.4 and zaptel1.2.4
i load module zaptel and
2006 Apr 10
3
E1 PRI problem with TE205P
Hi all,
I've setup a PBX in production environment last week but we have immediatly
find out drop conversations and lot of errors (in asterisk logs) like:
Apr 10 17:30:48 NOTICE[25154] chan_zap.c: PRI got event: HDLC Bad
FCS (8) on Primary D-channel of span 2
My configuration is:
Motherboard: SuperMicro P8SCT (Intel E7221 chipset)
Hypertrading and APIC enabled
CPU: P4 3GHz
Digium TE205P
2009 Feb 09
1
Noisy Ring Back Tone with TE205P card
Hi,
I am having problems with an Asterisk with a Digium TE205P card. The
issue is that the Ring Back Tone is noisy. I am making modem's calls and
this noise influences on the initial negotiation protocol, so modems
have to recall.
My configuration is:
Asterisk version: Asterisk 1.4.21.2
Linux version: CentOS release 5.2 (Final)
Card: Digium TE205P
2007 Mar 15
2
A200 card problem
Hi -
I just got an A200 card with 1 FXO and 1 FXS module. Sadly, I can't
make it work- currently, asterisk will not startup because of a bad
module. Below are some log files/config files. If anyone has any
suggestions, I'd appreciate it.
I used Trixbox 2.0 and followed instructions on (http://
sangoma.editme.com/wanpipe-linux-asterisk-atHome) - no problems
running through or
2005 Jul 17
2
HFC BRIstuff woes
Hi All,
It's broken !! (drat)
Asterisk if failing to load with the following error (taken from end of
/var/log/asterisk/full) after adding bristuff.
Can anyone help please?
Jul 17 19:57:54 VERBOSE[2503]: == Registered channel type 'Phone'
(Standard Linux Telephony API Driver)
Jul 17 19:57:54 VERBOSE[2503]: [chan_zap.so]Jul 17 19:57:54
VERBOSE[2503]: [chan_zap.so] =>
2007 Apr 21
3
FAX on PRI and TE205P
Hi
i have a PRI connected to a TE205P.
Actually, can i send and receive FAX through Asterisk using stable solutions?
Or shall i connect an ATA to Asterisk and then a modem with Hylafax?
--
/*************/
nik600
https://sourceforge.net/projects/ccmanager
https://sourceforge.net/projects/nikstresser
2007 May 23
3
TE205P, E1, Panasonic PBX and hang-up issues
Hey folks,
I have a Digium TE205P working as a man in the middle:
PRI line -------- Asterisk/TE205P -------- PBX
The PBX is a Panasonic KX - TVP 100.
Everything is working great except for one little issue. Asterisk isn't
hanging up the PRI B channel when the PBX channel is hung up.
I don't want to overload you with information but please ask if more is
needed. I suspect I'm
2006 Feb 16
1
Problem making outbound calls on TE210P using NFAS
Hello,
I'm running Asterisk@home 2.5
asterisk 1.2.4
zapatel 1.2.2
libpri 1.2.2
on a Dell Poweredge 2850 (1 CPU) with a TE210P
I have 2 t1 circuits using NFAS with dchan on 24 and no backup dchan. I am able to receive inbound
calls on all channels and can only make outbound calls on channels 25-48.
Attempting to make an outbound call on channels 1-23 results in congestion.
2005 Sep 28
2
TE205P in loopback?
2004 Nov 23
7
Unable to open master device '/dev/zap/ctl'
I installed TDM400P and X100P pci cards in a system running mandrake 10.1
official, kernel 2.6.8.1-12mdksmp. I can compile zaptel, libpri, asterisk
and modprobe (zaptel, wcfxs, wcfxo) without errors. Except that running
ztcfg and asterisk fails.
[root@asterisk asterisk]# ztcfg
Notice: Configuration file is /etc/zaptel.conf
line 3: Unable to open master device '/dev/zap/ctl'
2006 Mar 22
2
connecting Avaya Partnet with asterisk , TE205P
Hi ...,
I've a TE205P card installed in my asterisk box.Port 1 of my card is connected to service provider.From port 2 I want to connect Avay Partner system.
what type of cable I require to connect the partner system (straight/cross over). How the call routing from outside will be done to epbx.
Thanks inadvance
regards
rudra
-------------- next part --------------
An HTML attachment
2007 Apr 15
3
Digium TE205P and channelbank
Trying to find my feet here. If I wanted to connect Asterisk to a PRI and
throw in a T1 Adtran channel bank into the mix for fax machines would the
following work?
Connect PRI line from telco to Port 1 on the Digium Wildcard TE205P.
Connect Adtran TA-624-T1 to Post 2 on the Digium Wildcard TE205P
also, would I need a crossover to the channelbank or is it a patch lead
like the connection to the
2006 Mar 14
0
help required configuring card
Hii,
I've a Digium TE205P card and I'm running asterisk@home in a box.I want to configure this card in that box.But as it is a dual port card I'm not sure how to configure it in my box.By searching diffrent site I could able to make a sample configuration bellow I'm giving.Basically I want to connect one T1 connection in one port and in anather port of the card I'll
2005 Jan 28
4
Ouch ... error while writing audio data: : Broken pipe
Hi,
Can anyone help me with this:
I have downloaded latest stable version of Asterisk using the
asterisk-update.sh script.
Compilation and installation passed well.
When I start Asterisk I get the following error:
[pbx_realtime.so]Jan 28 09:35:08 WARNING[3253]: loader.c:258
ast_load_resource: /usr/lib/asterisk/modules/pbx_realtime.so: undefined
symbol: ast_load_realtime_multientry
Jan 28
2008 Jan 03
2
HFC-S zap channels always busy
Hi list,
Attempting to get an ISDN-BRI line connected using an HFC-S PCI card
together with Asterisk v1.4.14 and Zaptel 1.4.7 on a Debian etch
system, I find that I can't access the card's resources because the
channels are always be busy. An attempt to call out results in the
following CLI output:
== Primary D-Channel on span 1 down
== Primary D-Channel on span 2 down
2005 Jun 04
4
X100P installed OK, after added TDM400P Asterisk would no longer start
Hello
I setup Asterisk@Home with purely VoIP and it worked fine. I then added an
X100P card so I could call out / take inbound calls via PSTN and that went
fine. But I have just added a TDM400P card (specifically a TDM30B) and now
problems.
Here is some of the output. Any ideas on what I should be looking at next?
When I run genzaptelconf -s -d I get lots of erors on screen - bit I can
2005 Aug 02
1
Config HFC-card in asterisk.(Config the phone and asterisk)
Hi!
I am trying to get my ISDN phone to work with my asterisk box.
Now my asterisk won't start.
Current situation:
I have a cable from my Billion ISDN (Bipac V1.0) to my old NT1.
The cable is crossed like this:
1
2
3 -> 4
4 -> 3
5 -> 6
6 -> 5
7
8
Then I have a cable from the NT1 to the ISDNphone(not crossed cable). Both
cables are connected in the ISDN
2006 May 10
1
ISDN, TE205P, I'm goind crazy :>
Hi guys,
Currently I just purchased the TE205P for the installation of my ISDN30 setup. I
compiled, setup the card correctly I think. When I do the ztcfg -vvv it shows all 31
channels clear, with 30 bchannels using for voice ranging from 1-15, 17-31, and 16
is the dchannel. However, when I do a cat /proc/zaptel/1 I see only 24 channels
configured, and then, when I do a cat /proc/zaptel/2 I see
2006 Oct 26
1
PRI (TE205P) allways RED/NOP
I have a TE205P, jumpered for E1, added the missing wct4xxp-line to
/etc/modprobe.d/zaptel, zaptel.conf is just
span=1,1,0,ccs,hdb3,crc4,yellow
span=2,2,0,ccs,hdb3,crc4,yellow
bchan=1-15
dchan=16
bchan=17-31
bchan=32-46
dchan=47
bchan=48-62
Which, according to my reading of the documentation I could find, should be
correct. ztcfg doesn't complain about anything, yet all I ever get is RED
2008 Apr 02
1
TE205P
Hello,
I am working on a project and have a few questions. I want to connect
one port of the TE205p to the PSTN, and another port to the PRI port
of a PBX. Basically Asterisk will sit between the PSTN and the
existing PBX. Are there any gotcha's I need to be aware of? Will the
existing PBX be able to dial through asterisk as if it was a PSTN
connection?
--
Isaac McDonald
Got VoIP?
imcdona