similar to: Polycom remapping SpeedDials

Hi, Just started using an asterisk-based PBX with Polycom IP501 phones. Am Fairly satisfied and am starting to get into FTP setup of the phones. Have figured out most things except for how button remapping works. In sip.cfg, I have this entry: <keys key.IP_500.31.function.prim="DoNotDisturb"></keys> This works as expected but if I try to change the remapping to any

I need to find a way to have the Polycom phones automatically park calls. Right now my users hit #70# (I know the last # is optional but it speeds it up.) to park a call. Personally I think this is easy, but my users would like one button to do this for them. The Polycom has buttons we don't need (Transfer & Services), it would be nice if I could remap one of those buttons to dial

A follow up (late better than never) Finally had time to sit down and look at this sip.cfg <keys key.scrolling.timeout="1" key.IP_500.31.function.prim="BuddyStatus"/> This turns the Services key which I never use on a 501 into the Buddy Status. It even works while on a call. One touch! Bill ________________________________ From: Bill Gibbs

Hi, Does anyone have any experience with a Cisco 7961 + 7914 Operator Console setup and speeddials/BLF on Asterisk 1.4? Would appreciate feedback if this works reliably. I have a 7961 on skinny registering on an 1.4.19 box with chan_sccp and speeddials work fine so that part seems ok. I have no experience with the BLF part. >From googling around it seems that BLF on the 7914 only works with

Hi, Does anyone know how to define speeddials in XML for the 7970 sip firmware?. I've played with the SEP<mac>.cnf.xml file that was posted previously but can't find a way to do it. I can define them on the phone usually (seems a bit buggy) but if the phone reboots they get lost from the config. Does anyone know a way to do this? I'm guessing it could be within the

On Sat, May 28, 2005 at 01:51:56AM +0200, Stefan Gofferje arranged a set of bits into the following: > Hi folks, > > I'm trying the latest mayday chan_sccp and found it difficult to have > more than three speeddials. I have defined only one line but can't get > more than three SDs. On console, * says > > May 28 01:44:12 ERROR[26933]: sccp_actions.c:252 >

Hi, Has anyone here reprogrammed their Polycom features keys using sip/ipmid.cfg? If so I would be really grateful if someone could send me an example as I have tried various entries for hours now and don't seem to be getting anywhere. Any help appreciated. Kind regards Jamie Heckford Technical Consultant

I have provisioned a bunch of Polycom 301 phones to get the config files from my ftp server. Out of the 4 phones 2 get the config file however the other 2 cannot contact the boot server. I have reboot the phones a number of times remotely (the client is 400 km away) through vnc and logging onto the web config internally. No matter what I change on the web config page it is not saved. I feel I

On Sat, Jun 04, 2005 at 10:09:29AM +0200, Stefan Gofferje arranged a set of bits into the following: > Hi folks, > > there are some 3rd party patches available for chan_sccp which add a > feature and fix a few problems: > > http://www.sineapps.com/news.php?rssid=726 > > sccp_cli.c.diff <http://www.newace.com/asterisk/sccp_cli.c.diff> > Adds support for

Ok so I added to my Freepbx config running Asterisk 1.2.4 in extensions_custom.conf ; intercom exten => _7XXX,1,SIPAddHeader(Alert-Info: Auto Answer) exten => _7XXX,2,Dial(SIP/${EXTEN:1},12,Tt) and configured my Polycoms via this page http://www.voip-info.org/wiki/view/Polycom+auto-answer+config for auto answer and that works fine if I dial 7 then the 3 digit extension. No

I have this: <%= @tech_standard.category + " " + @tech_standard.point + "." + @tech_standard.subpoint %> I get this error: cannot convert Fixnum into String point and subpoint are number. How do I concatenate those values? Seth Buntin Web Resources Coordinator Kentucky Academy of Technology Education Murray State University --------------

I have this in my controller... @tech_standards = TechStandard.find_by_sql("SELECT * FROM tech_standards WHERE subpoint <> 0") Everything is fine except when I look at my view I still get supoints that are 0. When I run this query in my query browser I don''t. View: <select name="resource[tech_standard]" id="tech_standard">

How can you store "pauses" in speed dials for the GXP-2000? I used something like 8005551212,,,1,7890 to dial the toll free number, wait 6 seconds (I'm used to the commas being a 2 second delay), pressing 1, waiting 2 more seconds and then entering 7890. However, when I press the speeddial button, the phone freezes. Thanks, Waldo

Support PV on HVM MSIX remapping The technique is the same used with MSI: if the guest enables an MSIX passing 0 as vector number, then read the address and use it as pirq number for the following mapping request to Xen. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> diff --git a/hw/pt-msi.c b/hw/pt-msi.c index f0fb3e3..b01744e 100644 --- a/hw/pt-msi.c +++

For IOAPIC interrupt remapping, it only needs to remap ioapci RTE, should not remap other IOAPIC registers, which are IOAPIC ID, VERSION and Arbitration ID. This patch adds the check for this and only remap ioapci RTE. Signed-off-by: Anthony Xu <anthony.xu@intel.com> Signed-off-by: Weidong Han <weidong.han@intel.com> _______________________________________________ Xen-devel mailing

I removed a mapped drive (over a UNIX share) and then mapped it once more to the original location. However, now I cannot delete files in that folder but can create them. Could anyone please assist? Thanks

I cannot seem to get the remap-file function of tftpd working right. I can sucessfully place files on the server but the remap feature is not working. I look in the logfile and it has an entry in there for tftpd. remap: input: startup-config Jan 13 21:47:50 proxy in.tftpd[25438]: remap: done Jan 13 21:47:50 proxy in.tftpd[25438]: RRQ from 192.168.0.12 filename startup-config I think that I

MSI-x may have multiple vectors, however in current interrupt remapping code, one device only has one entry in interrupt remapping table. This patch adds ''remap_index'' in msi_desc structure to track its index in interrupt remapping table. Signed-off-by: Haitao Shan <haitao.shan@intel.com> Signed-off-by: Weidong Han <weidong.han@intel.com>

Forgot to say in previous addition: I checked, and memory hole remapping was enabled in the bios.

I have a system with a Matrix Orbital keypad (only) on ttyS0 which generates it own strange bytes when keys are pressed. Is there something similar to the KBDMAP directive but for serial input? This is a serious problem for us (i.e. we have to remap the 'L' character to be interpreted the same as an "Enter" (i.e. <cr>)) and so if there isn't a way of doing this