similar to: Corrupt CDR records in Asterisk 1.2.x

Kapejod is working on a fix for the CDR problem in bristuff. See below ----- Forwarded message from kpj@junghanns.net ----- Resent-From: tzafrir.cohen@xorcom.com Resent-Date: Fri, 10 Feb 2006 13:01:25 +0200 Resent-Message-ID: <20060210110125.GU16880@xorcom.com> Resent-To: tzafrir@cohens.org.il Envelope-to: tzafrir.cohen@xorcom.com Delivery-date: Fri, 10 Feb 2006 05:19:50 -0500 Date: Fri,

I have a problem with Asterisk-bristuffed using a zaphfc card. I am located in the Netherlands, so I have an ISDN line from KPN. When I start Asterisk, and plug in the ISDN line, everything works perfectly for about 5 minutes. And then the ISDN line is down for 1 minute, and after that minute, the line comes back up and works for another 5 minutes. Every time the line goes down I get the error

Hello, I have a problem with the Bristuffed version of Asterisk. I have tried Bristuff-0.3.0-pre-1m,n,o,p (Asterisk 1.2.6 to 1.2.7.1) but they all have the same problem it seems: The setup: A machine with a single hfc-s PCI BRI adapter running Gentoo 2.6.15. Asterisk 1.2.0 (BRIstuffed-0.3.0-PRE-1) installed and working perfectly. Grandstream gxp-2000 as a SIP phone, and a normal mobile

Hi all, I have a strange problem, regarding zap channels and cdr. I am using asterisk bristuffed version Asterisk 1.2.2-BRIstuffed-0.3.0-PRE-1i, Copyright (C) 1999 - 2006 Digium, Inc. and others. with two billion ISDN cards. I also installed asterisk addons, last stable version via cvs internal calls, or calls starting from internal sip or iax phone are recorded in the cdr all without any

After upgrading a CentOS 3.x box to CentOS 4.1 (both x86_64 with an Athlon64) I also wanted to get the latest bristuff. Unfortunately bristuff without florz causes the box to kernel panic within hours (console will complain about bad frame received something). It seems however that the florz patch will not work for x86_64 arch. Bristuff -0.2.0-RC8j compiles fine without the florz patch, but

Hi everybody I have installed a TrixBox with Asterisk 1.2.14 and relative upgreaded software. I Bristuffed it with last version of bristuff to use a Hemlet PCI ISDN CARD in a normal Italian EUROISDN installation. The * works fine except for the ISDN CARD. It is always Channel D down, but if a Call comes in, it works perfectly for some time, both inbound and outbound. It prompts Channel D UP!

hi, Just wanted to inform everyone, if you're using the latest bristuff's you might (depends on the country!) have hangup issues. The issue appears every time you dial an external number, and hangup after letting it ring for a few times. Then the remote party keeps ringing. In some situations (we only encountered this while dialing to other * servers) it keeps the line open on the

Again trouble compiling bristuff-0.3.0-PRE-1q with the florz patch on a x86_64 box (I guess nobody is using x86_64 platform or is able to fix this themselves?) First of all when bristuff is downloaded and compile is started it appears that the bristuff Makefiles are badly broken. The asterisk Makefiles all do see to find the kernel sources on a RHEL4 box in the proper directory, the pure

Hello * users I've problems with sound quality on zaphfc Asterisk works fine good sound quality. If I do "make load" in the bristuf.xx zaphfc dir then sound quality drops directly. Even if I don't load the chan_zap in the modules.conf I use this config on more (even old 400Mhz machines) and works correctly. Looks like an hardware problem but I can't find it. I don't

We're having a horrid problem with our asterisk setup. Sometimes calls just go dead - we can't hear what the other end is saying. (I think they can't hear us either). The call doesn't hang up until one of the callers gets bored. Internaly we use Thomson ST2030 SIP phones. Externaly we have 3 ISDN BRI lines (6 channels total), connected to an Eicon Diver server card (4BRI).

Hello, I switched from my PSTN provider to a voip provider. (Voicedata in the Netherlands) >From the moment i switched all inbound calls are terminated after aproximatly 1 minute. The provider tells me it's not their issue since I have no other configuration than all their other users. What can I do. I removed all asterisk functionality by forwarding the inboud call directly to a local

Hi, I'm using spandsp-0.0.3 [http://www.soft-switch.org/downloads/snapshots/spandsp/ spandsp-20061116.tar.gz] on a bristuffed asterisk (1.2.13) [http://212.91.251.199/~junghanns.net/downloads/bristuff-0.3.0- PRE-1v.tar.gz] libtiff is at version 3.6.0 Running on: Linux router2 2.6.17-2-686 #1 SMP Wed Sep 13 16:34:10 UTC 2006 i686 GNU/Linux Debian testing distro. I've tried many

Hi All Apologises if this has been disussed and I missed it. My SetUp I have a sip phone registered to an asterisk box (a1) in one location 1. This phone dials an extension which is in another location, so a1 passes the call via IAX to the other asterisk (a2) in location 2 which then dials the local phone. My Problem The caller ID setup in the sip.conf for the phone registered to a1 is not

Hi, I'm trying to setup a small BRI ISDN <-> voip gateway. The ISDN card is based on Cologne chipset, so I try set it up with zaphfc. The versions i'm running: kernel-2.4.27 Asterisk 1.0.7-BRIstuffed-0.2.0-RC8e zaptel modules 1.0.7 zaphfc is from bristuff-0.2.0-RC8e When I'm doing the insmod on zaptel, zaphfc, zaprtc: Zapata Telephony Interface Registered on major 196 PCI:

Hi all, I am probably missing something ultimately obvious, but I have a problem configuring freepbx... Using Edgy Eft with the cvs freePBX 2.2.1 and followed the Ubuntu installation guide on freepbx.org. System pxe-boots from a server with NFS root on same Using * 1.2 current (from source, not .deb's) Using mISDN-streams (from source, not .deb's) Using freePBX-2.2.1 (from source, not

Hi, Reading from www.voip-info.org, i can see that "Junghann's chan_capi is now part of bristuff <http://www.voip-info.org/wiki/view/Bristuff> , as of version 0.3.0-pre". What does that really mean ? Shall I understand I can share a Junghanns QuadBRI board between 2 CAPI-enabled software (like a 0.3.0-pre bristuffed Asterisk for instance) ? If positive, what are the pros and

Situation such. There is an asterisk working as office pbx. 6 fxo - 18 fxs ports. All works perfectly, but some times in a week something occurs. Could not catch what exactly yet. But symptoms such. The asterisk infinitely writes the message of a type to broad gullies: WARNING [20757] chan_zap.c: We're Zap/8-1, not ... <ZOMBIE>. Numbers of channels can change. Because of that that broad

I've got a Cisco 7970 that's not completing its network registration to Asterisk. The "Registering" message stays on the screen (with the moving time wheel). After a few minutes, the onscreen message flashes "Updating CTL" then "Loading...", then the status messages update with: No valid CAPF server File Not Found: CTLFile.tlv No CTL installed

Hi, recently I changend a few things in the configuration of the Asterisk 1.2.17-BRIstuffed-0.3.0-PRE-1y-d of a customer. One demand was that different groups of SIP-Phones are using different trunks to the outside worls, so I moved some of them to a Support context. However, dial out from this phones failes as they're still looking for an extension in the default context, which doesn't

Hello, I recently bought a Junghanns Octobri Card. I have some problems with this card to make outbound calls but I can receive calls. I have 3 lines to PSTN and 3 lines to my existing PBX FRANCE TELECOM <-- OctoBRI --> Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1h <-- OctoBRI --> PABX e-Generis <----> ISDN Phones |