similar to: FXS with v.90 modem support?

I am trying to configure a VegaStream 50 FXO to work with asterisk. The problem that I am having is that the VegaStream does not support incoming registration from asterisk. VegaStream only allows outbound registration. My question is does asterisk allow incoming registration from an FXO? If yes how? Or better yet, has anybody been able to make the VegaStream FXO work with asterisk? According

Hi, I'm looking for an ISDN FXS for home use (so the solution has to be affordable :) Let me tell you exactly what I want to do first. I want to connect a regular home ISDN phonesystem (does not exist yet so I'm flexible with that, too) to the ISDN-PSTN and Asterisk at the same time. I want to be able to place calls through the ISDN-PSTN as well as through asterisk eg by dialing 0XXXXXX

Hi everyone, we are working in an big NT environment and now have a new Unix-area. What i want to do, is to change the unix login passwords according to changes in the NT system. The aim is, to simplify the password system, so that the users only have ONE password for everyting. Independend where they change it or on what system they are working on. I have successfully connected the samba

I'm currently looking to interconnect my Asterisk PBX system with the PSTN via a digital PRI/T1. I know a multitude of options exist for internal PCI cards (Digium/Sangoma/Rhino), I was wondering if anyone has any experience or recommendations of external PRI media gateways that support SIP. So far I've found: VegaStream Vega 400 Audiocodes Mediant 2000 MediaTrix 1531 However they are

Hi all, There is something special I must configure in order to get the voice mssage by mail? In voicemail.conf I have: serveremail=asterisk@mydomain.ro attach=yes [default] 301 => 6535,Home Mailbox,dtoma@fx.ro I have tried to let a message for 301, but this message is not forwarded by mail. I am missing something? Thanks, Dan

Has anyone here using VegaStream FXO with asterisk? I just got the Vega 50 10 FXO and all I could manage by now is to get outgoing calls. Any pointers and a script sample would be appreciated. Thanks, Issac

Hi Folks, I'm contemplating using locator() to digitise external graphics. To set context, I would be using X11 display on Linux. To pre-empt the obvious comment: I've found on the R site the suggestion to use the 'pixmap' package. I've tried this, and it works; but it involves building a big R object (the internal pixmap representation), and this chokes my somewhat puny

Hi all, I'm new in the forum, and although I have some experience in Asterisk, I've never work with Asterisk FXO, FXS, E1... cards. I have several costumers with ATAs working with my SER. However one of them bought an Alcatel PBX OmniPCX Enterprise and now he wants I give him a E1 interface for interconection with its new PBX. I understand I need a E1-IP gateway which could be Asterisk

Does anyone have any experience using a PRI gateway, I am looking for a way to have multiple asterisk boxes use one PRI, and send that over the network. I herd there are copper gateway devices (like a X100P card, only it registers with asterisk using sip, and it doesn't have to be physically connected to the box) Does anyone have any experience with a PRI gateway? And could tell me the cost

Hi all, We have several sipura 3000's working well for outbound calls, however the issue we have is that when calls are sent to the Sipura with Dial(SIP/${EXTEN:0}@sipura1) the Sipura does a SIP answer immediately and then proceeds with the call "in band" therefore sending dialing sounds back to the caller. Other SIP gateways we have notably the Vegastream and others do not do a SIP

Hi: I am working on a new system with a TDM-400P card with three FXO modules and one FXS module. The system has been in place for a week. Users are complaining of echo problems. I have noticed this echo myself. It varies in severity. It is sometimes bad enough to make it difficult to converse, but the users find it generally unacceptable. They miss their old phones, which just worked. As you can

Having ISDN FXOs and a bunch of ISDN DECT base stations, I went looking for a CAPI compatible active BRI adapter capable of NT mode. I have found that the 'Eicon Diva Server 4BRI' fulfills theses requirements. However, at EUR 1387 for four BRI interfaces, it does not come cheap. Are there other users of similar hardware that can point me to alternatives ?

Hi, Splus allows pasting a graphics object into the plotting window, which makes it possible to do what you describe below. Now I use R which doesn't seem to allow pasting the picture into the graphics window, so I copy the graph onto a transparency sheet, and stick it onto my screen using tape. The coordinates need to be converted to make sense (as you describe). My methodology with the

Hi guys, I think I posted on this issue before, but didn't get a response. I've still not been able to resolve the issue. I've got a small installation of Asterisk running one 4 port FXS Digium card and 1 FXO Digium card. I'm having difficulty routing modem call through one of the extensions out through the FXO card. By difficulty, I mean it won't work. The calls

I need to do some modem testing at work, just to make sure that I can dial into an emergency serial console modem before I put it into a box and ship it. Unfortunately, we don't have easy access to a pair of POTS lines in the office right now. Looking around the test lab, we have a Cisco 3640 with a 2FXS VIC in it. I can plug my laptop's modem into one FXS port, and plug the serial

Hi all, forgive the question but is it possible to use PCI modem cards (aka winmodem's) as FXO/FXS ports in * ? what about external modems like the USR Sportsters? Thanks in advance, Bryan. Bryan Nolen Lead Developer http://Arc.Net.AU http://cdonline.com.au

Rich Adamson <radamson@routers.com> wrote: > >> I have been investigating on this list and found that faxing is not >> reliable between Zaptel >> cards and that Digium does not support nor >> recommend fax over the TDMXXB interfaces. >> >> Is this true ? Will fax not be reliable enough for my customer ? > > True... the TDM card (or its drivers)

Hi, I am drawing a heat map using gplots of R package. The file (new4) is having values 0 and 1 only. library(gplots) library(marray) x=read.table("new4", header=TRUE) mat=data.matrix(x) heatmap.2(mat, col=colorRampPalette(c("black","red"))(256), #col=greenred(75), Rowv=TRUE, Colv=TRUE, distfun = dist, hclustfun = hclust, dendrogram = c("row"), scale =

I've been reading the Linejack strikes again messages, and have another Newbie question is it possible to use a Voip Product as a Dialout line for * ? I have a Vegastream 100 Voip to PRI. box. With * can I use that as a Dialout / dialin box? The Vega100 does either sip or h.323. Thanks. Bradley Greep

We recently had a customer install that went horribly wrong. Serious echo (pots lines into a cac cb) that, although * did a good job getting rid of alot of it, could not get rid of it all. We tried everything, every canceller, gain setting, etc... combination possible to no avail. Both the vegastream and mediatrix boxes also could not get rid of all of the echo. So, on an off chance, we