similar to: two tellabs 2572 echo board in a 253c mounting assembly?

30 says it's view only in the docs & I can't seem to change it, any other options? > Option 30 allows to set Module Shelf Address/ID.

Hi All, Greg has been a huge help getting me going with this tellabs echo can, but I'm still having some problems getting it to work... I suspect I wired it up incorrectly, so I thought I'd see if anyone can point me in the right direction. Digium tech support pointed me to this doc for a standard T1 cable: http://www.arcelect.com/RJ48C_and_RJ48S_8_position_jack_.htm which looks like it

I am getting ready to experiment with the Tellabs 2752 echo canceller. I have a 255D shelf (and power supply), but am struggling a little on connecting the echo canceller to a PRI. The shelf has 4 25-pair amphenol connectors. The two on the line side are marked "Receive In" and "Send Out". The 2 connectors on the drop side are marked "Send In" and "Receive

Hello All, I have a tellabs 2572 EC, and I was wondering if anyone with experience can wire this up for me... I have the proper tools and info, but not the time. It's easier to send it out and get it done. I know kb1_kanobe originally started the wiki thread, and rather than risking the card, would it be possible for me to send it out to him, have him do it, and send it back? Not to say I

Hey all again, I'm wrestling with echo problems on our sip extensions. I've set these items in zapata.conf but tweaking these values doesn't seem to make much difference echocancel=yes echocancelwhenbridged=yes echotraining=2500 rxgain=8.0 txgain=1.0 are there other settings that can help me tame this beast? Been searching but not turning up anything that'll work here. Thanks

Hello, I have been researching Echo Can's for a while now, and wanted to post this out to the list to solicit feedback (and if my assumptions are correct, hopefully help others out)... If anyone out there knows anything about wiring up an Echo Can, and my outline below is incorrect, please let the me/list know.. I have posted the Documents I received from Tellabs at:

Hello Dan, Have a look at this link: http://www.adcomcorp.com/asterisk/tellabs I got those pictures up there, may be of help. In essence, 1 pair is either a tx pair or an rx pair. If I recall, Orange and Green should be one side, and blue brown should be the other side. I tried to upload them to the wiki (even 40% size) but they didn't show up for some reason... Files are large on the

Can anyone share any advice / documentation on how to configure a Tellabs 2572 T1 echo canceller? I connected one between a T100P and an Adtran TA750 FXO/FXS channelbank, but when echo cancellation is active I get a LOT of snap-crackle-pop (and other problems) on the line. The 2572 has a bunch of configuration options and they're impossible to guess without documentation, which I cannot find

Anybody using hardware echo cancelers a PRI at a time ? What did you use ? How much did they cost ? Where'd you get em. Tell us about them ! Alan

Hi all, I'm getting some noise gate like effects on our sip lines & I think I need to disable silence supression, I'm searching docs & not finding where this can be set, does * have a setting to turn this off? basically what's happening is when we stop talking, the other end hears total silence, but when we talk, they can hear the background noise in the office, this sounds odd

Hi again, I'm trying to setup our non pri T1 (they call it a Long Distance T1), our current pbx has the signaling set to E&M, I can set em in zapata.conf, but I'm trying to track down the proper entries for the zaptel.conf file. The digium docs only show a PRI example. Our current system has these settings: Signalling: E&M Framing mode: ESF Line Coding: B8SZ here's my

hey all, trying to get a zap extension to work & I can dial out normally with it, but if I try to access any of the features (i.e. *97 for voicemail) the zap channel doesn't hear it, and all i get is dialtone. Is there a dialplan setting or something to make the zap channels recognize keys like * or # ? Thanks in advance

Another question, Is anybody using the Tellabs 2572 EC with a PRI. When we moved from our analog lines to a PRI, I thought it would be simple stuff moving the EC to the PRI. Changed signaling, made sure that channel 24 wasn't being ECd and everything came up. But, I was getting complaints of random echo on the PRI. Local echo. Also, we weren?t able to do any kind of modem dial-outs (Adit

Hello, After reading the lists and taking reccomendations from TC, I have finally given up on the echo can built into asterisk. I am sick of hearing complaints from users, so the money spent on a hardware echo can will be worth its weight in gold. I am curious however, about some setup and component requirements. It seems as if every telecom place I call, either never calls back or doesn't

Hey all, been noticing some oddness on a new AAH install... occasionally an incoming zap line with automatically connect with an outgoing extension, even though the incoming line hasn't specified what extension it's aiming for (i.e. haven't tapped in the ext # yet)... so someone's trying to call out from inside the office & are automatically connected with an incoming line.

Hi all, been searching & not finding an answer to this, although I'm guessing it's absurdly simple... I just hooked up a T1 to our * box (1.2.0), which had been using POTS lines via a channel bank.. Now when I call the new T1 circuit, there are no rings, the Autoattendant just picks up right away.. Any clue on how to make it ring twice before getting picked up? I tried immedate=no and

Is there an easy way to disable flash transfers? I'd prefer the users hit # to transfer, since some users are hanging up a call, then dialing another one without giving the handset enough time to actually hangup the call, so it appears that they are transfering the 'ended' call to the new number that they are calling.. I'd like to keep flash functionality for call waiting, but

Hey all, is it safe to run the asterisk-update.sh script that comes with AAH to upgrade only the asterisk binaries? Doug has chimed in a few times saying 'upgrade' when I post problems, but Aah makes this really painful. I'm using AAH 2.0 & am fighting a number of 'bugs' that only seem to be manifesting in my installation. Can I safely upgrade just asterisk and not any of

Hi all, using * 1.2.9.1 and this week all of the sudden calls keep ringing even after they've been picked up... Here's one users summary: When I pick up the phone, I hear a dial tone and I am able to dial out. But for some odd reason, the receiving line picks up while the outgoing line is still ringing. And the receiving line can hear everything while the phone is still ringing. I tested

Hi All... Well, I'm still experiencing LOTS of dropped calls since installing the new (non pri) T1 here... I keep noticing a few things in the logs when this happens, namely the "Wink/Flash" statements and the "Didn't get a frame" messages... Anyone got any ideas on if this is a telco issue, a wiring issue, or an asterisk issue? Been trying to track this down via all 3