similar to: Can Asterisk and new ShoreTel 6 talk to each other?

We have a Shortel system at out main site. We're putting Asterisk servers at several smaller remote sites. I know I'll be able to get the Asterisk servers to talk to each other via IAX, but can they talk to the Shoretel server? Basically, I'd like to be able to, from the main site with Shoretel, dial an extension, and reach that phone at a remote site, and vice-versa. Thank

Hello everybody. I have a problem with an integration between an Asterisk (1.4.24.1) on FreeBSD 7.0 and a Shoretel 7.5 server. To make a very long story short, when someone behind asterisk call an extension behing shoretel everything work as expected. When someone behing the shoretel server call someone behind asterisk the first 10 seconds of the call seems ok but then the line is dropped

Hello All, Here's the problem, we have happily set up several Asterisk servers to offer commercial service in the UK, our wholesale SIP termination partner (Magrathea - use SER/CiscoGW to provide us the service on a public IP address) - till now we have used Asterisk to connect clients on private IP's with Asterisk doing the required conversion for SIP/IAX between public and private

Hi, Someone who has had experience with shoretel VoIP systems, can you please give me a run down of how Asterisk is either better or worse? I am completely unfamiliar with Shoretel systems, but someone had suggested we look into them. I said, you bring your Shoretel features, and I'll show you 10 things Asterisk does or can do that Shoretel doesn't do. I still believe that's

I've got a ShoreTel 210 MGCP phone drops calls. My packet capture indicates that the phone may be trying to renew its registration with *, but reports Restart Method of Disconnected (frame 2), then * seems to take that as a sign that it has lost the connection and closes things down. The phone, meanwhile, seems to think it can continue the conversation until a few ICMP "port

Okay, so I'm a noob. Asterisk looks very promising, so I say "thanks" and "good job" to all who contribute. My * test box is up and running with soft phones using IAX and SIP, so now I'm on to testing hard phones. I borrowed a couple ShoreTel 210 phones from somebody who had them on hand but they only support MGCP. I see that there's an mgcp.conf in

Hi I'm missing something here but I cannot figure out what. What I can see is that the same code works when I load it via source(...) yet fails when I execute it after loading the package I have built (which includes the code. Below is a transcript of my R session. First I load the code from a file, using source(). Then I execute it fine. Then I remove the function object, I load the

I have a client who is using a Shoretel PBX. This PBX apparently does not send DTMF information OOB, but instead sends this inband via the B-channel. This is traversing an Asterisk box via a PRI. The user calls the IVR (1-800-CALL-DHL), receives audio, but is not able to present DTMF to engage the IVR. With some light research it appears that the DSP is not activating until the call is

I have a brand new IAXy I'm playing with. I do not get a dialtone on the phone, or any response at ll on the phone. No sound, no dialing, no ringing. The phone and wire are tested and known to be good. I think I have it setup correctly. When I give the iaxprov command I get this: #iaxyprov 192.168.1.90 iaxy.conf 02: c0 a8 01 5a 05: 11 d9 03: ff ff ff 00 04:

I loaded both Madden 07 and Madden 08 into Wine, and they both run. However, players do not show up (in create a team, create a player) and in their places are a bunch of colored triangles making random shapes. Then, when I attempt to play a game, wine crashes, saying that there is a serious problem (but not specifying the problem itself). Is there something that I've done wrong? Both games

SIP user => Asterisk 1.6 server => SIP Trunk => external destination: works AMI script => Asterisk 1.6 server => SIP Trunk => external destination: Failed to authenticate on INVITE to '"asterisk" <sip:asterisk@(ipaddr)>;tag=alphanumeric' I?ve tried doing things like ?include => contextwithtrunk" in various places, googling, re-reading relevant

Hey, all. While ADA can still be downloaded, that's about all that I see. No development, no recent mention, and -- perhaps worst of all -- it appears not to work properly under 64-bit systems. So, assuming Digium's abandoned it, are there any suggestions of alternatives? Right now, I'm replacing a Shoretel system, and I'd *dearly* love to avoid the incredibly fat client they

All.... I am trying to install vsifax on a 64 bit Centos 5.1 system. The Esker staff have been helpful but no cigar. At first they thought the problem might be related to a 64 bit machine so I tried to install vsifax on a 32 bit Centos 5.1 machine and received the same error. One of their installation scripts is trying to execute a binary called eula which fails. ./eula: cannot execute

guest user, is this a bug, as I have a guest unix user and a smbpasswd smbpasswd user. Both of these have passwords. I've tried this just about every way I can think of! Its driving me up the wall, any ideas would be gratefully accepted. [global] hosts allow = 194.217.17. 127. 213.219.41. 10. guest account = guest security = user encrypt passwords = yes smb passwd file =

I'm new to the asterisk world and have been playing with an asterisk server with 1 FXO card for a couple of weeks. Now I'm looking to start adding IP Desk Phones but I'm unable to come to a decision on what phones to use. I like to look of the Polycoms, but because we are not a "phone company" I can't see us getting reseller authorized for them. Shoretel has some nice

Dear List, I have been using R to create an xyplot using the panel function within lattice libraries. This plot is based on the data supplied in R named 'Oats'. The graph represents oat yield by nitro level with an overlay of each variety of oats for each nitro level. I have three questions regarding this graph: 1) I cannot seem to specify the type of symbol used by the plot, even though

Hello Sorry for the (I guess) simple question, but: I have 7 computers under one 8-port router (D-Link DIR-100, firmware v1.13EU) in my network (actually in a sub-network) and they do not see each other's host names. The router has the 'DNS relay' option enabled, and all 7 computers use the router as the DNS server, which in turn will forward DNS requests to the ISP DNS server.

I have installed red hat 7.3 as a server, apache is running, samba is running, I have an overlay called Webmin, I have shared a file on the red hat machine, set permissions 777, I can see the samba server on my windows 2000 server and my xp pro workstation. When I click on the listed samba server in my network neighborhood, a logon screen is returned, I have tried every userid and pw

Hi, I am new to programming and R. I am reading the manual and R books by Dalgaard and Veranzo to help answer my questions but I am unable to figure out the following: I have a data file that contains 1080 data points. Here's a snippet of the file: [241] 0.3603704000 0.1640741000 0.2912963000 NA 0.0159259300 0.0474074100 I would like to break the file up into 30

Hello I have set up NAT with iptables for an openvpn connection, so that the VPN server could give VPN clients access to the entire sub-net of the server. The probelm is if I start system-config-securitylevel to say disable the firewall, and then again to enable it, my iptable rules are gone ! I did run `service iptables save` before. Is there something I can do to prevent this ? Is there a