similar to: Cisco AS5350

Do somebody using CISCO AS5350 with Asterisk? Which protocol do you using: H323, MGCP, SIP? This direction: [12sp->Asterisk->h323->as5350->isdnPSTN] is ok But reverse: [isdnPSTN->as5350->h323->Asterisk->12sp] cannot hear 12sp, but 12sp hear PSTN (codec g711u) -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all. I have a strange problem, I've got a AS5350 hooked up to a telco using two trunked E1's The 5350 should only act as a GW to a sipproxyserver. THe thing is it seems to be only oneway audio? There are no firewall at all, and the audio still only get one-way When I call from pstn --> as5350 --> sip-sip-phone I can here the sip-phone ,, but the sipphone cannot her the

Hi, We seem to be having some teething issues with a new Hylafax - happy to pay someone to complete the installation. Please contact offlist. Regards, Sahil Gupta Chief Executive Officer VoiceValley Group of Companies Phone: +61-7-30188403 Fax: +61-7-30188499

Hi, I'd like to know how I can playback a pre-recorded message to a user using our system without answering the call. I want to do the above in the scenario where the user dials a number and the number has been dialled incorrectly. Regards, Sahil Gupta VoiceValley

Hi, I have a Gateway running in "TE" (terminal equipment mode as "slave" that I need to connect to my asterisk server using a TE100P card. Can anybody give a quick run up of how to run the TE100P's in Network Termination mode to have this working sucessfully? Cheers! Regards, Sahil Gupta VoiceValley

Try sending 5350 config and oh323.conf, versions, etc... -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Goran Dj. Sent: Wednesday, December 22, 2004 4:43 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Asterisk->AS5350 misplaced RTP to 127.0.0.1(AS5350 party

My configuration is: [ISDNPRI] -- [CISCO AccessServer AS5350] --<H.323>-- [ASTERISK] -- [CISCO ip phone 12SP+/Skinny] When call is initiated from IP phone -> Asterisk -> AS5350 -> ISDN everything working ok (RTP is ok). But, when call coming from ISDN -> AS5350 -> Asterisk -> IP phone IP phone party can hear ISDN party, but ISDN (incoming) party canNOT hear IP phone party

Hi, Is there anybody on the list that recommends anyone for colocation/telehousing in the US? I'm after 2 Servers to be hosted in the US, preferably on the west coast. Regards, Sahil Gupta VoiceValley

Hi, We are trying to port over a PABX to our network. Both PRI's seem to be live however, whenever someone dials out from the PABX Asterisk happens to report : -- Extension '' in context 'samsungincoming' from '736327438' does not exist. Rejecting call on channel 0/31, span 2 If crc4 is turned off, it reports a yellow alarm. Any suggestions? Regards, Sahil

Try these guys: http://easyspeedy.com/ Haven't tried them, but when I was looking into a while back they responded quickly. -- Bjorn -----Original Message----- From: asterisk-biz-bounces@lists.digium.com [mailto:asterisk-biz-bounces@lists.digium.com] On Behalf Of Sahil Gupta Sent: Wednesday, May 03, 2006 1:47 PM To: asterisk-users@lists.digium.com Cc: asterisk-biz@lists.digium.com Subject:

Hi, Just wondering if anybody has encountered a similar problem as I have with recieving calls on Asterisk from a CISCO AS5350 (over SIP). I have dtmf relay configured on the AS, however, when someone calls in from the PSTN sometimes their digits are inputted twice, which messes up the extensions. If there is a better way to terminate calls from a AS without using SIP, that would fix this

Hello, I've got an ISDN PRI circuit terminating in a Cisco AS5350, which in turn is talking to an Asterisk server via SIP for call origination and termination. Seems simple enough, and it works for the most part, but: 1) Caller ID name data comes in on the PRI, but doesn't appear to get handed off to the Asterisk server via SIP, at least not in any format that Asterisk

Hi, We are terminating around 60 channels on one of our Asterisk boxes, which the client sends in H323 mode. Client (MERA) --> H323 --> Asterisk --> IAX --> Asterisk The problem we face is that at random intervals the H323 process (as part of Asterisk) dies and can no longer accept new calls whilst Asterisk is still running happily. We have to then kill asterisk and start it

Hi, We seem to be having an interesting issue with Asterisk whereby, it keeps routing calls coming in to the 'default' context.... regardless of what changes occur to h323.conf. <SNIP> [POP-A] type=user host=1.2.3.4 context=international </SNIP> == Starting H323/ip$1.2.3.4:12914/16313 at default,12126599878,1 failed so falling back to exten 's' == Starting

Hi, I'm looking for someone to do time-to-time mantainence on some of our machines going up in New York. The person *MUST* be stationed in New York. Areas of expertise required: - Proficiency in Linux: Slackware, Fedora - Proficiency on Cisco Routers If anybody is interested, please contact me off-list. Regards, Sahil Gupta VoiceValley

Here is my Configuration PSTN -> Cisco AS5350 -> SIP -> ASTERISK -> SIP -> ATA186 When I call from the pstn to the ATA, the ATA rings but I don't hear anything on the calling side until the call is picked up. When I call from the ATA, everything seems to work fine. When I bypassed ASTERISK, everything seems to work fine. Anyone know what I might have configured wrong?

Hi all. I'm going to implement some large Asterisk based solution. Maybe 4-5 PCs with 1-2 E1/T1 trunks on each. Because some of the traffic will be sended to external VoIP provider, i has some questions 1. Which is the lowest bandwidth consuming codec in Asterisk, which is compatible with Cisco Gateways. Stability is needed too. 2. Have someone allready bulded such a systems and what

Hi, I'm using an Asterisk Server and a Cisco AS5350. They are interconnected via Sip. When I tried using G.729 codec, all recorded announcement of asterisk is no longer heard in the system but when I bring it back to G.711 the announcement works perfectly. Any idea how I can make the announcement work in G.729? Thanks. Cheers, nat -------------- next part -------------- An

Hello that might would be an easy question for someone, but im in doubt Is there any possibility to pass a call from one asterisk to another and then to ZAP channel. For instance I have "A" asterisk with numbering 45670 "B" asterisk with numbering 45680 second asterisk has TE110P card with single PRI port connected to Siemens EWSD. When I originate call from asterisk

I have an * box connected to a Nortel SL100 through a PRI (US) using the Digium TE410P (quad-span T1 card). I don't have access to the SL100 - it is handled by another group. The span comes up OK (timing, framing fine). However, as soon as the D channel comes up, I get endless "HDLC Bad FCS" errors. I modified logger.conf to get rid of the messages (so I could see what else was