similar to: routing question: multipath routing for SIP

Hi All, I have a linux router, configured with two internet connections and two lan segments. I''ve setup multipath routing as described in http://lartc.org/howto/lartc.rpdb.multiple-links.html My problem (I think) is that somehow the router will randomly choose incorrect routing paths for different hosts, for example: on my workstation (192.168.1.20), I ssh to a server I have on an

Hello all, I am going through the LARTC howto to understand how the iproute2 works. But some concepts like Policy Routing, RPDB etc are not clear to me. I am pretty new to iproute, beeing using route command for long... From what I understand 1. rules (ip rule) tell how to select packets for routing and route (ip route) tell where to route the selected packets. 2. A collection of rules is

Hello all, I do not read C very well (especially kernel C). Though I have tried to muddle my way through an understanding of what''s going on in fib_hash.c, fib_rules.c, and route.c, I have not succeeded to my satisfaction, hence my post. I''m trying to document the general process of route selection, and have come up with the following overview. Could somebody point out any

I have two adsl lines on my linux firewall box and i want to do some load balance between them...i tried a lot of different things, but it isn´t working...Following the instructions of http://lartc.org/howto/lartc.rpdb.multiple-links.html i used the configuration above. using "iptraf" I can see some few packets using the ppp1 connection, but almost all the packets use ppp0 connection.

Hi, I''m sorry for "novice"-level question, but I hope your expert advice will save me many painful hours running after my own tail... Let assume I have Linux box with eth0, eth1 and eth2 interfaces. Each one has IP assigned from different network. By default, IP address associated with eth0 is chosen as default routing. My application creates thee TCP sockets and explicitly

On Tue, Jan 03, 2006 at 11:28:47AM +0100, <Alpt>: ~> On Sun, Dec 25, 2005 at 11:29:21AM +0100, <Alpt>: ~> ~> The multipath code creates new cached routes. Since ~> ~> after connect the socket is "connected", i.e. saddr and ~> ~> daddr are known and they are always provided when resolving ~> ~> route ~> ~> ~> ~> So, the connected

Hello all, For some years now, I've been using Thunderbird for dovecot. I am not very satisfied with t/b so I thought of using m/s outlook but then I thought that I want to distance my clients from office products. I have a newly created dovecot installation on a very small site. Three nodes, all x86 Windows 7 professional with an ubuntu v14.04 server (x86 again) running dovecot 1.2.17.

Op 16-7-2016 om 18:12 schreef Charles Marcus: > > On July 16, 2016 4:02:33 AM EDT, Spyros Tsiolis <stsiol at yahoo.co.uk> wrote: >> Since I have quite some experiece with thunderbird, I know most of >> its shortcomings > Care to elaborate? Thunderbird is far from perfect, but is by far the best IMAP client available. > > Most times you can work around supposed

Hi, I''ve set up a Linux box with redhat on to act as an internet gateway and I''m running into a few problems. Its got two adsl modems connected to it, both connected to seperate 512kbs lines. Now I''ve followed the simple source routing in the advanced routing howto to the letter but it doesnt work. I''ve got it autoconnecting on startup and redhat puts ppp1

Does render_partial work within a RXML file? I am attempting the following: xml.users do for user in @users render_partial ''user'', user end end All that is output is: <user> </user> Without any exception or anything to indicate that I''m doing something wrong. Does anyone have any experiece with this? Josh

Hi, this is my first post to the list. I have googled a lot, and still cannot find a proper solution. I hope someone here will be able to shed some light on my doubts. I have set up a firewall using kernel 2.6.15 (Debian) that does NAT for 100 clients, and uses two different ISPs, using the howto found at http://lartc.org/howto/lartc.rpdb.multiple-links.html. I have *not*

Hi all I would like to know what happens with a dead router in a multipath configuration like the one presented http://lartc.org/howto/lartc.rpdb.multiple-links.html Do i need to monitor dead routers and reconfigure ? Guillermo

hi, i wann to make multigateway routing and i read ur how to on http://lartc.org/howto/lartc.rpdb.multiple-links.html and create some rules which i am sending u, but with this rules i am not able to do multigateway routing on my linux router so plz help me out. thanks the rules are given below IF0=eth0 IF1=eth1 IF2=eth2 IP1=192.168.1.2 IP2=61.246.243.86 P1=192.168.1.1 P2=61.246.243.81

> > Jason Brown wrote: > | Anyone have experiece with polycom phones? > | > | I am experiencing a really weird problem. In an office where I have > | the following extensions: > | On the Polycom phones, when I want to dial from extension > 100 to any > | extension 120 or above, or dial out, it dials just fine. If > I want to > | dial from extension 100 to

Hello All, I have a linux box running with three NIC''s, I have used brctl tool to configure this box as a bridge, i have given it ONE logical ipaddres, Every thing is working fine, but now i am required to configure the same bridge as a LOAD BALANCER.... On some googling i found the following link http://lartc.org/howto/lartc.rpdb.multiple-links.html This HOWTO requires me to have one

--------------eth0---80.48.56.70---------- -------------80.48.56.65 ISP | my | router1 | | | linux | | | router2 ------------eth1---192.168.200.10----- ----------------192.168.1.1 ISP I''ve two ip from my isp one public and one internal. ISP have two routers router1 is gw for public ip and router2 is gw for internal

Hello, I started off by reading the Linux Advanced Routing & Traffic Control Howto, then searched a bit around the web. I see many documents discussing these matters with kernel 2.2.x but they are quite old, something around 1998-2000. I have some questions but I might as well start by exposing my setup to clarify things. I have a couple of internet links: a leased line of 256kbit/s and an

I set up this config: +------+ -+ ISP1 +--+ +------+ | +-------+ +--+ linux | +------+ | +-------+ -+ ISP2 +--+ +------+ No problem. Standard setup with two ISP''s. Both routed subnets. Default gateway is ISP1. No magic here. Now I put a server behind the Linux box. I want the server to be reachable on an /extra/ IP in the routed subnet of ISP2. +------+ -+ ISP1

Been running this for quite a while and noticed that have intermittent problems getting out. Find that if I ping the same site from 2 computers it may work on one and fail on the other. Also was surprised that some time they are going out different interfaces at the same time. Seems to work all the time from the firewall. Running 2.6.10 kernel with the multipath routing patches on a debian

I have two ISP links that I am trying to firewall through a Linux Server, I have been following http://lartc.org/howto/lartc.rpdb.multiple-links.html and I can not seem to get it working. Do you have to NAT the incoming packets for this to work correctly?