similar to: Direct pickup

Hi! i have a problem with the PICKUPMARK of the Pickup() application. E.g. A calls B. B is ringing. C wants to pickup B. To make this work with PICKUPMARK I have to add the variable PICKUPMARK to B. But how can I do this? B is just created inside the Dial() application. thanks klaus PS: If you wonder why I use the PICKUPMARK - Pickup(exten) does not work for me as the incoming calls will

Hi, I'm banging my head over this. Usually, I'm using a SIP hardphone feature called "Call Pickup Starcode" to enhance BLF with Directed Call Pickup : basically, SIP hardphone (here a Thomson ST2030S) is configured to send an INVITE message whenever a BLF is pressed while blinking. The INVITE is build with the extension number (attached to the BLF that was blinking and pressed)

Hi All, I'm using Asterisk 1.2.14 under openSuSE 10.2 with kernel 2.6.18. I have Wildcard TDM400P card and D-Link DPH-120S and DPH-140S SIP phones. I would like to be able to pickup ringing extention from any SIP phone using Pickup() application. from my dial plan: [incoming] exten => s,1,Dial(SIP/somebody1|60|tTrR) [internal] include => outbound-local include => parkedcalls

I cannot use CVS, is there anoyher way to use direct pickup ? Thanks again Giordano ________________________________ Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Alexander Lopez Inviato: venerd? 16 settembre 2005 17.53 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: RE: [Asterisk-Users] direct sip call

Hey there list ! I'm receiving negative feedback when people try to pickup another ringing phone by pressing *8 on there own Grandstream device. These are my setting that should make pickup possible : all my sip-clients (Grandstream) have this in their config (sip.conf) : callgroup=1 pickupgroup=1 canreinvite=no qualify=yes So they are all in the same pickupgroup... This the

I've tried the directed pickup like explained in http://www.voip-info.org/wiki-PBX+Call+Pickup but I've got no way doing it work. When I call the ringing phone it use the second line of that phone Group call pickup works perfectly. Is there some special configuration to do to make it works? Best regards, ?ric

Hello, I can use directed call pickup using pickup application (between sip, iax, skinny cals), but unable to pickup call that is ringing on phone behind h323 gateway (using original h323 channel in asterisk), is this even suported? thx PJ exten => _*7.,1,Pickup(${EXTEN:2}) console log, when trying o pickup ringing line 324 (h323), from skinny phone (953) -- Executing

Hi, Latest SIP firmware for Polycom 601 is 3.1.6. With this, is Directed Pickup supported ? At the moment, when an extension is ringing, I can see BLF turning to solid Red but I can't see it turning to Blinking Red. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm trying to set the Pickup feature. I'm setting my extensions.conf as: exten => _*.,1,Pickup(SIP/${EXTEN:1}) but if, for example, extension 03 is ringing by a call made from extension 01, and I try to pick it up from extension 02 (by dialing *03 from extension 02), I can see in the Asterisk console (Verbosity set to 10): -- Executing Dial("SIP/01-512c",

Hi, at my Asterisk box, I have a few of IAX2 phones (configured with alaw/ulaw/gsm codecs, in this order) and a PRI E1 line. In iax.conf I hav: disallow=all allow=alaw allow=ulaw allow=gsm During some incoming call, I read at console: -- Executing Dial("Zap/2-1", "IAX2/215|20|TtwW") in new stack -- Called 215 -- Call accepted by 10.97.1.7 (format ulaw) --

Hi, i'm working about sip call pick and *8 works very fine but I pickup ringing phone on the same group. What happen if I have more than one ringing call? I tryied *8#exten, *8eten# but it doesn't wotk. Is it correct? How it does work ? Thanks Giordano -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi to all, i already searched the archive without finding a solution to my problem. I have asterisk installation 1.2.18 to support multiple virtiual PBXs. I use SIP peer in the format <ID>-<EXT> to let every virtual PBX to share the same numbers of EXT. Ex. (PBX ID 10 Extensions) 10-101 10-102 10-103 (PBX ID 20 Extensions) 20-101 20-102 20-103 I use some rules in the dialplan to

On one installation (* 1.2.13) Pickup doesn't work. This is what I have in extensions.conf exten => _**2X,1,Pickup(${EXTEN:2}&8${EXTEN:3}&t&uevents) exten => _**2X,n,Hangup This is what I get on CLI -- Executing NoOp("mISDN/3-1", "incoming-beronet 80 - dolazni poziv s broja 270248") in new stack -- Executing LookupCIDName("mISDN/3-1",

Hi all, how can I pickup a call from a queue? Which context parameter do I have to specify? The context that calls the queues application is ext-queues. This is what I tried so long (777 is the extension of the queue I want to pickup from): exten => _**ZXX,1,Noop(Attempt to Pickup ${EXTEN:2} by ${CALLERID(num)}) exten => _**ZXX,n,Pickup(${EXTEN:2}@from-did-direct) exten =>

I'm having trouble with call pickups. Suppose ring group is 100 and has extensions 101 and 102. Someone calls 100, 101 rings and 102 wants to pick the call up. If 102 dials **100, call pickup works. If 102 dials **101, call pickup fails. In my dialplan I have: exten => **101,1,NoOp(pickup extension) exten => **101,n,Pickup(101) exten => **101,n,NoOp(pickup group) exten =>

Hi all, There are a lot of posts around the web about my question; unfortunately I have not been able to get any of the solutions to work. I'm using Asterisk 1.6.2.8 under CentOS 5.5. I'm trying to get call pickup working for the secretaries that monitor their bosses' phones. The BLF and the speed dial works great on the Linksys phones. Call pickup is the problem. My features.conf

Hello all Sorry for the repost, but I believe this is essential for Aastra phones to use directed pickup with BLF in 1.2 (and it's still experimental in 1.4 I think). pickup-mgernoth-2006-07-28.patch.txt If anyone knows otherwise than that this is still required in latest 1.2 or 1.4 please reply with success/failure stories. Any info would be appreciated. We can get directed BLF pickup

Hello Folks. I'm wondering if anyone has any helpful hints. I recently upgraded to 1.4.11, and I'm having problems with pickup, both directed, and the pickup feature. My server is on the public internet, and all phones are behind a NAT router, somewhere else on the public internet. When a ringing phone is picked up by another phone, you have audio for a few seconds, then the call is

Hi, sorry for annoying question; i read http://www.voip-info.org/tiki-index.php?page=PBX%20Call%20Pickup without understanding: 1. how to add an ext. to a pickup group (ie:. how to populate pickup group) 2. how 'Directed pickup' does work? "You dial the pickup number and your extension, and the call will only transfer if it is your extension" should i digit something like

I'm trying to pick up a ringing SIP phone (203) across the office with exten => *9,1,Pickup(783743) where 783743 is the local part of the number that our ISDN works on. I tried all of these first: exten => *9,1,Pickup(203) exten => *9,1,Pickup(SIP/203) exten => *9,1,Pickup(203@internal) and got a "declined" message back from my phone (snom 300), so I then