similar to: ZAP <--> sip(polycom301) can not hear each other

I cant seem to get outgoing calls to be placed properly .. No matter what I try I get an error from the PSTN company saying that the "call can not be completed as dialed" or "you need to dial a one..." The asterisk debugging seems to show the correct number being dialed out of the zap interface... the "9" is being stripped and there is a "1" where it is

I am using Polycom 501s with asterisk 1.2.4. When transfering to call parking wih "#1" -> 700 the user is able to hear asterisk tell him what extension the call was parked on. However, when I press "transfer" -> blind -> 700 . The user is not able to hear what extension the call was parked on. It seems like the polycom is hanging up before asterisk is able to

Several times a day I get this meesage scrolling on one of our asterisk boxes: Mar 13 14:43:47 NOTICE[11264]: channel.c:1911 ast_read: Dropping incompatible voice frame on Local/928@sanset-d88e,2 of format slin since our native format has changed to alaw Mar 13 14:43:47 NOTICE[11264]: channel.c:1911 ast_read: Dropping incompatible voice frame on Local/928@sanset-d88e,2 of format slin since our

The following is my dialplan for outgoing international call. What I want are: - when people dial 9011604xxxxxxx , 9011605xxxxxxx, 90114411xxxxxxx, 90114421xxxxxxx, use voipstunt to dial out - otherwise, use my pstn to dial out. What I've found is when i dial 9011604xxxxxxx , 9011605xxxxxxx, 90114411xxxxxxx, 90114421xxxxxxx, it always use the pstn to dial out. Anything wrong with my dial

Hey, all. I'm trying to set my CID such that, internally, I see a four-digit extension (which is also handy when checking VM), but externally, I see the full 10-digit number. So I plugged these lines into my extensions.conf: exten => _XXXXXXX,1,GotoIf($[ ${CALLERIDNUM} != 1625]?4:2) exten => _XXXXXXX,2,Set(CALLERIDNUM=6031234${CALLERIDNUM:1}) exten =>

I am up to post 5 on my step-by-step but I hit a bit of a snag and so far my searches have failed me, I hope someone can help. (By the way, I added an asterisk index for quick navigation on the blog http://qvlweb.blogspot.com/2009/04/asterisk-pbx-install-index.html.) Here is the snag and I am hoping for a little help from the collective. Inbound I have 2 different numbers. I can call in on both

Hello all: For fun, I am learning about Asterisk, and trying to get Asterisk working at my house. I installed Asterisk@Home. It seems to be functioning fine. I installed a couple of softphones, and have them registered with Asterisk. I actually work for a CLEC, and I have registered my Asterisk box with SER (which I don't begin to understand yet) at the office. In order to try to

Hi, I am setting up an asterisk server for testing purposes and cannot get voicemail to work at all. My host OS is Linux From Scratch 6.3 and the asterisk software versions I built are zaptel-1.4.5.1 and asterisk-1.4.12. I am using the Ekiga softphone on my Ubuntu desktop machine. My asterisk server and client phone are on different computers but are on the same LAN, i.e. no NAT. I have an

Using the latest SVN of zaptel and asterisk, I can no longer receive incoming analog calls. The caller just hears it ringing but Asterisk doesn't pick up. I am seeing these error messages: [Apr 9 09:38:02] WARNING[16564]: chan_zap.c:6470 ss_thread: CallerID returned with error on channel 'Zap/2-1' [Apr 9 09:38:50] WARNING[16570]: chan_zap.c:6470 ss_thread: CallerID

Hi, I have Asterisk 1.4.18 and I have been running call center queues on it. Today it suddenly stopped adding inbound calls to queues. I am facing with following error: app_queue.c:3939 queue_exec: unable to join queue "myqueue" In extension file: Queue(myqueue|t|||120) And my agents are joining in following

Hi list, I am running TDM11b + Asterisk-1.4.9 + Zaptel-1.4.4 + Libpri-1.4.1 on CentOS 5. I am having trouble to make my simple IVR extension work, here is relevant config: zapata.conf ---- context=incoming signalling=fxs_ks channel => 4 context=internal signalling=fxo_ks channel => 1 ----- extensions.conf: ---- [office] exten => s,1,Dial(Zap/1,30) [home] exten =>

Hi, I'm running Asterisk 1.0.8 on Gentoo, with an X100P (clone) card, and I'm having problems with Caller ID. I have run clidtest, and it seems happy enough, returning:- server clidtest # ./clidtest /dev/zap/1 Number: 0412222222, Name: MOBILE (that number's fake.) However, I'm not getting the caller ID passed through with *. Sometimes I get a "failed checksum" like

Can anyone tell me what this message means? Got event 17 (Polarity Reversal)... I'm running DAHDI 2.0 with a TDM401 card. Asterisk version 1.6.0. It appears that I get this Polarity Reversal each time an inbound call hangs up. This results in another ring, but no one is there. It appears as an unknown caller, but I believe its a phantom. Thanks, Jim [Oct 10 12:47:54] NOTICE[6669]:

hi all, We have a TDM400 card with 4 wfo modules. now the modules load fine and when i start asterisk with on phone line connected it just starts spewing these messages: -- Starting simple switch on 'Zap/4-1' Jan 13 12:59:47 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2 (Ring/Answered)... Jan 13 12:59:47 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2 (Ring/Answered)...

I am trying to configure Asterisk for BSNL, india network. I have successfully configured it for outgoing calls. When any outside number make any call to trunk then it receives the call properly but when the call is disconnected by inside extension then outside phone does not get a busy tone. Asterisk incoming call log: -- Executing [s at incoming:2] Dial("Zap/4-1", "Zap/1")

Hi, I have problems while trying to dial from simple analog phone that attached to my TDM400P card. No matter which number i press i immediately get a congestion tone. when calling from outside (e.g cellphone )to the line on port 4 and pressing extension #123 everything works fine and i manage to make a connection. I've plugged on port(Zap) 4 the analog line and on port 1 the phone.

Aloha, I'm finishing up the final touches on this install, and have run into an odd problem. I can't seem to get Caller ID on the analog phone lines working. It's a Digium AEX 410 card. I have Verbose set and a line to print the CID: I have usecallerid=yes and callerid=asreceived set in both chan_dahdi.conf and users.conf [analog] include=>default exten =>

I have 1 x100p. Caller id works fine with the beta1 release. Cvshead releases fail with a combination of checksum and ss_thread errors? I'm concerned when beta2 or the 1.2 release comes out it will not work. I have been through the configs I can't find and changes that need to be made to get CVSHEAD to work. Thanks John Hill

Sorry if this is a daft question but when a PSTN call comes in on my X100P the console shows the following; NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)... NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)... NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)...

pstn incoming on a TDM400P, sometimes i* won't answer, going into a loop like this: -- Starting simple switch on 'DAHDI/4-1' [Jan 16 10:38:55] NOTICE[5808]: chan_dahdi.c:7130 ss_thread: Got event 18 (Ring Begin)... [Jan 16 10:38:57] NOTICE[5808]: chan_dahdi.c:7130 ss_thread: Got event 2 (Ring/Answered)... [Jan 16 10:38:57] NOTICE[5808]: chan_dahdi.c:7299 ss_thread: MWI: Channel 4