similar to: New GXP-2000 Beta firmware available

Version - Asterisk SVN-trunk-r12793M (1.2.4) I have 4 Grandstream GXP 2000 phones configured. However at the moment, I have had to disable BLF, Hints, and Call Limiting due to an extremely annoying bug which seems to make the phones channels "lock" in busy after a call has been hungup. If I do a show hints after say extension 200 has hung up I get the following -= Registered

Hi all Slightly OT but I know a lot of GS experts hang out here - I just upgraded a GXP-2000 to firmware 1.0.1.13 to try out the BLF functionality with Asterisk (which so far works as expected), but as a side-effect the phone won't sync with an NTP server - I've tried different server names (time.nist.gov and pool.ntp.org) and IPs in the config, but it refuses to update the time on

FYI, spoke with Grandstream this morning, the GXP-2000 release has been delayed again. Looking like April now before these hit the street. -- Cory Andrews Senior Partner VOIPSupply.com +++++++++++++ V: 800.398.VOIP X22 F: 716.630.1548 E: Cory@VOIPSupply.com

We are connecting the GXP2000 to a Cisco POE switch 3650, it the default mode at 15.4 for each phone the phones power up but we can only have 24 on a 48 port switch, when we adjust the setting to 7000 (which is what we calculate the phone to use) they don't power up ... we tried all the power settings from 7000 up to 154000 but it only powers up at 15.4, we should be able to get almost 48

Hi there, I am running Asterisk 1.2. I have a Grandstream GXP2000 and Aastra 9133i with BLF/Speedial configured for other extensions. The hint's are all configured in extensions.conf and it seems to work as it is supposed to until I reload the configuration in Asterisk or reboot the server. Then neither phone displays the BLF of other extensions until I reboot the phone. It continues

I am trying to set up the BLF on a GXP2000. Currently what I have is extensions.conf: [globals] polycom430=SIP/101 [internal] exten => 101,1,Macro(voicemail,${polycom430}) [macro-voicemail] exten => s,1,Dial(${ARG1},10,tT) exten => s,2,VoiceMail(u${MACRO_EXTEN}@default ) exten => s,102,VoiceMail(b${MACRO_EXTEN}@default) [ext-local-custom] exten => 101,hint,${polycom430}

Hey everyone, I was wondering if anyone is able to help me with a solution. I have a small office set up with GXP-2000 phones and the one thing I cannot get to work is them being able to transfer a caller directly to another person's voicemail. If I have a dial tone (and not on a call), I can simply type *12 to go directly into extension 12's voicemail. However, when I use

I have a function *1 that starts and stops recording in a call. I use a function so I can use MixMonitor. It works well, however I would like to make it a little more integrated for my users. We have GXP 200 hardphones. So far I've been able to configure a softkey using the speeddial option to dial *1 during a call. I also have setup another key to monitor the status of recording (on/off)

I have 5 GXP 2000's with firmware 1.1.4.25 running with Asterisk 1.4.13. Is anyone else getting the following error in the asterisk console: [Oct 22 11:39:01] WARNING[7100]: rtp.c:1142 ast_rtp_read: RTP Read too short every couple of seconds when a handset is in a call? I didn't notice this happening when I was using an older GXP2000 with the same firmware (doesn't mean that it

Actually, I have tested this here with an Aastra 9133i and an Asterisk@Home server, and the 9133i will re-subscribe on its own after an Asterisk reboot, if you wait long enough. It took on the order of an hour to do so. Of course, a phone reboot will get it done faster, if necessary, but it _will_ eventually re-subscribe on its own. > Thanks Olle, > > So am I to understand that you

I tried 1.0.1.12, 1.0.1.13 and now 1.0.2.13 on the GXP2000. I doubt it's the firmware if it is happening on two completely different phones. I read of a bug in Asterisk that exhibited this exact behaviour that was apparently fixed in Asterisk 1.2.0 as far as I can tell. http://bugs.digium.com/view.php?id=3644 > -----Original Message----- > From: stoffell [mailto:stoffell@gmail.com]

Actually, I have tested this here with an Aastra 9133i and an Asterisk@Home server, and the 9133i will re-subscribe on its own after an Asterisk reboot, if you wait long enough. It took on the order of an hour to do so. Of course, a phone reboot will get it done faster, if necessary, but it _will_ eventually re-subscribe on its own. In another thread, I've seen a response that the GXP2000

Can anyone who has used both comment on the pros and cons ? Need to buy about 30 of these, for a small company with limited IT support. Julian ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email

Hi i use a lot of Grandstream GXP2000 with BLF How to set up on the same key BLF blinking call interception? So that someone is able to take a call that is destinated to another user phone Thanks bye

I had provisioning via tftp working on this phone. I have verified that after the firmware upgrade, it contacts the tftp server and downloads the cfgMACADDR file, and the ring/etc files successfully. Unfortunately, changes made to the config file don't make it to the phone (SIP account info/server info, etc). The script that I am using to generate the binary files is loosely based on

After working with the Grandstream GXP 2000 series phones, I have decided that I am quite unhappy with their problems, both voice quality, volume, features and others. For their price now, there are plenty of phones to choose from as well. So subjectively what would be the best Hardphone for a small/medium business with multiple line support, BLF, etc. Are the Cisco 7960 the best of the

Hi, I'd set the daylight saving option to yes on all the GXP-2000 phones, but apparantly it doesn't move it an hour back on last sunday of October. So now I am stuck will all the phones showing the wrong time. Isn't there an option so that it'll automatically update daylight savings? Thanks -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was

Stopping and restarting Asterisk will lose the hints, then you will have to wait until the phone registers again. With 1.2.7.1 a reload shouldn't lose anything. Change the register time on the phones to something less that 60 minutes if it's a big problem. Instead of factory defaulting the phones you might find a simple restart will re-register the phone and BLF will work on the phone.

Is it possible to use hints from a realtime source like a db or curl ? I was looking at the grandstream GXP2000 Expansion Module (EXT) which has 56 fully programmable keys that work with BLF. You can daisy-chain 2 of these together to get 112 keys, plus the 18 on the 2010 phone to give 130 potential blfs. What I was wanting to do was to use the BLF as a type of agent monitor as well - when

One of our clients is using a Grandstream GXP2000 with an attendant console. We have used the same phone with past clients successfully however this particular operator processes around 200 calls a hours and the GXP2000 for sure does not like the quick line shuffling and call volume. We get the following problems randomly: 1. menu stops working 2. transfer key stops working 3. Line 1 LED gets