similar to: Re: Asterisk-Users Digest, Vol 18, Issue 181

Good evening, I am just getting started with Asterisk. I have it installed, and I believe I am on the right track, overall, to get it working, but I can't get the linejack to answer any calls. At this point, all I'm trying to do is have Asterisk answer an inbound call on my linejack, /dev/phone0, and play a greeting or tone. I figure, once I am able to get asterisk to actually answer the

Hi everyone, I am running asterisk on red hat linux 9 box. The sound card is Intel 82801db AC' 97 audio and the module is i810_audio. It runs well with other applications like xmms and the standard tests deliver a sound . I have also tried to record voice and that works well too. 1-)Now when i run asterisk and i dial out an extension to play any sound there is none. The same thing

Dear ALL, Any clues or tips for the following gdb messages. [root@localhost asterisk]# uname -a Linux localhost 2.4.22-1.2115.nptlsmp #1 SMP Wed Oct 29 15:30:09 EST 2003 i686 i686 i386 GNU/Linux localhost*CLI> show version Asterisk CVS-HEAD-09/22/04-11:19:09 built by root@localhost on a i686 running Linux [root@localhost asterisk]# gdb asterisk core.13089 GNU gdb Red Hat Linux

I have a new asterisk install (1.0.7) - and in case it's relevant I'm not using autoload option in modules.conf. Generally all is working well. However, when I make a call from my softphone and try to leave a message, the message is cutoff after a few seconds (whenever I pause for 1 second between words). Strangely, when I use an analog phone connected to my ATA, I can record as long as

I have a pretty basic Mandrake 10.2 w/KDE 3.2 and I installed Asterisk-1.0.1-2mdk. I installed the source of main and contrib from ftp, so at the install time I accepted all the packages needed to be installed too. The installation went smooth, but when I try to execute asterisk (#asterisk -vvv) I encounter few warnings I end with an error. At this point I didn't touch any conf file, I was

i'm having this error message when trying to run the agents-feature Sep 2 17:37:40 WARNING[10445]: pbx.c:1645 pbx_extension_helper: No application 'AgentsLogin' for extension (from-internal, 28, 1) while chan_agent.so is beeing loaded i still don't seem to have access to the commands like agentlogin or agentcallbacklogin. my agents.conf and queues.conf are configured correctly

Currently we have problems with our asterisk server connect with an Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. The Diva server is running in version 7.5 Can someone help us in reolving the errors with incoming calls? When we try to call to an extension we get these messages in the CLI: -- creating pipe for

Hi, I have upgraded my PBX to Asterisk 1.2.5 , previously I was using Asterisk 1.0.9, and Every thing was working fine ,But now voice mail is not working. The error I am receiving in log files is like following, WARNING[2413] app_voicemail.c: No entry in voicemail config file for '12' I have searched for solution a lot can Any one of you let me know how can I solve this issue

Hi, Ive been struggling with asterisk for a few days now. I understand pretty much how it works and how to tie things together (SIP -> SIP internally works fine etc), but just cannot get asterisk to work with an X100P clone (its a Ambient MD3200, if that means anything to you guys). I have tried (initially) asterisk 1.07 with zaptel 1.07, and now Asterisk CVS-HEAD with zaptel cvs. Both give

Hi Guys, I've attempted to get this moh-native thing to work with no success. I've reviewed wiki, mantis and e-mail postings and I'm confused. The latest I've read is native moh should be in asterisk-addons in format_mp3, but what version will it work with? I've tried asterisk 1.0.1, 1.0.5, addons 1.0.1, 1.0.4 and also -r stable CVS. I followed the wiki example with

Hi! I just installed Asterisk 0.4.0 with all the default options, and the configuration samples it has. When I try to dial from an h323 client (gnomemeeting) I get this message on the messages file: Jun 19 11:48:45 WARNING[15375]: File file.c, Line 410 (ast_openstream): File demo-congrats does not exist in any format Jun 19 11:48:45 WARNING[15375]: File file.c, Line 553 (ast_streamfile):

Looking at the error I tried moving chan_modem* out of the modules folder and asterisk started and its working again... Not sure what changed in the chan_modem_i4l.so but removing it from the folder fixed my problem. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Eric Hall Sent: Sunday, January 23, 2005

Hi, I have read the wiki entries on IAX(2), but I'm afraid, it still have some questions: I have a working connection between two Asterisk-Servers (Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k on Debian 3.1) via IAX. Does this connection work with IAX or IAX2? When I try to load chan_iax2.so, I get the error message chan_iax2.so]Oct 11 10:09:52 WARNING[2288]: loader.c:258 ast_load_resource:

Hello group I just update to the newest CVS now I'm not able to get asterisk to start. No error during the make or make install I did a make clean before the make;make install Any help would be great!!!! Here is the output asterisk -vvvvvgcd Parsing /etc/asterisk/asterisk.conf Parsing /etc/asterisk/extconfig.conf == Binding realtime_ext to mysql/realtime/extensions_table == Binding

I used: cvs checkout zaptel libpri asterisk asterisk-addons asterisk-sounds iaxyprov astcc and in the same order I try to compile it. Asterisk ends with the lines below. It complains of a newer libpri, but I just did it a step before! What do I miss? chan_zap.c:62:2: #error "You need newer libpri" chan_zap.c:128: error: parse error before '<<' token chan_zap.c:133:1:

When I try to connect to * using a Cisco ATA 188 configured with a MGPC firmware (v3.1.1), I just keep getting this message every 30 seconds or so : May 10 10:08:21 NOTICE[7913]: chan_mgcp.c:1509 find_subchannel: Gateway '192.168.1.27' (and thus its endpoint '*') does not exist Using tcpdump, I have checked that the ATA188 (with IP 192.168.1.27 and port 2427) sends UDP packets to

Im trying to add mysql billing to my * box, running *1.0.2 on Debian I follow the instructions at http://www.voip-info.org/wiki-Asterisk+cdr+mysql and download the asterisk-addons via cvs When I get to the "make" part, the errors I get indicate a path somewhere is wrong. I can't for the life of me work out exactly where it is. Any help would be muchly appreciated!?!

Hello maybe someone can help me? I did the CVS checkout and then compiled asterisk Then I tried to compile the addons and got the following (don't understand what's wrong at all and can't find anything about this error on google/wiki) app_addon_sql_mysql.c:164:64: macro "AST_LIST_REMOVE" requires 4 arguments, but only 3 given app_addon_sql_mysql.c: In function

Hi, Trying to compile asterisk-addons 1.2.5 on Centos 4.4 produces this: Note: MySQL libraries are installed and the structure is as follows: /usr/src/astsources/asterisk-1.2.13 /usr/src/astsources/asterisk-addons-1.2.5 in /usr/src/astsources/asterisk-addons-1.2.5 I do: make clean make and the output is: ./mkdep -fPIC -I../asterisk -D_GNU_SOURCE -I/usr/include/mysql `ls *.c`

Hi list, Now that I've got my Asterisk server to recognize my HFC-PCI card, I've run into some serious problems. The first thing I noticed was this message that would show up every five seconds on the CLI: Dec 27 15:46:42 WARNING[12484]: chan_zap.c:2512 pri_find_dchan: No D-channels available! Using Primary channel 3 as D-channel anyway! == Primary D-Channel on span 1 down