similar to: ATA's ???

I have installed the sipTAPI from http://sourceforge.net/projects/siptapi/ when I use user names like joash.herbrink in Asterisk, it is not working when I change the sip username to my internal extension, like 1006, it works fine. Anybody any idea as to why this is? met vriendelijke groet, Joash Herbrink Technical Consultant "Control the flow" De Kahuna groep

Hi there, I have bought 70 sipura 841 phones for a customer of mine. When following the mass provisioning guide in the admin manual for the sipura, I see it download the spa841.cfg file from my tftp server Sometimes the phone also downloads is phone specific file via tftp, and it works okay then. But, after a reboot of the phone, it is very very likely that it won't startup

Why is using ulaw or alaw an unlikely scenario? I wouldn't use anything but ulaw\alaw. The Bells can compete on price and will if they have to. Where they CAN'T compete is quality. If there were something better than 711, I'd offer that. Well, there is 722, but not many things support it. ---- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original

Phil, It sounds like your carrier is just using a channel bank to split off six of your E1 channels into analog FXO ports. You will want this for fax lines, security systems, and dialup connections since doing this over VoIP/Asterisk can be problematic. It is best to keep these lines out of the PBX. I have done several implementations on IBM x305 and x306 servers and they work great. I

I am trying to use a the SIP tapi from www.enum.at <http://www.enum.at/> . This works fine from all kinds of applications which support TAPI, like outlook and Dialer Pro. However when making tapi controlled calls, the signaling to and from PSTN seems to fail. I have used the digium hardware ISDN PRI boards, but also a SIP gateway. Both result in a audio message from asterisk

On Thu, 2006-03-02 at 11:42 -0600, Jordan Novak wrote: > Does anyone have a way to do wake calls? > > > > Jordan Novak > > Communications Technician > > Logistics Health Inc. You could use cron and /var/spool/asterisk/outgoing scripts to dial numbers, etc... > Can you elaborate, I am fairly new to Linux and a phone guy to boot. I am looking for a way for the

Hi, You can try ChanSpy http://www.voip-info.org/wiki/view/Asterisk+cmd+ChanSpy. Idris _____ From: phil.dawson@marnock.com [mailto:phil.dawson@marnock.com] Sent: Wednesday, June 21, 2006 12:23 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Monitor a particular SIP call for training purposes Hi, I've been asked if it is possible to allow a user to

Can someone give me an idea of the processor power I will need for 1 x TDM240 with 2xquad FXO's and 8 sip phones/ATA's on a quite 100Mbit LAN. The machine we have available of hand is a P4 1GHz with 768MB RAM. Tx Marnus van Niekerk -- "Opportunity is missed by most people because it is dressed in overalls and looks like work." Thomas Alva Edison - Inventor of 1093

We have a Vegastream 400 connected to a digium Quad PRI card in an asterisk server, for the T.38 faxing here. Problem is that there are too many clockslips on it (and they get logged by asterisk as HDLC aborts). I've double checked the configuration on both sides, replaced the cable, tried different ports etc. It all lead to no resolution for it. Is there somebody on the list who has a

I know the subject of faxing has been covered in some detail, but I was wondering if anyone has a hardware configuration similar to ours that has faxes working successfully and would be willing to share any settings/insight. We are unable to fax reliably with a Sipura 2100 connected to Asterisk. We do not route calls over the Internet and our network has very low latency. The Asterisk

I wonder if anyone can help me? Am trying to terminate to H323 Vegastream. I'm using OH323 with little success. I can dial out and answer but voip end just keepings ringing and ringing. Thanks for any help. Neil Config file: [general] listenAddress=ALL listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=no h245Tunnelling=no h245inSetup=no jitterMax=100

I am trying to configure a VegaStream 50 FXO to work with asterisk. The problem that I am having is that the VegaStream does not support incoming registration from asterisk. VegaStream only allows outbound registration. My question is does asterisk allow incoming registration from an FXO? If yes how? Or better yet, has anybody been able to make the VegaStream FXO work with asterisk? According

I'm currently looking to interconnect my Asterisk PBX system with the PSTN via a digital PRI/T1. I know a multitude of options exist for internal PCI cards (Digium/Sangoma/Rhino), I was wondering if anyone has any experience or recommendations of external PRI media gateways that support SIP. So far I've found: VegaStream Vega 400 Audiocodes Mediant 2000 MediaTrix 1531 However they are

I have a couple of devices that need an analog modem to communicate outside of our Asterisk system. Most FXS gateways don't seem to support this... I have a stack of Sipura 2002's that are, AFAIK, worthless for this purpose. I've heard that Digium's IAXy FXS will work with modems, but I can't find any reference to that in their documentation. There is also the

Hi all, We have several sipura 3000's working well for outbound calls, however the issue we have is that when calls are sent to the Sipura with Dial(SIP/${EXTEN:0}@sipura1) the Sipura does a SIP answer immediately and then proceeds with the call "in band" therefore sending dialing sounds back to the caller. Other SIP gateways we have notably the Vegastream and others do not do a SIP

I've been reading the Linejack strikes again messages, and have another Newbie question is it possible to use a Voip Product as a Dialout line for * ? I have a Vegastream 100 Voip to PRI. box. With * can I use that as a Dialout / dialin box? The Vega100 does either sip or h.323. Thanks. Bradley Greep

We recently had a customer install that went horribly wrong. Serious echo (pots lines into a cac cb) that, although * did a good job getting rid of alot of it, could not get rid of it all. We tried everything, every canceller, gain setting, etc... combination possible to no avail. Both the vegastream and mediatrix boxes also could not get rid of all of the echo. So, on an off chance, we

Has anyone here using VegaStream FXO with asterisk? I just got the Vega 50 10 FXO and all I could manage by now is to get outgoing calls. Any pointers and a script sample would be appreciated. Thanks, Issac

Hi, I'm looking for an ISDN FXS for home use (so the solution has to be affordable :) Let me tell you exactly what I want to do first. I want to connect a regular home ISDN phonesystem (does not exist yet so I'm flexible with that, too) to the ISDN-PSTN and Asterisk at the same time. I want to be able to place calls through the ISDN-PSTN as well as through asterisk eg by dialing 0XXXXXX

I have installed several call centers in the netherlands with the eyebeam softphone (from the counterpath guys) It is not free, but very stable, and pretty easy to use. It works great with asterisk (specially the presence option, so agents can see whether somebody is actually ready to take a call). In combination with sennheiser headset CC series, I have had no complaints. We also use a tapi