similar to: Newer version of Zaptel with 1.0 branch of *

I'm a complete Asterisk novice and have an installation based on the Asterisk@HomeCD. I've installed my TDM400P with 2 x FXO & 2 x FXS, but every time I try to dial out, I get a message "No circuits available". Can someone confirm the pinouts for connecting the FXO's to a UK BT Line - I have RJ11 connectors on the back of my TDM400P card, so ideally I'd like to

Hi all, is it possible to bridge a call between a Junghanns quadBRI card and a TDM400 in the same server? It should be I think, -- I am trying this and when an incoming call comes in, it hangs both up at the moment the bridge is attempted (and a subsequent 'qozap: dropped audio' error is show in the /var/log/messages) Any thoughts appreciated -- I've seen posts, but no clear

> > > Hi, > > > I checked by changing to from-zaptel, but no luck yet. Pls guide me on > this. > > Regards, > vudura senadeera > > > ------------------------------ > > > > Message: 9 > > Date: Fri, 19 Jan 2007 16:47:18 -0000 > > From: "Robert Jenkins" < raj@jrw.co.uk> > > Subject: RE: [asterisk-users]

I've spent the last week or so troubleshooting echo problems at my Wife's business, and I've been able to clear up about 99% of the echo, but there is still a little residual echo that I can't seem to "tweak out". The users describe it as "buzzing or crackling", but what it sounds like to me is a slight echo, but just of one syllable of the word.

I have a bad echo problem on my TDM400P with one FXO module installed. I have tried a few things, such as: * setting rxgain and txgain to 0 * setting echocancelwhenbridged to no / yes * settting echocancel to 64 / no / yes * setting echocanceltraining to 800 / no / yes * MG2 echo cancellation * MARK2 echo cancellation * KB1 echo cancellation * AGGRESSIVE_SUPPRESSOR option of MARK2 Each time

Hey all, having a terrible time with asterisk-stat -- it runs, server is fine, but some of the pages don't display properly/at all --- I think this is a code problem with them, but not sure. I thought everyone loved the asterisk-stat package? See below problems. Any ideas? Areski hasn't replied to me since.... -- Chris ----- Original Message ----- From: "Chris Earle

I'm trying to use Asterisk as a PSTN simulator to run performance tests for echo cancellation algorithms. I'm using the following configuration: SIP <-----> Asterisk 1 <----> Asterisk 2 <----> Echo() Asterisk 1 and Asterisk 2 are connected using E1. Echo() is the dialplan application. The problem is the high delay using this configuration: 20 ms only in Asterisk 2.

Hello, We have an asterisk setup at our client's site using a TE205P. The line to telco is a 23 channels T1 PRI, however the line has random echo problems (about 5-10% of the calls)! Can anybody tell me if echo cancellation is really needed even at a T1 PRI to the telco? Because people keep saying when they deploy voip solution in Hong Kong using T1 PRI, there is no need of echo cancellation.

What happens if you take out the Zaptel I/F's? If it boots, you can correct whatever you did then replace them. hth -----Original Message----- From: Chris Earle (CBL) [mailto:cearle@cbltech.ca] Sent: Tuesday, February 28, 2006 7:45 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Cannot boot machine up after working on zaptel.... Hi all, hard for me to explain this, but

Hi all, Has anyone ever thought about or implemented a way to use Rails to pull content from a database and actually *generate* static html pages from view templates? I want to throw a bunch of content into a db using rails and then put all my website templates into the views dir and write the files out with the content inside. The funny thing is that the html pages Rails normally outputs to

Hello I have upgraded our asterisk box from zaptel to dhadi two weeks ago... Since, there has been quite a significant amount of echo when making a call. Only for the local outgoing call, the person on the other side doesn't hear any echo. This is with a TE-110P ISDN PRI card .. I've pretty much took the original zaptel configuration and used it as-is with the dahdi one ; to no

Hi, I've had some decent luck with the mark3 echo canceller from the zaptel driver, echos on about 20% of the calls, people I've called say I sound great now, but our side hears echos. I was wondering if there was any way to tweak the current software cancelers into using more CPU (and hopefully doing a better job, close to a hardware canceler), I only have 10 lines, and a single call

Hi all, general query here --- I'm about to set up an asterisk box for use in Japan but can't figureout if it's all ISDN there or what? I have gathered so far that the two major providers, NTT and KVH both offer ISDN lines with .......INS1500 and maybe INS64 protocols? Not sure... But I'm seeing stuff about J1 vs. T1/E1 .... so does that mean I can't use a Digium card it

Arrrrgh I hate trying to sift through all these messages and keep track of the various threads going on ......... Who else on here prefers the newsgroup/threaded approach? If you haven't already, check out news.gmane.org for mailing lists turned into newsgroups readable by news readers....... only problem being that this list requires list membership before

hi, i just installed 2 new tdm410p's on asterisk 1.4.19 with zaptel 1.4.10. They have the hardware echo cancellers. I am having an issue though, when i talk, it cuts out the other end. So for example, i called up another asterisk box and was listening to the prompts and as they were playing if i said something, it would cut out the other end. so i basically started counting and for the

Hi all, I've been working with * for a long time now, but only with analog FXS/FXO systems. I am venturing towards setting up a box in Germany now and I believe that requires a Fritz card? Do I even have to use the Fritz cards? Why not a Digium card.... We have 2 ISDN lines ( --> 6 handsets) so I'm guessing that will require 2 Fritz PCI cards (they have 1 port only). Then

Hi all, hard for me to explain this, but it keeps happening on a number of machines I attempt to upgrade zaptel, or do something to zaptel modules..... and then I reboot the machine, and for whatever reason, it hangs on loading the modules Either the install wasn't complete, the zaptel modules settings are wrong, whatever.... but the problem is now I can't get past the boot up and the

Hello, I would like to double check what Echo Cancellation my Digium Card uses. I thought I bought the little more expensive card that integrates EchoCancellation. How can I check? root at sn1:~# zaptel_hardware pci:0000:0b:08.0 wcte12xp+ d161:8000 Wildcard TE121 root at sn1:~# ztcfg -v Zaptel Version: SVN-branch-1.4-r4309 Echo Canceller: MG2 Is MG2 the correct one that I am supposed

Hi all, getting a server going wiht a few TDM400's and some phones, and some IAXys too I haven't heard any issues about AU phones being able to RING in Australia, like the problem in the UK with ring capacitors on the BT system. Are there any problems like that? Also, with the iaxy's -- they should work (and ring) in Australia right? The only hint I'm seeing around is the use

This extension http://meta.wikimedia.org/wiki/Auto_Login_via_REMOTE_USER requires web server authentication right? Correct me if I'm wrong, but this means that the contents of the User Table would have to be in the passwd file defined through the .htaccess file right? .. because it passes whatever the user authenticates on the webserver with through to the wiki/extensions scripts right?