similar to: Interrupting ring to go to voicemail pickup -- How to ring after Answer()?

Hi, I can't receive/send calls with Asterisk. Could someone please give me a few pointers on my configuration? Regards, Norman Zhang ; sip.conf [general] disallow=all allow=ulaw port=5060 bindaddr=0.0.0.0 externip=x.x.x.x localnet=192.168.22.0 mask=255.255.255.0 context=inbound-sip maxexpirey=180 defaultexpirey=160 tos=reliability srvlookup=yes register =>

Hi all, I have Asterisk running on FreeBSD 4.x and I have made configurations to sip.conf, extensions.conf and voicemail.conf. I have also setup SIP phones on two different PCs. My problem is that when one of the SIP phones logins in, the other won't. My sip.conf has: [101] type=friend host=dynamic username=101 secret=test dtmfmode=rfc2833 context=from-sip mailbox=201

Hi all, I have Asterisk running on FreeBSD 4.x and I have made configurations to sip.conf, extensions.conf and voicemail.conf. I have also setup SIP phones on two different PCs. My problem is that when one of the SIP phones logins in, the other won't. My sip.conf has: [101] type=friend host=dynamic username=101 secret=test dtmfmode=rfc2833 context=from-sip mailbox=201

Hi, I got my * working fine with FWD at office with 2 extensions, i receive calls and i can make calls thru FWD. I got also my * at home, and i connected it using auth=rsa. From my home, i can make calls using my office iax, but if i try to redirect incomming calls from FWD to my * at home, it rejects the call. I created the pub/key pairs for rsa and its working ok and i just pasted the

I've been beating myself up over this script but clearly I'm missing something. If I enter an extension like 101 it rings through fine, but if I pick 2 for sales it hangs up with this message: == Spawn extension (sales, s, 1) exited non-zero on `Zap/1-1' Since I'm not sure what that exacly means I cannot take appropriate action. Any help would be appreciated. [default]

Anyone out there using NetLogic DIDs? And have inbound working? I got outbound working, but no joy so far with inbound. Here are the relevant parts from my conf files: iax.conf [general] tos=lowdelay jitterbuffer=no register => username:secret@zoot.netlogic.net [netlogic] type=friend host=dynamic context=sourcekit-main auth=plaintext username= secret= disallow=all allow=ulaw allow=all

Hello. You can't have two phones login with the same extension. You need to assign one phone to 101, and the other to 102. Set the user to 101 on one and 102 on the other. -Brian On Feb 11, 8:07am, "Juki" wrote: } Subject: [Asterisk-bsd] Asterisk not accepting multiple SIP phone logins } Hi all, } } I have Asterisk running on FreeBSD 4.x and I have made configurations to }

I have tried everything and still can't place / receive calls from the fwd network. At one point today I was able to call my test machine on the fwd network, I'd answer the call on the test machine (which stated Call Connected), but then the computer I was calling from, through the Asterisk server would give me a 403 Error. I am using sjphone software. I am able to call various

I have a dial plan that includes a company phone directory as a main menu option. If they just sit at the main menu, after 20 seconds, they are transferred to the operator. If the user picks an extension from the directory, they are transferred to the proper extension. If the called number is not available, they are transferred into VoiceMailMain. They leave a message, and hang up. The hang

Has something changed in the recent modifications to Asterisk that would break dialing of the IAX peer? We're getting these authority failures everywhere. Everything is configured just the way it was half a year ago, this is the message we're getting on the most recent vers of asterisk. Wiki says nothing, nor does the ast-dev list.. -lost Mar 18 12:55:23 NOTICE[3479]: chan_iax2.c:6545

I have put together this call forwarding and dnd config: I'm sure it can be dome with macro's but I couldn't figure that out... anyone care to input. 74 Turns DND on my phone will not ring, drops caller to voicemail... 73 Turns DND off 72+ext forward your extension to another extension and voicemail is left at the forwarded extension. 71 turns off call forwarding. ; dnd Could

Extreme N00b, I am getting the error message "a target does not exist" when running the make install inside the zap directory, probably pretty common, possibly a package I didn't install, just need some insight on it. The same occurs with the libpri and asterisk. -----Original Message----- From: asterisk-users-bounces@lists.digium.com

Hi everyone, I'm in the very early stages of rolling out an asterisk box at work, and one of the things I'm setting up is a trap for telemarketers >;) What I want to do is have a sipgate number in the UK here which rings for 10 seconds without calling a hard or softphone, then goes to a voicemailbox. The problem I'm having is that Playtones doesn't seem to be sending any

Hello list I had the following echo-test extension on my Asterisk 1.2 setup. exten => 1003,1,Wait(1) exten => 1003,n,Playtones(!1050/1000) exten => 1003,n,Wait(1) exten => 1003,n,StopPlaytones exten => 1003,n,Echo exten => 1003,n,Hangup After migrating my testing server to Asterisk 1.4, and a minor extensions.conf update, everything works just fine. Except for the Playtones

exten => did,1,Answer exten => did,n,Playtones(ring) exten => did,n,Wait(10) exten => did,n,StopPlaytones() exten => did,n,BackGround(sound file) did = the DID number as presented and note the '1' before Answer. This works for me. exten => 820055,1,Answer() exten => 820055,n,PlayTones(ring) exten => 820055,n,Wait(5) exten => 820055,n,StopPlayTones() exten

Has anyone ever tried to roll out a *66 auto-callback-redial feature on asterisk? I'm sure that implementing this for outbound Zap calls would be a nightmare, but what about something easier, like internal extensions? On my old Panasonic key system, it used to be such that, if the called extensions were busy, you could press 6 while hearing the busy signal, it would beep twice and hangup.

1) I'm working on a quick replacement for DISA, and I ran into the following snag: When I specify "Playtones(dial)" I can only get around 7 seconds of wait time before the dialtone stops, and the context goes to the "h" extension. Is there a way around this fixed timeout? The DigitTimeout setting doesn't seem to have any effect at all on this hangup problem. I

I am using asterisk (2 week old CVS) am for the first time have been starting to experiment with busy and congestion. At this point I am only using sip endpoints PAP2-NA devices. All testing of this is being done on a local network. my test extension looks like this: exten => 7777,1,Answer exten => 7777,2,busy(35) exten => 7777,3,Hangup Or like this: exten => 7777,1,Answer

I posted a problem earlier thinking it was due to a lack of sound card. Several members stated that you do not need a sound card to play audio to a PRI channel. I did some further testing and discovered that there is a problem with call progress tones or signaling on my PRI. I think that the reason I am not hearing audio from the MeetMe() or Playback() apps. is because the the calling side of

I currently have the following setup: exten => 2000,1,Playback(/var/lib/asterisk/sounds/Greeting) exten => 2000,2,Queue(Qabcdef|t) exten => 2000,3,Playback(/var/lib/asterisk/sounds/EveryonesBusy) exten => 2000,4,Hangup exten => 2000,103,Hangup What happens is, that the greeting in step one is played regardless if anyone is logged into the queue. So immediately after the greet, we