similar to: sip outgoing calls over proxy

Hi all. I have this configuration: Telco <-----(E1)----->TE410P//Dual Xeon Server 2.4Ghz<-----(Ethernet)----->Switch<----->GS//BT The Server is running RedHat Linux 8.0 with kernel 2.4.18-14-smp and we are having the following 2 issues: 1.- When making calls from the GrandStream to the PSTN the audio is choopy, plus theres is a pulsing sound, but when the GS

I'm new to asterisk and need some help with ideas to handle this configuration question. I am trying to establish a termination point/DID number in another country. I am currently running Asterisk CVS-HEAD. My foreign provider uses SIP and authenticates via IP address. I am not required to register my SIP connection in order to send or receive calls. Can someone help me with how to

Hello i am trying to setup sipgate gateway i can get incoming calls fine, but when i dial in and then try to dial out i get this in asterisk command line -- Called 01179248615 at sipgate [Sep 18 13:58:30] NOTICE[28232]: chan_sip.c:17885 handle_response_invite: Failed to authenticate on INVITE to '"01179553708" <sip:SIP-ID at sipgate.co.uk>;tag=as30eb9dd1' --

Hi, I got a broadvoice "business" account under the byod(bring your own device) program. I have applied the patches and created new asterisk debian packages. I have the account working on inbound and outbound. The problem area is outbound caller ID. I have 3 other accounts with IAX2 providers and have no problem setting the caller ID on outbound calls. I called them and they

Hi All, I need to limit outgoing calls in my sip peers... I tried to use "call-limit=1" in these peers in the sip.conf, but it didn't work... Here is my peer configuration in the sip.conf: [sip.broadvoice.com] accountcode=broadvoice type=peer dynamic=yes username=MYUSERNAME fromuser=MYUSERNAME authname=MYUSERNAME user=MYUSERNAME secret=xxxxxxxx host=sip.broadvoice.com

I wanna connect proxy server. my IP Phone -> my asterisk -> service provider's proxy server -> extern PSTN phone but asterisk server can't register to proxy server. I think that configuration is right. When asterisk send to register request, proxy server don't response. I did capture packet. but no response. MY setting sip.conf [kms]

Hi All. I've been experimenting with SLA on Asterisk 1.4.13 (patched up to 1.4.14). I am using a SIP channel for my "trunk" line. On the whole things are good, but I have noticed that if I misdial an outgoing call, i.e. I get 404 "Not Found" in the SIP trace, then the trunk line just drops, rather than presenting an error tone or message to the user.

I've been googling and talking with Libretel about my setup and the fact that incoming calls to my asterisk box through the Libretel number reach my box (I hear the greeting being played) but then don't accept DTMF. Here is a rough diagram of my setup: Asterisk | server | NAT <------------ Libretel | router | Note that there are NO SIP

hi there, i run asterisk 1.4 on my debian machine, which is in my internal 10.x.x.x network, behind my main computer, i cam make call, receive calls, all works fine, with all providers except sipgate.de, there i can receive call and make them, i can hear the other end but they can not hear me, this is only the case with sipgate.de i don#t know how to configure it and thought maybe someone can help

I've read that it is possible to setup * using a winmodem (linmodem). I was wondering if anyone on the list has setup * with a winmodem and if so how they did it. I have a pctel modem (pct789) I'd like to play with. Thanks for your help Jared

Hi list, I try to connect to a GW which have one domain eg sip.mydomain.com and have few IPs related to this domain. I register * to this domain with host=sip.mydomain.com and type=user. So DNS will decide on which IP of my domain I will register (or redirection on the GW side). If an incoming call arrive, I would guess that, as type=user, it will not try to match the IP from INVITE as I

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Guenther Boelter <gboelter at gmail.com> schrieb: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > On 05/31/2015 02:31 PM, Luca Bertoncello wrote: > > Hi list! > > > > Now all works as expected, at least in the simulation I did with > > AsteriskNOW. Hopefully it will work later, when Deutsche Telekom

Hello, all How can I write sound file with external G723.1 codec ( actually I have CISCO that can make H323 call to Asterisk box with G723.1 or G729 codec ) I am trying to start Record application by specifying in extensions.conf [writesound] exten => s,1, Answer exten => s,2,Record(soundexample:g723sf) or ...... ( soundexample:g729) I'am using oh323 channel driver, in oh323.conf

Hi All, I have just installed Asterisk and am trying to connect it to a SIP account that I currently have with www.voiptalk.org but without any success. Although I know that voiptalk do provide asterisk accounts I don't want to convert the SIP account until am happy that it's gonna work for me. The asterisk box is currently behind a firewall and the following ports are being forwarded

I've got the following set up: Someone calls into my PBX on a single number (via SIP trunk from my carrier), and the get a voice menu of extensions. On one of the extensions, it rings a bunch of internal SIP hardphones, plus ringing my cellphone via a hairpin through the cairrier's SIP/PSTN gateway. The issue is that my cellphone shows my PBX's number, not the original calling

Over the past 2 weeks I have been able to compile and get an asterisk system up & running on a debian Linux box. I have setup 5 internal sip clients on the lan and all works great! I can also call from outside (PSTN) into the system and reach extensions and services no problem. All is up & running behind a nat firewall with proper ports forwarded and locked down on each device to work

On Nov 30, 2007 6:35 PM, Kingsly John <member+centos at kingsly.net> wrote: > > What you have isn't a "real" modem .. it's just a winmodem that is usable > under linux. "real" modems don't need drivers to work. > > 11/30 00:31:52 dem mdm_command: string 'AT+FCLASS=2.0' > 11/30 00:31:52 dem mdm_command: string 'ERROR' ->

I have an asterisk box registering 100 numbers on a voip provider. Numers are: 2546.1000 to 2546.1099 My problem is that every incoming call arrived to number 2546.1099 that is the last number to register on voip provider. The correct is call arrive in destination number. See this exaple: I call to 2546.1000. -- Executing Dial("SIP/25461099-08738060", "Zap/g1/3000") in new

Hi folks I'am looking for the right way to select the outgoing MSN on zaphfc for Euro-ISDN. I found some notes on the Wiki and I know it has to be done in the dialplan. Does anyone know the right way/code? THX -- Tho/\/\as

Hi, I can't make outgoing calls via Broadvoice. I have tried each and every configuration that was posted to list previously. I am able to receive incoming calls fine. I get the following in asterisk console: ===================================================== asterisk*CLI> show version Asterisk CVS-HEAD-03/10/05-22:51:28 built by vicky@asterisk on a i686 running Linux