Displaying 20 results from an estimated 10000 matches similar to: "Mapoing extensions to specific trunks"
2011 Jul 20
1
Multiple SIP trunks between same pair of asterisk box
Hello,
for billing purpose between a multitenant asterisk box and another asterisk,
I am in the need to maintain multiple SIP trunks between them. Usually I use
insecure=invite,port but I had to remove or the trunks will be selected
based on IP address and not with username/password. I had to use the
fromuser option or asterisk will try to authenticate the call using the CID
and not the username,
2003 Jun 05
1
T100P + Capi + Caller ID issue
Hi 2 all.
I've a nice issue my * system.
I have:
asterisk latest cvs
T100P + Zhone cb (3fxo+10fxs used)
Diva Server 4BRI running Capi
a bunch of pots and sip phones
The whole system is running good (thanks to capigod
and Bic. for the help with the Eicon Diva), but there's
a very strange issue when calls arrive on the Diva
and then bridged to the pots on the channel bank:
the voice is not
2005 Oct 08
2
No incoming calls from chan_capi 0.6
Hello,
I'm trying to use the version 0.6 of chan_capi-cm for outgoing calls it
works perfectly but for incoming calls it doesn't work.
I tried to set an extension to dial my from-pstn context and it works.
So I think there's a problem with my capi.conf or something...
Here's a debug when calling
-- CONNECT_IND
(PLCI=0x101,DID=9100,CID=46720XXXX,CIP=0x4,CONTROLLER=0x1)
2004 Jan 07
1
yet another question on DID trunks
> -----Original Message-----
> From: john lawler [mailto:maillist@tgice.com]
> Sent: Wednesday, January 07, 2004 1:38 PM
> To: asterisk-users@lists.digium.com
> Subject: [Asterisk-Users] yet another question on DID trunks
>
> Hey Steven,
>
> Sorry to bother you yet again w/ a question on my seemingly endless
> quest to get DID trunks setup for a customer.
>
>
2005 Aug 10
0
tdm400p / outbound zap prob
I'm having trouble getting outbound calls going with aah 1.3 and a tdm400p
w/ 4 FXO. Incoming calls work fine, outbound I get this:
-- Executing SetVar("SIP/231-af2b", "OUTNUM=6643955") in new stack
-- Executing Cut("SIP/231-af2b", "custom=OUT_1|:|1") in new stack
-- Executing GotoIf("SIP/231-af2b", "0?19") in new stack
2005 Mar 13
5
possible bug in chan_capi concerning context handling
Hello,
I am trying to configure asterisk 1.0.7pre to get incoming calls from an
ISDN line using an AVM fritz PCI 2.0 with Chan_capi 0.3.5. My problem is
that the context is not recognised in the /etc/asterisk/capi.conf
I have in /etc/asterisk/capi.conf 's section "[interfaces]" the
following directive
context=isdn
and the following directive in /etc/asterisk/extensions.conf in
2005 Mar 07
0
CAPI trunks
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000066">
<font size="-1"><font face="Verdana">Hi
2005 Jan 12
4
chan_capi-0.3.5 error 127
Hi,
I have a problem for install chan_capi
My pc: Suse 9.1, with asterisk current stable en cvs
I have download
http://www.junghanns.net/asterisk/downloads/chan_capi.0.3.5.tar.gz
And the path from
http://www.levigo.de/VoIP/chan_capi-0.3.5-cvs-HEAD-patch.tar.bz2
And patch the chan_capi
# cd chan_capi-0.3.5
# patch -p1 < chan_capi-0.3.5-patch.diff
# make /for install
My error
2006 Jan 13
2
PrimuX Cards with chan_capi-cm
Hello List,
I'm trying to get a PrimuX Card (www.primuxisdn.de) working. The
Manufacturer says that chan_capi (the older one) used to work.
Now I'm trying with chan_capi-cm and have got the following problems:
Outgoing calls "ausgehend_ueber_ntba_primux.txt" the other phone rings
but when I answer the call asterisk crashes.
Incoming: first tried with immediate=no
2004 Jan 20
0
chan_capi capiECT
Hi all,
does anyone have capiECT working? I can't get it to work - please see
my logfiles below.
While using an * CVS version of late September and chan_capi-0.2.5 (I
guess), it worked!!! (I know, never change a running system ...
should've backuped ... etc.)
Here's the setup:
NT----AgfeoISDNPBX----AgfeoISDNPBX----AnalogPhones
in between the two PBX I attached my * server with a
2015 Mar 04
3
Understanding the right way to get started with multiple trunks/extensions
Background: I dabbled with asterisk years ago, and more recently have
more-or-less functioning IncrediblePBX systems for experimenting, but
I want to understand more so I'm now working with distro packages
(Ubuntu) and hand edited configurations files.
I have three SIP "trunks", each providing me with a UK telephone
number. They are for my home (1), my wife's home-based
2005 Sep 29
1
chan_cap-cm-0.6 is not working for incomming calls
Hi,
I tried to use the version 0.6 of chan_capi-cm for outgoing calls it
works perfectly but for incoming calls it will not work:
--- snip ---
*CLI> capi debug
CAPI Debugging Enabled
-- CONNECT_IND
(PLCI=0x101,DID=97,CID=0179903xxxx,CIP=0x1,CONTROLLER=0x1)
== reventix: Incoming call '0179903xxxx' -> '97'
-- reventix: info element CALLED PARTY NUMBER
--
2004 Dec 07
3
can't compile chan_capi 3.5 after patch applied :-(
Hi I use RH 9 + asterisk v1.0 stable + 2 PCI fritz cards + chan_capi
3.5 and it works fine,
Since my users want fax fonctionnality and customers know 1 of the msm
as fax number I wanted to try the chan_capi-0.3.5 patch
if I patch chan_capi and run make, I get an error message , as you
can read below, orginal chan_capi compile works, when patched I get
an error, no CID ?
Any idea ?
anybody
2013 Oct 01
1
Extensions fail to register themselves when all trunks are unreachable.
Hi,
my asterisk server has a strange behavior when all trunks are
unreachable (for example due to internet connection), it doesn't accept
registrations from any internal extension, and, obviously, I can't do
any internal call.
On the log I see only lines like:
[2013-09-30 01:35:04] NOTICE[1827] chan_sip.c: Peer 'xxx' is now
UNREACHABLE! Last qualify: 36
and then
[2013-09-30
2005 Feb 21
1
Problem with ISDN Dialin via CAPI
Hello List,
because this is my first post to this list, i'd like to introduce myself.
My name is Thorsten M?ller, 26 years old and live near Frankfurt/Main in
germany.
Okay, now to the reason for this posting:
I just installed my first asterisk server (Debian 2.2 Kernel 2.4.18-686)
with AVM ISDN Fritz PCI card (passive).
I followed the configuration on http://voip-info.org and the
2020 Mar 02
2
No CID between Asterisk using IAX trunk
I am trying to troubleshoot two Asterisk servers that have an IAX2
trunk between them. Calls come and go but there is no CallerID from the
remote server either way. One of the servers is running Asterisk 16 and
the other is an older 1.8 install (I know, I am trying to get permission
to update). The trunk between servers is very simple. Something like:
Server 1 (Mexico)
[panama]
2005 Feb 21
0
[SOLVED] Problem with ISDN Dialin via CAPI
Hi,
i was able to solve my problem.
During my playing around with * and capi i changed several options in
config files.
I did this while my * was running. To test if my changes where successful i
entered "reload" on * console.
This didn't help.
But after i stopped asterisk and startet it again, everything worked
perfect.
So it seems that doing a reload while asterisk is running
2004 Jun 24
5
chan_capi problem - hangup???
Hi,
I installed Asterisk with CAPI support. Everything works fine while
starting Asterisk, but when a call comes in Asterisk hangsup the call
after two times of ringing.
The output is like:
Jun 24 22:19:49 NOTICE[1082178480]: chan_capi.c:1931 capi_handle_msg:
CONNECT_IND ID=002 #0x011d LEN=0048
Controller/PLCI/NCCI = 0x101
CIPValue = 0x10
2006 Apr 01
2
chan-capi: Sending digits on a bri (isdn) d-channel
Dear asterisk users!
I want to control a hardware pbx with asterisk. What I need to do
this is being able to press "hold" which can be done with
capicommand(hold) and then send digits on a bri card which
connects to my asterisk computer. So far I use
Dial(CAPI/ISDN1/27:<<digits>>/bo,15) to do this. Are there better
ways? Note that these are not dtmf, I'm afraid.
I use
2004 May 25
1
Unable to create channel of type 'CAPI'
Since upgrading from stable to latest cvs I can't place CAPI calls (AVM
Fritz/chan_capi-0.3.1)
Did I miss something that has to be changed in configfiles?
Also tried to recompile chan_capi which run into an error.
capi info shows me:
Contr1: 2 B channels total, 2 B channels free.
Any suggestions to these logfile snippets
jo
----------------------------
* to ISDN
-- Accepting