similar to: IAX/SIP and openser problem. IAX bug?

Hi all I have just got a P2000w and experience several problems. Hopefully there is someone out there that has got it working. I saw it on Cebit and the person demonstrating it there told me that it was connected to an Asterisk server on the stand -so it should work. Problem 1: it does not register correctly It get lots of messages like this: Jun 26 19:45:19 NOTICE[1107585968]: chan_sip.c:5630

Hi, Does anyone have suggestions hooking Zyxel Prestige 2002 to Asterisk? I have tested Zyxel Prestige with both supported codecs. Call with G.711 sounds very choppy and cracking. Almost can't understand a word. Today I installed G.729 support into Asterisk but unbearable voice quality remains. It's a little bit better though. I have tested that Zyxel ATA with some commercial SIP

If your phones support PoE, I have had huge success with Zyxel: http://www.amazon.com/ZyXEL-ES1100-16P-16-Port-Ethernet-Unmanaged/dp/B00 5GRETMM/ref=sr_1_3?ie=UTF8&qid=1426296572&sr=8-3&keywords=zyxel+poe If you want to go even cheaper, I have successfully used these as well: http://www.amazon.com/TRENDnet-8-Port-100Mbps-Switch-TPE-S44/dp/B000QYEN

hi folks well, tinc is a really nice tool and we implemented it on 3 linux servers and 2 mobile clients (XP notebooks) so far. one of the 3 tinc servers is making troubles, when a connection is initiated from this server over a zyxel 642 adsl router out to the other 2 servers in the internet. the logfiles of the other 2 servers shows: > tinc[1398]: Received UDP packet from unknown

Hi! Then I phone other phones with my Zyxel 2000W (WI-FI) it just hang up when I answer the phone I am ringing. It works fine if I call the 2000W from other phones. I have tried many sip settings. I use this now: [205] type=friend username=205 secret=passwd205 callerid="Zyxel" <205> host=dynamic context=local nat=yes canreinvite=no disallow=all allow=g729

Has anyone experiences this please: - We were running a number of ZyXEL P662HW-61 routers at our sites and all traffic was being sent over IP-SEC VPN's between devices. When we moved to a new architecture, we got rid of the VPN links so that the SIP traffic was running directly through the routers. Each site uses Snom 360 devices with the latest firmware (v4). Ever since we did this, the

I understand this question is over-broad, but hopefully you can have patience with a newbie and toss me a bone... I am in the testing stage of deploying Asterisk. I have successfully configured it to work behind the NAT of my ZyXEL ZyWALL 35 firewall. However, I think there is a lot of tuning I can do to get better reliability, bandwidth management, and maybe QoS from the firewall. I

Does anybody have any experience with the ZyXEL Prestige 2000W? I am having problems with the line tear down when I call another extension. If nobody picks up at the other end when I hangup the 2000W, the other extension continues to ring. Is there any way to hangup a SIP call if there is no more traffic? Asterisk seems to think that there is still a connection open. This is pretty annoying

I have a zyxel wifi phone and it works just great registering and callin on * but when it comes to menus it just not working (buttons dont change menus) . Anybody else have this problem? Need help. thanks. -------------- next part -------------- A non-text attachment was scrubbed... Name: Jim Van Eeckhoutte.vcf Type: text/x-vcard Size: 136 bytes Desc: not available Url :

If you see a wj0011 version of firmware for Zyxel Prestige 2000W floating around (I found it in a German forum), KEEP AWAY. It completely trashed the wireless networking in my phone. -- ========================================== Rod Bacon Empowered Communications Ground Floor, 102 York St. South Melbourne Victoria, Australia. 3205 Phone: +613 99401600 Fax: +613 99401650 FWD: 512237

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Anyone have any experience with either of these, I 'd appreciate some feedback? Plus it seems pretty easy to steal a connection with this. Zyxel Prestige 2000W WiSIP thanks, - -- Steve "They that would give up essential liberty for temporary safety deserve neither liberty nor safety." Benjamin

Hi, I'm trying to compile zttool from the Zaptel lib, but I just can't find the sorcecode for Libnewt. Anyone got a link? Since i'm using LFS, I can't use precompiled packages. -- Med venlig hilsen / Best regards Michael L?jtnant - Systems Engineer ZyXEL Communications A/S Columbusvej 5 - 2860 S?borg Tel (+45) 3955 0700 - Fax (+45) 3955 0707

Today I faced a problem. Please help to solve this problem. Asterisk 13.7 (chan_pjsip) & Zyxel Keenetic Plus DECT, firmware v2.06(AAGJ.9)C1 Outbound call from Zyxel Keenetic (pjsip endpoint) to PSTN (pjsip trunk). Call using early media (183 Session in progress) and rtp_timeout=10. After 10 seconds: [2016-12-16 13:53:15] NOTICE[6654] res_pjsip_sdp_rtp.c: Disconnecting channel

Does anyone know of any sip wifi phones? Only one i can find that is redily availiable is the zyxel prestige 2000w and from what i hear it is flaky. Kurt Fankhauser WaveLinc HYPERLINK "http://www.wavelinc.com/"www.wavelinc.com 114 S. Walnut St. Bucyrus, OH 44820 419-562-6405 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database:

Okay sorry for the empty message bodies earlier problem with Outlook, I guess is you have digital IDs as I do and they expire, even if you override the signature option it clears all sent text....windows...mmmmph.... Anyway, what I was trying to relay to the group was that ZyXEL has come out with a new Firmware (March 21, 2005) for the Prestige 2000W WiFi SIP Phone. In my opinion it has made

I see that ABPTech are now offering this SIP Wifi phone. Does anyone have an experience with it? I've considered the Pulver/Zyxel wifi phone but would really rather have something that can handle WEP or WPA. I run an 802.11g wlan with 256 bit WPA encryption. This Hitachi phone looks very much like a cell phone, which could be ideal. Michael -- Michael Graves

I'm trying to set up pjsip to work with an obi202 and google voice. But I can't configure the endpoint. pjsip: [obi202-auth](!) type = auth auth_type = userpass password = <mypass> [obi202-aor](!) type = aor max_contacts = 2 ; ===== endpoints ======== [gv-voice](obi202-endpoint) auth = gv-voice aors = gv-voice identify_by=auth_username ;identify_by=username ; I also tried

Hi All, Today I got a couple of ZyXEL Prestige 2000W WiFi phones. I'm having a problem making SIP calls although I can receive calls just fine. When I try to make a call the phone makes some sound (like "bup bup bup bup bup bup beep beep") and then I just hear hissing background noise (not too loud - like comfort noise). I upgraded to the latest firmware on the phone - Wj.00.10

Hi, I am having an odd problem with one of our Zyxel P-2000W v2 wireless SIP phones. The phone can no longer receive calls. DND is not turned on and the phone has the exact same configuration as the other 2 phones (they each have unique extensions and such but all other settings are the same.) What can I do to debug this in the CLI. Nothing seems to shed any light on the problem. I am using

Hi All, I'm trying to connect to a SIP carrier who never connected with Asterisk. I managed to connect with a sipura phone or a grandstream, no problem. When I configure asterisk, I'm able to send out calls to the carrier no problems, however, receiving calls doesn't work, and I keep getting the following messages: <-- SIP read from 69.xx.xx.xx:5060: INVITE