similar to: 1.2.1 "Silence suppression is disabled" what the hell?

Hi, I've installed * 1.2.1 with latest bristuff patches (0.3.0-PRE-1f). When I activate music-on-hold on a SIP-to-SIP connection, the music sounds like in a fast-forward play mode. On the *-console I can see much lines like this: -- Silence suppression is disabled (option_silence_suppression=0 chan->timingfd=18) What's going on? With bristuff 0.3.0-PRE-1d everything works fine (but

I looks like someone decided to bundle a patch that hasn't been merged yet. Good for testing, not so good for initial impressions. In /etc/asterisk/asterisk.conf add or uncomment this: [options] ;silence_suppression=yes And see if that helps. You need a timing source for it to work, which is why it is disabled by default, but the logging might be a bit chatty in any case. Dan

I upgraded from 1.0.9 to 1.2.1 My IVR which worked perfectly on 1.0.9, now hangup with no reason (at least I could not find a cause) When this hangup happen, I can read: == Auto fallthrough, channel 'IAX/user-20' status is 'BUSY' This happening also with ZAP channels I'm really disappointed with 1.2.1, what is benefit from upgrade if I must spend couple days to get my system

Hi, I am having a difficulty with getting two realtime user?s to bridge on answer. I have managed successfully to bridge the same two users/channels via the Bridge Manager api command and confirm that the two communicate directly bypassing the asterisk server (I confirmed this with Wireshark). Does anyone have some ideas? I have put some log entries below. I haven?t attached my

Voice-mail messages aren't sent to e-mail address. I have two Asterisk servers, first one is upgraded from 1.0.RC2 to 1.0.9, and second one is from 1.0.7 to 1.0.9. Both Asterisk have EXACTLY same "voicemail.conf" configuration, but second Asterisk don't sending voice mail messages through e-mail! I'm using almost default "voicemail.conf" with just one mailbox

I'm using bristuffed Asterisk with ISDN/ZAPHFC I have VERY ugly (outgoing) sound through ISDN/HFC if echocancel=yes in zapata.conf, but without echocancel I have bad (incoming) echo Through PSTN/FXO sound is ok with or without echocancel. I tried other echo cancellers (in zconfig.h) two times: ECHO_CAN_KB1 (this was default) ECHO_CAN_MARK2 ECHO_CAN_MG2 after any change I compiled (make

When incoming DATA call arrive on ISDN BRI, asterisk (zaphfc) recognise that this is DATA call, but answering anyway (playing IVR messages, etc...) How to stop that? I want that only VOICE calls are answered, and DATA/FAX to be ignored. (I'm using Asterisk 1.2.1 Brisftuffed 0.3.0-PRE-1f, ZapHFC) Log: -- Accepting data call from 'XXXXXXXX' to '3001' on channel 0/2, span 1

Hi All. I have currently a small problem to solve. I have a kvm virtual machine which in output of ifconfig eth0 | egrep 'RX packets|TX packets' RX packets:792681304 errors:0 dropped:560728 overruns:0 frame:0 TX packets:716661674 errors:0 dropped:0 overruns:0 carrier:0 show dropped packets. I think that rx buffer is to small (no strange messagess in dmesg) and would

Somebody must have! Please, send me a g723 and/or g729 (for Asterisk) to pisac@hotmail.com (antispam subject: codec) Thanks, thanks, thanks... :-)

I am using a Polycom 501 SIP phone behind NAT. Asterisk server is public with no NAT... everything works on the Asterisk end just fine EXCEPT that I can never check voice mail After about 30 seconds the call drops with these messagess: [Sep 30 23:47:48] WARNING[26819]: chan_sip.c:1950 retrans_pkt: Maximum retries exceeded on transmission 320893f1-50c13ba3-78c26164 at 192.168.1.54 for seqno 2

I upgraded from 1.0.9, to 1.2.1. I was using this line exten => s,1,gotoif($[${CALLERIDNUM::3} = 066]?mycity,1:other,1) it selecting calls if callerid begins with some number pattern (from some city) But, it's not working anymore in Asterisk 1.2.1 when I test this with noop(${CALLERIDNUM::3}) I get full callerid, not just first 3 numbers like it use to be on 1.0.9 Why?

Do bristuffed zaptel (zaphfc) supporting rxgain/txgain in zapata.conf? I'm changing rxgain in zapata.conf, and reloading zaptel, but sound level on ISDN(HFC) is always the same (loud).

If my extension is 22, and voice mail access number is 909, then with exten => 909,1,voicemailmain(s22) I can access voice mail 22, without number and password prompt. But, I want that every extension can access its voice mail without number and password. So, when I put exent => 909,1,voicemailmain(${calleridnum}) voicemail want only password. I want to eliminate password too, so when I

Hello everyone. I tried to install Civ4 version 1.61 on my ArchLinux 64bit system with wine 1.3.3. Unfortunately the installation fails. I get to the point when I get asked to choose the language and then the installation fails giving me a lot of error messagess like these in the terminal: Code: fixme:heap:HeapSetInformation 0x7f830746b000 0 0x7f830c5bfcb0 4 fixme:atl:AtlModuleInit SEMI-STUB

First off, I don't know if this is password caching revisited with a vengeance or what. It's very inconsistent for the amount of time the share will stay mounted. I *think* the following are the relevant messagess in the log: Jun 23 22:24:36 reliant kernel: smb_trans2_request: result=-32, setting invalid Jun 23 22:24:36 reliant kernel: smb_retry: caught signal And of course, I get the

Dear all I have confusion how to asterisk genrate tone and what ringing code use default 180 or 183 i have setup asterisk with mediant 2000 with avaya [asterisk]-----[mediant 2000]--------[Avaya] when i call from avaya side to ---> asterisk i don't got ringback Sound so how to asterisk genrate tone for calling party is there any soution and what is the problem of

Some of you may remember back in May the thread on using Asterisk as a voicemail server for a Cisco Callmanager system. My own Callmanager system is integrated into an Asterisk server for voicemail (and other things). Back in May I was using H323 for integration, but since I've upgraded to CCM 4.1 I have switched over to SIP. The integration with H323 required using Call forwarding to send

How to change available options (behaving) during listening of voice mail? (They are unnecessarily complicated) For example, I don't want to press 3 (advanced options) and again 3 for envelope. I just want to play envelope. Also, when saving message, I do not want to choose folder, I want that message as default be saved in old messages. And, I don't want to press 6 for next message, I do

Hi all, i got a lot of this messages if only one caller is in a meetme conference and it playing a MusicOnHold Sound. If a second Caller entry the Conference the messages ended. DEBUG[11794] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=61 What does this message mean? Thanx for answers Daniel

Hello List - Here's the setup: Mediatrix 1102 ATA (t38enabled) <--> Asterisk 1.4.1 <--> IP <--> SIP GW <--> TDM The T38 call comes up perfect - I see the initial invite, followed by G711, Re-Invite, T38 establishes, Fax Completes, T38 Stops, Call Down. here's the problem - I see the following in my console: [Mar 19 05:09:38] WARNING[4745] chan_sip.c: Can't