similar to: SIP phones can't pick up incoming call on analog trunk - signalling problem?

Yo! I changed callprogress to no, and in wcfxo.c source around line 334 i changed the value 32000 and -32000 to 10000 and -10000 because it had something to do with the DC voltage when it was ringing. I found reference here (http://www.voipuser.org/forum_topic_1791.html) with an interesting diagram of wiring that was incorrect for sending voltage to a phone or something like that. So put it

Starting - oh - three weeks ago I started getting this when I compiled zaptel stuff: In file included from /lib/modules/2.4.26smp/build/include/linux/spinlock.h:6, from /lib/modules/2.4.26smp/build/include/linux/module.h:11, from wct4xxp.c:31: /lib/modules/2.4.26smp/build/include/asm/system.h: In function `__set_64bit_var':

Hello everybody. I have an customer asterisk 1.0.5 running well since 3 monthes, 2 TDM cards 4 FXO, 4 FXS. Since one week, unable to pass call between Zap and Sip getting the "exception on 15, channel 1" The * box is connected to an eads PBX and it seems that failure started when they make some changes on the PBX. Have someone an idea and what is causisng this failure? Here are the

Hi all, I have hit a wall configuring a TDM400, I have set these up before without issue but today I just can't seem to figure out what I am doing wrong. On an incoming call the following is produced in the Asterisk console with verbose 4 -- Starting simple switch on 'Zap/2-1' Mar 22 16:12:34 NOTICE[2051]: chan_zap.c:6063 ss_thread: Got event 18 (Ring Begin)... Mar 22

Sorry if this is a daft question but when a PSTN call comes in on my X100P the console shows the following; NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)... NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)... NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)...

Hi All, For the most part, the PBX works as it should. Occasionally people complain that they call and the PBX doesn't pick up. Other times it looks like the call is answered by Asterisk but I still hear ringing and I start listening to the IVR menu a few seconds into it. As for Asterisk not picking up, I see the following in the logs: [Mar 27 13:32:29] NOTICE[13197]: chan_zap.c:7071

I have an Asterisk server running todays CVS (updated it just in case that was the problem). It has 3 X100P cards. The first two lines I use as my normal work lines and the third is my fax line which I use with SpanDSP. I run Fedora Core 4. I have a problem that the third X100P does not answer the call. From the console I can see that there is an incoming call with the following: --

I have an issue getting any incomming calls When the phone rings something picks up and gives it a fast busy. There is no one using Zap/2 it does the same thing with voicemail and voicemail 2 you can see the console output below, I would love any help anyone could shead on this issue, Michael NOTICE[1192484144]: File chan_zap.c, Line 4270 (ss_thread): Got event 2 (Ring/Answered)... --

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. If i pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if i dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

Hi, I'm having problems using a TDM400P Card. I put my SIM card in a Nokia Premicell and connected it to a TDM400P card but when I make calls to the number, it hangs up automatically. The card also can't call out. Any ideas? I've searched the archives without much success. I appreciate all your help. Details: I'm using Asterisk 1.2.17 on Fedora Core release 5 (Bordeaux). On an

Here is some dialog from the Console: -- Starting simple switch on 'Zap/13-1' Feb 10 07:22:36 NOTICE[21105]: chan_zap.c:6063 ss_thread: Got event 18 (Ring Begin)... -- Executing Goto("Zap/13-1", "mainmenu|s|1") in new stack -- Goto (mainmenu,s,1) -- Executing BackGround("Zap/13-1", "thank-you-for-calling-poker -support") in new stack

Using the latest SVN of zaptel and asterisk, I can no longer receive incoming analog calls. The caller just hears it ringing but Asterisk doesn't pick up. I am seeing these error messages: [Apr 9 09:38:02] WARNING[16564]: chan_zap.c:6470 ss_thread: CallerID returned with error on channel 'Zap/2-1' [Apr 9 09:38:50] WARNING[16570]: chan_zap.c:6470 ss_thread: CallerID

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. If i pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if i dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. When I pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if I dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

When I enable callprogress I get this error message... (when I call, it will ring forever but asterisk is acting as if it DID pick up the line ... but it never did... ) I'm beginning to think that asterisk can't hangup the line when in voice mail and this, whatever action I'll take... Actually, callprogress doesn't seem to work at all... (in my case) Mar 24 23:37:28

I'm having sporadic problems with my X100P card. When trying trying to call out I get a message on the console that the channel is busy even though I have bounced asterisk. It seems the card grabs the line and doesn't let go. When I try to call the number I get a busy signal. If I perform a rmmod wcfxo and restart asterisk everything retruns to normal. I have a TDP400P installed along with

I've followed the recent thread on caller id with UK British Telecom networks (where the caller id data is delivered before the first ring). My understanding is that if I use a recent CVS head (e.g. CVS-HEAD-09/18/04-17:45:52) and a TDM400 with FXO modules, all I need to do is include the line: usecallerid=uk In my zapata.conf (in the [channels] section) I've done this, but I get: Sep

Well, I thought I had my problem solved, but it is acting up again. Hopefully this time I can provide enough information. What I have is an * box setup with one X100P and TDM400 with one FXO and one FXS. For my regular setup with interfacing with my PSTN and my entire house with analog phones, the box is working great. I am trying to interface a Mediatrix 1202 device to my * box via the

Hi all, i use asterisk 1.2.7 and i have a problem with callerid. i use sangoma a200 cards. one fxo one fxs module i have these scenario - bob calls adam, where bob calls into my asterisk and adam picks up "from" my asterisk - bob and adam are speaking to each other - meanwhile eve calls adam, adam hears a beep, and knows there is an other caller on line. - bob and adam stop seaking

Calling from PSTN let extension 601 ring twice, hang up and starts over again to ring twice, ... If I pickup I do not hear on extension 601, and on the PSTN it is still signaling to ring. Can anybody enlighten me, please? extension.conf [incoming_88097074] exten => s,1,Wait(1) ;wait to get caller ID in. exten => s,2,Dial(SIP/102,20) exten => s,3,Voicemail(u102) exten =>