similar to: [suse-isdn] Major Problems UTStarcom F1000 registering -- pls help

Has anyone had any luck configuring the UTStarCom F1000 with asterisk? I get the wireless to work but the sip registration is a problem. Below is my SIP Debug. The server is 192.168.0.80 and the phone is 192.168.0.166. Sip.conf: [f1000_1] type=friend host=dynamic defaultip=192.168.0.166 port=5060 secret=mysecret ;auth=md5 username=f1000_1 qualify=yes

Hi list, I bought two UTStarcom F1000 phones, pre-equipped with the latest firmware, including WPA support. Those are configured to register to an asterisk server on the internet (not LAN), and registration works. Calling and being called also, with transfer and all bells and whistles. After a few minutes up to 5 hours (varies widely), the display tells me that an Accesspoint is not available

I bought a UTStarcom F1000 WiFi IP Phone from http://www.luxoncomm.com and tested it with Asterisk. This is a my first impression of the device. The F1000 supports SIP. It looks and operates like a cell phone, and connects to the Internet through WiFi, so you can use it at any WiFi hotspot. I set up a 802.11b wi-fi network with a Linksys BEFW11S4 Wireless-B broadband router with no security

Hi all, I' m currently testing a Wifi UT Starcom F1000 and for my taste even with the audio volume level even on max. setting, the speaker is not loud enogh. Is there a way to raise the audio-level specifically for a concrete SIP device via a sip.conf setting or something like that ?? TIA, Bruno

I have 8 - F1000G utstar phones. on a couple of them I can configure them by the WEB interface with no problem. On a couple of the them I cannot. I get no response when I point the browser to them. THe units work. keypad is fine. I can examine the network values - specifically the DHCP address. etc... Just cant get the web interface to do anything. Has anyone had this issue and know how to

Can anybody help me on configuring utstarcom F1000 on asterisk? Is there a way to do it or is it impossible? ___________________________________________________________________________ Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o

Does anybody use UTStarcom F1000G Wi-FI VoIP phone? http://www.utstar.com/Solutions/Handsets/WiFi/ I'm planning to buy one and I need to know did you have any problems with phone. What is the sound quality? How close you need to be to the access point? Please, any information's are useful to me. -- Tomislav Parcina tparcina#lama.hr

Hello all: For fun, I am learning about Asterisk, and trying to get Asterisk working at my house. I installed Asterisk@Home. It seems to be functioning fine. I installed a couple of softphones, and have them registered with Asterisk. I actually work for a CLEC, and I have registered my Asterisk box with SER (which I don't begin to understand yet) at the office. In order to try to

That was my initial setup before trying the abbreviations, but anyway: [root at plexvm ~]# nano /etc/fstab [root at plexvm ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Apr 3 14:02:23 2020 # # Accessible filesystems, by reference, are maintained under '/dev/disk/'. # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info. # # After editing this file,

Hi all! I''ve got 2 (soon 3) internet connection. 1 - via ADSL, 2(and3) via ppp My network: http://desima.objectis.net/network-diag linux1: user1.user2 eth0=192.168.1.1 ppp0=192.168.5.2( gw 192.168.5.1) gw=192.168.1.2 ( thru ADSL) compA=192.168.1.6 compB=192.168.1.15 gw2=192.168.1.217 via ppp to different ISP All works for compA and CompB, user1 should use default gw(192.168.1.2)

User & pass are present According to the man pages, workgroup is supported I have changed it to domain, but that didn't change a thing [root at plexvm ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Apr 3 14:02:23 2020 # # Accessible filesystems, by reference, are maintained under '/dev/disk/'. # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more

Le ven. 3 avr. 2020 ? 17:54, Jonathan Billings <billings at negate.org> a ?crit : > On Fri, Apr 03, 2020 at 04:00:42PM +0200, Patrick DERWAEL wrote: > > //192.168.1.200/mp3 /home/plex/Musique cifs > > user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > > //192.168.1.200/videos /home/plex/Vid?os cifs > >

Exactly the same... ??? [root at plexvm ~]# mount -t cifs //192.168.1.200/mp3 /home/plex/Musique --verbose -o username=plex,password=plex,domain=DERWAEL,ro,auto,vers=3.0 mount.cifs kernel mount options: ip=192.168.1.200,unc=\\192.168.1.200\mp3,vers=3.0,user=plex,domain=DERWAEL,pass=******** mount error(2): No such file or directory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)

hello list, I am attempting to load balance SSL web servers using haproxy on centos 5.7. I am using HA-Proxy version 1.4.18 Here is the stanza in the config regarding SSL: listen https 192.168.1.200:443 mode tcp balance roundrobin option forwardfor except 192.168.1.200 option redispatch maxconn 10000 reqadd X-Forwarded-Proto:\ https

Hi, i have a HT 488 and I want using this like an FXO for Asterisk. I have find some configuration in the list archive & google but my HT with these config not work. my sip.conf [HT-488] username=400 type=peer secret=wowowow qualify=yes port=5062 nat=no host=192.168.1.157 fromuser=400 disallow=all context=from-pstn allow=g711u allow=ulaw allow=alaw my sip debug:

I am using shorewall firewall. My firewall have two interfaces: External interface 192.168.9.254 and Internal Interface 192.168.1.1. I have a printer (HP) 192.168.1.200. I want to share my printer with PCs in subnet 192.168.9.*. I use static nat : /etc/shorewall/nat 192.168.9.250 eth0 192.168.1.200 No No And i open all ports for net to local:192.168.1.200 and all ports for

Hi all, I'm tearing my hair off trying to understand the difference between C7 & C8 for mounting a cifs FS with fstab I'm building a Plex media server on C8 and duplicated the fstab entries over from my current C7 installation My data (music & movies) are on CIFS shares on a Synology NAS. The packages cifs-utils samba-client samba-common are installed, up to date etc... These

I'm about to start working with WiFi phones on my Asterisk installations. Can anyone tell me if they are using WiFi phones on wireless network that is extended with WDS and how well the phone handles jumping from access point to access point while on a call? Do any WiFi phones support WPA encryption or are they all still under the impression they are only being used on public hot spots?

dovecot-2.0.9 on CentOS 6.7 The system in question is not connected to the Internet, so I can't copy-and-paste. I have to type anything required :-( Brand-new out-of-the-box install with a really minimal dovecot.conf including: service imap-login { inet_listener imaps { address = 192.168.1.10 port = 143 ssl = yes } } ssl_cert=</etc/pki/tls/certs/dovecot.pem

I am hoping some of you can help me troubleshoot this problem I am having with my home asterisk machine. I have incoming POTS service using a SPA-3000 (extension 119). Calls on that line go to an attendant recording that offers a menu choice: press 1 for Nancy, press 2 for the rest of us. In reality, pressing anything other than 1 sends the call to the rest of us by dialing both extensions 101