similar to: TE405p -- loopback for the phone company?

Folks, I really hope you can help me here - I'm beginning to tear my hair out! About 10 days ago my company moved to a new office. As a result of this, we've plugged our PBX box, which has happily been running for the last three years, into our new E1 line. Since then, I've been seeing intermittent yellow alarms. Obviously, since this was working fine in the old office, the thing to

Hi to all, I have a problem with this wildcard and one E1 line. The server is a Asus P4P800S with the 865PE chipset, and 512MB RAM. The kernel version is 2.4.26. I have donwload and build the latest CVS version of zaptel, libpri and asterisk following the ufficial instructions of digium. I have set up my server in this way: zaptel.conf loadzone=it defaultzone=it

Hi all, Has anyone got any experience with hooking Asterisk up with a Siemens EWSD 13 switch over a E1/PRI ? We're located in Belgium (Europe) and one of our telecom partners uses this switch. We connected one of our TE410P ports with their switch, but the status light on the TE410P card keeps blinking red. On their side they are getting a DSA (distance service alarm) error, so this

Can anyone with a TE405P tell me what zttool tells them the type of card installed. With ours it says it's a TE410P. B

Hello, We have finished our tests of the new Digium firmware on the quad T1 cards(TE405P/TE410P). Overall it is a big improvement over the version 1 firmware. Here's the review: http://astguiclient.blogspot.com/2005/09/digium-405p-v2-review.html MATT--- -------------- next part -------------- An HTML attachment was scrubbed... URL:

I anyone has any hesitations in upgrading their 405P (or 410P) to V2 of the firmware, read below; I installed one today (turnaround time around 2 weeks to Australia, inc. economy freight in both directions... impressive!) and have noticed immediate, significant improvements. Audio levels are better (have set tx and rx gains back to 0.0) and missed frames have gone (popping, clicking,

Hello, This is a follow up question to my previous one http://tolstoy.newcastle.edu.au/R/e4/help/08/02/3600.html I am attempting to model relationship satisfaction (MAT) scores (measurements at 5 time points), using participant (spouseID) and couple id (ID) as grouping variables, and time (years) and conflict (MCI.c) as predictors. I have been instructed to include random effects for the

Hi I am very new to R and statistical programming in general. I am trying to reorder data from a .csv file. I have managed to import the data and create a zero matrix. I am now trying to fill the matrix. There seems to be some problem with this section of my code. I have highlighted the dodgy code in red. Please help if possible. ###################################################### ###########

New to list, going through steep learning curve with *, could someone assist with how to install zttool with slackware10, the normal make zttool fails, assume I am missing a dependency? (newt and newt-devel?) Trying to test Q.031 pri span with TE405p card, Google has little clue on Zttool and the * manual has a heading, but no entry? Thanks Magnus

I'm trying to play Zillions of Games <http://www.zillionsofgames.com/> under Wine 20020122 on a Debian 2.2 (potato) setup. When I attempt Internet play, the game does not list any service providers, and I get the following messages: fixme:ole:CoCreateInstance no classfactory created for CLSID {5959df60-2911-11d1-b049-0020af30269a}, hres is 0x80040154 fixme:mci:MCI_LoadMciDriver

This morning I discovered this in the logwatch report for our external MX backup host. STARTTLS: write error=syscall error (-1), errno=32, get_error=error:00000000:lib(0):func(0):reason(0), retry=99, ssl_err=5: 206 Time(s) I also see many entries similar to this: 8: fl=0x802, mode=140777: SOCK inet04.mississauga.harte-lyne.ca/34091->(Transport endpoint is not connected): 1 Time(s)

Hello All, Anyone out there using ISDN PRI from either MCI or XO/Allegiance? Gotta make the choice today and the difference per month is only about $25 in favor of MCI. Billing is pretty much the same between the two so I have pretty much no point of reference on which to choose. Any thoughts from anyone experienced with these two compnies would be greatly appreciated! Thanks, Wiley

We have an old Telrad 128KSU PBX to which I am trying to connect asterisk in the following manner: Current Setup: Telco-> T1->PBX Desired Setup: Telco-> T1-> Asterisk-> T1-> PBX. I am first trying to setup the Asterisk -> T1->PBX part without disturbing existing setup so I can get asterisk to forward calls to PBX and once that is done, I would try to move the telco

Hi, I try to install LBA2 (Little Big Adventure 2) with wine. The installation process works well but the game itself ask me to insert the LBA2 cdrom but do not recognize it. I have to following error several times: > fixme:mci:MCI_LoadMciDriver Couldn't load driver for type CDAUDIO. > If you don't have a windows installation accessible from Wine, > you perhaps forgot to create

I tried running Pinball.exe (comes with Windows 2000) and got the following message after the Pinball splash screen blinked on the screen for an instant and then exited: fixme:mci:MCI_LoadMciDriver Couldn't load driver for type PINBALL.MID If you don't have a Windows installation accessible from Wine, your perhaps forgot to create a [mci] section in system.ini. I have an [mci] section in

Hello. New to the list. We're in the process of deploying Asterisk. Actually, we're going live tomorrow, and I just found out that my Zaptel cards have been mis-configured. I'll preface this by saying that I have looked in the wiki, read through the samples, and attempted to call Digium (they're closed.) So I'm praying that someone on the list can help me out! I have two

Hi all- My TDM long distance is provided by MCI. We use account codes where MCI sends a challenge tone after receiving 1NXXNXXXXXX. Anyone have any suggestions of how to accomplish this? I can't get the soft phones to send the DTMF (the other digits go down the d-channel of our PRI). I also have not bee able to get the dial or the outgoing queue command to work. Anyone run into this?

Hi list, Sometimes I receive a Red Alarm in my E1 trunk (E&M immediate start signaling), and just few seconds after this, all alarms are cleared. This problem ocurrs many times/day, and if are calls in progress, these calls just hang-up. Could it be an asterisk bug? Or may I contact the PSTN provider? Thanks Eduardo

Group Having trouble installing zaptel. Below is my server specs Intel Motherboard D101GGC TE405P CentOS-4.2-i386 Here is the output trying to do a 'make' =============================================== make clean rm -f torisatool makefw tor2fw.h radfw.h rm -f ztcfg torisatool makefw ztmonitor ztspeed zttool zttest fxotune rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f

Hello, JIT::recompileAndRelinkFunction's runJITOnFunction does not use the MCI arg, causing null pointer deferences at every call. Attached patch makes runJITOnFunction more reliable. Thanks, Gianluca -- It was a type of people I did not know, I found them very strange and they did not inspire confidence at all. Later I learned that I had been introduced to electronic engineers.