similar to: busydetect

Over at http://www.voip-info.org/wiki-Asterisk+tips+911, I see these extensions.conf lines: exten => s,1,SetVar(SET_EMERG_FLAG=0) exten => s,n(checkavail),ChanIsAvail(${EMERGENCY_TRUNK}) exten => s,n,SetGlobalVar(EMERGENCY=1) exten => s,n,SetVar(SET_EMERG_FLAG=1) exten => s,n(dial),Dial(${EMERGENCY_TRUNK}/${EMERGENCY_NUM}) exten => s,s+2(trunkbusy),GotoIf($[${EMERGENCY} =

Hi, I am trying to implement 911 funtionality in my PBX. A call should drop if all lines are busy. Here is my context nineoneone from extensions.conf [nineoneone] exten => s,1,Set(SET_EMERG_FLAG=0) exten => s,n(checkavail),ChanIsAvail(${EMERGENCY_TRUNK}) exten => s,n,Set(EMERGENCY=1,g) exten => s,n,Set(SET_EMERG_FLAG=1) exten => s,n(dial),Dial(${EMERGENCY_TRUNK}/${EMERGENCY_NUM})

I am having problems getting a Nicherons TDM400P wildcard clone to dial out. Everything appears to be configured correctly, but although I see call progress, it never seems to actually pick up the phone. (The following is a test of 911 emergency, where I substitute 811 [repair service] as the actual number dialed.) *CLI> -- Executing [911 at from-internal:1]

Todd How do you have the context in the phones sip configs set? Bryant From: "Todd Reese" treese65 at gmail.com Hi all, I've been have problems with getting this system on line and would like to acquire some help with the extensions.conf. My current problem is that the phones won't dialout.on the VOIP lines listed as dialout1, dialout2, dialout3. This version of asterisk

hi ppl, i'm using asterisk 1.2 because i'm making use of voiceone, but before i was using asterisk 1.4 and had the same problem, it concerns an italian voip/sip provider called eutelia/skypho, my problem is the following one: when i start my pbx my skypho account is working fine, meaning that e.g. incoming calls are shown in the asterisk CLI and caller and callee can hear each other when

Hi All; Why busydetect=yes caused this autmatic hangup happens without any reson (while responding to entering the digits in the IVR) I do not know! And what is the solution I do not know. I used busydetect=yes and busycount=5 in zapata.conf to help me in hangup when detect the busy tone, but I faced the following problem: While I am calling to the Asterisk PBX, and during the response for the

simple setup... two * boxen, X100P in each pots(1) --> ZAP/1 --> *(1) --> IAX2 --> *(2) --> ZAP/1 --> pots(2) with busydetect=yes and callprogress=yes in zapata.conf, calling from pots(1) through to pots(2) we get the following -- Zap/1-1 is ringing -- Zap/1-1 is ringing etc, and if nobody picks up, then it timeouts and hangups, good however, if during the ringing,

Hi, I'm using asterisk as softphone for a certain application. It uses chan_capi for PSDN connection and chan_oss and the manager as user interface. When calling someone, who is busy, I can hear at the speaker the busy indication, but the manager command "Status" still tells "Ringing" (chan_oss) or "Dialing" (chan_capi) (until it times out). Is chan_capi

Hi guys. I have a XP100P Clone , and the busydetect dont work for me.. PSTN---Asterisk---Sip---Asterisk----PBX Any call from pstn side dont disconnect ... I have no disconnect supervision and busydetect dont work... Please Help me. Zapata.conf [channels] echocancel=yes usecallerid=no hidecallerid=no rxgain=0.0 txgain=0.0 signalling=fxs_ks callprogress=no context=entrada channel=>1

Hi there, I got really tired of false hangups, specially when someone calls from SIP/IAX/whatever to PSTN, which makes no sense in using busydetect in the zap channel, as the caller will eventually hear the busy tones and hangup, causing the zap channel to be "freed" as well... After suggesting that the busy detect be enabled only for inbound calls, and finding other people that think

My telco doesn't provide Disconnect Supervision or Polarity Change. So I figured I have to detect hangups with busydetect=yes in zapata.conf. I tested it. When the telco sends a busy tone * detects it and hangsup. So far so good. The problem is the telco doesn't always send a busy after remote hangup. Most of the time it sends a congestion tone. I am guessing these tones from what I

FYI to anyone else who may be experiencing random hangups; I removed the busydetect=yes lines from the conf files on my asterisk servers, and haven't had a hangup since. I had done that once before and it didn't seem to have much of an effect, so I'm not breaking out the champagne yet. But so far over dozens of calls both made and received since I took that line out, I

Hi, I'm having random hangup problems with zap channels. If I turn busydetect off in Zapata.conf, * fails completely to detect a user hangup in the middle of a script. On the other hand, if I turn it on, everything works much better, but long calls tend to be hung up without a motive. Any other parameter that I can try? Any #define that I can tweak and recompile? Will callprogress

Hello, I've commited the new busydetect routine to CVS. You need to cvs update asterisk of course and then choose it in asterisk/Makefile and recompile asterisk. All you X100P users that had the problems with false hangups or the card not being able to detect the busy tone please check that. In the asterisk/Makefile you need to find a line BUSYDETECT = and uncomment what you want/ comment

The FXO lines on my TDM400 are connected to PSTN lines in Israel. As far as I know, the lines around here have disconnect supervision (I've seen some other Israelis on this list, anyone know for sure?), because it's worked on Dialogic cards, which reported hangup, not busy detect (while when I connect a Dialogic card to a PBX, I have to measure the busy signal's frequency/cadence or

Hi All, This isn't really a question, but it's an issue I experienced that was driving me crazy for a few days, so I thought it might be good for the archives. Basically what was happening was everytime a particular customer called (long distance), the line would disconnect immediately after answering. I thought it might have been the phone, so I swapped the phone with another - still

I have a very strange problem I'm hoping someone has encountered already. I've scoured the internet for an answer to this one. My phone company provides no disconnect supervision. Hence I'm forced to use the busydetect feature. I have a TDM400 with two FXO ports. If I call from an internal extension to a landline and then hangup the landline Asterisk detects the busy signal

Hi, Running Asterisk CVS-Head latest on a Dual P3 800 1Gb Ram. For some odd reason now that I have the asterisk box almost to the stage I want it, I hit a problem. I have a te405p in the system, Zap/g1 is connected to the telco as an ISDN 30, Zap/g4 is connected by ISDN Primary Rate to an Ericcson BP250 phone system. When calls come in on g1 they go straight through instantaneously to the

How do you enable call waiting on sip phones? Ive looked and googled and can only find call waiting pstn phones butnot for sip. Is their a way of setting this up within the dailplan?

I'm still trying to learn some parts of Asterisk, so sorry in advance for the dumb question! How do I set up an extension to dial out to the PSTN through my ZAP interfaces? I want the ability to have a ring group that will ring all of the phones in an office and then ring cell phones if nobody answers. I'm sure this is simple to do but I'm at a loss. I have tried the following