similar to: Cisco phones 7940

Hi all, So I have been reading through the docs available online and the different threads on this list, but I cannot seem to get this phone to work. I have configured the OS79XX.TXT and SIP/SEP*.cnf files (see attached), when I configure the phone to point to my tftp server and reboot it I get this message: Connection received from 10.6.0.224 on port 50608 [09/02 12:16:11.750] Read request

Hi everyone, I googled this followed the instructions, but it hasn't work for me yet. I have universal setting in SIPDefault.cnf and phone specific settings in SIPXXXXXXXXXX.cnf. But it doesn't get registered. I need to register it on two different asterisk boxes. So my SIPXXXXXXXXXX.cnf looks like this: phone_label: "Zeeshan A Zakaria" line1_name: "523"

Can you also post information such as: Type of phone (model Number would be idela) How is it conencted, SIP, ZAP, IAX, Channel Bank. Corresponding config files would also help. Help us help you. >>-----Original Message----- >>From: asterisk-users-bounces@lists.digium.com >>[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of >>Paul A Brown >>Sent:

Hi, I am upgrading a Cisco 7960 phone from SIP V.5.1 to 6.0 and then will to go up to 7.5 However in my first attempt to go from V.5.1 to 6.0 this is hat happens: - The phone reboots - The phone then reads the file OS79XX.TXT from the TFP server. In the file I added the version "P0S3-06-0-00" - It starts upgrading firmware - Then I get the following message: (Upgrade Failed -

Running those versions of code, my 7960 will not register with Asterisk. The same 7960 is authenticating against another * server on line 2 just fine though - with the same settings in sip.conf. On the failing * server I am just getting 401 unauthorized errors on the console. From the phone's shell I get that t is registering, but not authenticated .1. from show reg. Any ideas would be

Anyone have experience with the 3-08-2 release of Cisco's SIP firmware? Are there any new features in the SIPDefault.cnf? Thanks, Ron

Folks, I have CISCO 7940g phone. I have in the past configured the phone with two lines. Having found the 2nd line wasn't much use, I want to remove it from the config. I have taken it out of the SIP config file that is TFTPd to the phone but it is still showing on the phone and it is still trying to log into Asterisk with that account. I have tried removing the config line and blanking

I am trying to convert my 7905G to be SIP based and seem to be running into a few hassles. Below are all the config files and logs from the server. I have tried to follow the pdf's from cisco and some posts from other mailing lists that google turnedup, but it seems that nothing is working. Am I somehow missing a fundamental step in trying to upgrade from Call Manager to SIP? Any help is

I have a stupid question. How do you remove line presentations on a cisco 7960 ? I have 3 line presentations I don't use anymore and I can't figure out how to remove them.

I've searched around and found a few similar situations where the phone will call out when using a Asterisk server but not receive inbound calls. My issue is a little stranger. If I call out from the phone then the phone will receive the next inbound call. The phone will not receive another inbound call until a call out again from it first. Any ideas? I am using SIP and am using the latest

Hi all, i have a problem with some cisco 7960. Yesterday i did a firmware-upgrade from 3.1 (1.2) with P0S30203.bin as described in the most documents. Now i get the message Phone unprovisioned and in TFTP-Log i find the following line: 07.03.2005 19:58 :Timeout error sending P0S3-07-3-00.bin to 192.168.0.83, 0 bytes So i think it now wants to load the file P0S3-07-3-00.bin. But i have not

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031207/e5e9b8eb/attachment.htm -------------- next part -------------- Hello all, I am newbie to Telephony world (IP and PSTN). Please excuse me if you find my questions very dumb. I am trying to configure my IP 7940 with the Asterisk, when phone boots up it only shows the message "Phone

Hi! I did manage to load phone with SIP image : SIP70.8-0-3S, made SEP-MAC.cnf.xml, but phone never read the configuration from it. On the screen it's written "Unprovisioned", and phone is not trying to register with asterisk. Please help!! MihaelaMJ -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Everyone, I am having some issues getting my 7961 working with Trixbox. I have loaded the SIP code (8-3-3SR2) fine but when the phone boots up it goes into an unprovisioned state. A status message shows up and says ?Error Verifying Config Info?. I have read quite a bit on this topic (getting 7961?s to work with Asterisk and TB) and only came across a few postings where other people

I have been trying to get multiple lines on the 7960 to work for several days. i have read all the posts I can find and have run multiple "sip debug" and have gotten no place on this. Here are the relevant section of the config files: sip.conf [scott] type=friend host=dynamic username=scott secret=scott context=default mailbox=6101 callerid=Scott Henderson [scott1] type=friend

I'm trying to connect a Cisco 7942 to my Asterisk box. I have a 7960 and 7912 currently connected and functioning. I'm trying to use the recommendations from here: http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP I have created a "XMLDefault.cnf.xml" and it took the latest image but the phone states it's unprovisioned? Any

I have three questions about my 7960 phone that I can't discern from the docs/wiki. 1st - If I change the SIPxxxxxx.cnf file to change registrations it sets up new lines as expected. If I delete a line it doesn't get removed when I reboot the phone. I have to go to the phone, unlock it, and reset the SIP parameters. How do I make it "forget" what it has programmed and

I've just recieved a copy of the new SIP firmware for the Cisco 7970, those of you with Cisco accounts may wish to try it (shock horror I'm sticking with SCCP). This coincides with the release of v8 firmware for all Cisco phones (and for those of you running Sergio's chan_sccp v8 works fine) The firmware is now also (and for the 7970 SIP, only) distributed in ".cop" files,

I'm starting out w/ a Cisco 7940, running the Sip image version 6.3. I've downloaded/installed asterisk via cvs. I've set the phone up to get its info via dhcp - the dhcp, tftp, astericks box & phone are on the same network. I've gone through and setup a test account per the instructions @ http://voip-info.org/wiki-Asterisk+phone+cisco+79xx but time I do a sip show

Hi all, I have seen similar discussions about this problem earlier, but I need some help here! I've been using this phone for allmost two years without any problems. Just about a week ago I had the phone unplugged for a few days and when I plugged it in again it had lost all settings, including the settings password. It was reset back to the factory default. Well, then I decided to enter