similar to: Asterisk Christmas Help request

Good morning everybody, Can someone explain to me the interconnection between these four things: indications.conf, SetLanguage(), zaptel.conf and ring-back ? If there is any !! :- ) I am having this case where some users cannot hear ring back from a DeadAGI script and it seems to be interconnected to these items. These users are from the iaxfriends table, they _can_ hear ring-back from a

extensions.conf has ignorepat => 9 exten => _9X.,1,Dial(Zap/G2/${EXTEN:1}) The first user to try it asked if instead of keeping the same dialtone after pressing 9, if I could play a different dialtone. Can this be done? I'm running asterisk 1.0.0 in case that matters.

I once (for a brief period) had dialtone, but I do know why :) Otherwise I get a boooop-booop-booop sequence. I cannot tell if this is the D-Link doing this, or asterisk... Who should be giving solid US dialtone? My indication.conf says: [general] country=us ... [us] description = United States / North America ringcadance = 2000,4000

Have a problem which can't find solution to on WIKI.. Trying to get * to use UK based indication tones. i.e. british ring, dial tone, busy signal. Have changed the indications.conf file to default to UK. However this seems to have no affect. What am i missing. Am using 1.0.3 stable. Many thanks Andrew. ---------------------- indications.conf [general] country=uk [uk] description =

Hi, I am having some issues with a new server install in Singapore. Outbound calls work fine. Inbound calls are not picked up by Asterisk. Zaptel 1.2.25 and Asterisk 1.2.28 both built from source. libpri installed wctdm and zaptel load without error Jun 6 23:34:03 fs01 kernel: [211138.372933] Zapata Telephony Interface Registered on major 196 Jun 6 23:34:03 fs01 kernel: [211138.372937]

Hi there i have some problems with some clients of my asterisk box, i have some cases when a client tried to make a call and there is no ring back only a silence and then the call hung up. I dont know why this is happening. I have the following stable asterisk version: CVS-v1-0-01/18/05-19:49:31 I did the an update a few days ago, the version that i had installed before was:

Greetings, fellow Asterisk users! I'm having problems with Asterisk and Digium's X100P (using kewlstart) in Finland - Asterisk doesn't detect POTS hangup. I've modified indications.conf according to the Finnish specifications (well, I think I got the specs correctly :-), but still no go.. Has anybody used * in Finland? Does your * detect POTS hangup (which plays the

Hello list, Hope you all doing fine! I've tried to use the 'alias' directive in the indications.conf file but apparently it doesn't work.... It looks like maybe this feature was removed, because old sample for the indications.conf file have example using the alias parameter, but newer samples don't have it anymore.... also I couldn't find any ticket saying this parameter

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

Hi, Not sure where to submit this to so I'll try here. Below is the toneset for Iceland. Hopefully this can be added into the asterisk package. [is] description = Iceland ringcadence = 1000,4000 dial = 425 busy = 425/250,0/250 ring = 425/1000,0/5000 congestion = 425+250/250,0/250 callwaiting = 600/100,0/100,600/100,0/9000 record = 1400/500,0/15000 info = !950/330,!1400/330,!1800/330,0

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

I've the following setup : sip phone -> ser (auth and routing) -> asterisk with capi isdn when I call a pstn number everything works fine, but I can't hear anything till the called answer. this is the output from a test call : -- Executing Playtones("SIP/2.7.184.61-08152880", "dial") in new stack -- Executing Dial("SIP/2.7.184.61-08152880",

I've had a few problems with my system holding the line after a call has been made, just now I rebooted and noticed the following in /var/log/messages Aug 13 17:23:15 Sheriff kernel: wcfxo: DAA mode is 'FCC' in the file wcfxo.c the following structure is initialised as below which would suggest that FCC is wrong for France or pretty well all of Europe. static struct fxo_mode {

Hi list, Has anyone been able to get ISDN-BRI support to work reliably on Asterisk 1.4? If so, I'd love to know how you did it (hardware, distro, kernel, modules, versions, config files). I've tried to get it to work on a Debian etch system with an HFC-PCI card and the zaptel package (v1.4.7, also from xorcom.com), but with no luck: all three channels that are created when the

Hello, I have a problem with connecting a Digium X100P card to a Brazilian analog line. Can somebody help me out with this problem? My /etc/zaptel.conf is loadzone=br defaultzone=br fxsks=1 My /etc/asterisk/indications.conf [general] country=br [br] description = Brazil ringcadance = 1000,4000 dial = 425 busy = 425/250,0/250 ring = 425/1000,0/4000 congestion =

Hey All, Having a bit of a problem with a Wildcard X100P card. When I try to make an outbound call using the card, it picks the line up and then only dials a single digit. I've confirmed it's only dialling a single digit by listening on a phone plugged into a parallel socket. Incoming calls work fine, it's only outbound calls I'm having a problem with. I've tried

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20031111/8683cced/attachment.pgp