Hey All,
Having a bit of a problem with a Wildcard X100P card. When I try to make
an outbound call using the card, it picks the line up and then only
dials a single digit. I've confirmed it's only dialling a single digit
by listening on a phone plugged into a parallel socket.
Incoming calls work fine, it's only outbound calls I'm having a problem
with.
I've tried searching the Wiki and haven't had much luck with Google
(could be my search terms)
I am in Australia and as far as I know I've set up the indications and
everything ok. My /etc/zaptel.conf looks like the following:
-----------------------------------
fxsks=1
loadzone=au
defaultzone=au
-----------------------------------
My /etc/asterisk/zapata.conf file looks like this:
-----------------------------------
[channels]
context=default
usecallerid=no
echocancel=yes
rxgain=6.0
txgain=5.3
group=0
signalling=fxs_ks
context=incoming
channel => 1
-----------------------------------
My /etc/asterisk/indications.conf looks like this:
-----------------------------------
[general]
country=au
[au]
description = Australia
ringcadance = 400,200,400,2000
dial = 425*25
busy = 400/375,0/375
ring = 425*25/400,0/200,425*25/400,0/2000
congestion = 400/375,0/375
callwaiting = 425/100,0/100,525/100,0/4700
dialrecall = !425*25/100!0/100,!425*25/100,!0/100,!425*25/100,!0/100,425*25
record = 1400/425,0/14525
info = 400/2500,0/500
-----------------------------------
When I try to make an outbound call through the card, I get the
following in the asterisk console:
-----------------------------------
-- Accepting AUTHENTICATED call from 203.33.246.1, requested format
= 256, actual format = 8
-- Executing Dial("IAX2[localpstn@203.33.246.1:4569]/1",
"Zap/g0|82814621|rtT") in new stack
-- Called g0
-- Zap/1-1 answered IAX2[localpstn@203.33.246.1:4569]/1
-- Hungup 'Zap/1-1'
== Spawn extension (localpstn, 82814621, 1) exited non-zero on
'IAX2[localpstn@203.33.246.1:4569]/1'
-- Hungup 'IAX2[localpstn@203.33.246.1:4569]/1'
-----------------------------------
Does anyone have any ideas what might be causing this behaviour?
Thanks in advance
Darryl
--
If you want to live up to the whole "There is more than one way to
do it" slogan, you have to give someone a swiss army chainsaw ...
